Front & Aftermarket Rear Camera + 1 video camera Interface for Select Ford Vehicles with 8” Sync 3 System
Product highlights
• Adds front and backup camera.
• Adds an extra video input.
• Uses the steering wheel control buttons to toggle between the sources.
• Retains factory backup camera.
• Dimension: 5" L x 2.5" W x 8.8" H
The Crux VRFFD-79D is a Front & Aftermarket Rear Camera + 1 video camera Integration Interface with for Select Ford Vehicles with Sync 3 System. The product uses steering wheel control buttons to toggle between the sources.
Authorized Usage/Limitations: This product should only be used while vehicle is stationary or when displaying fixed menus or for viewing rear-vision camera video when the vehicle is moving.
Product Liability Disclaimer: This unit must not be used for watching moving pictures while driving which is also prohibited by law in many States and localities. CRUX Interfacing Solutions and its distributors/dealers shall not be held liable for any consequential, incidental and contingent damages arising from misuse, but not limited to material damage or personal injury resulting, directly or indirectly due to any unauthorized usage of this product.
End User Agreement : End user agrees to utilize this product in accordance with the above mentioned stipulations and in compliance with all Local, State and Federal laws. If user does not agree with any of the above safety warnings, end-user shall be legally bound to immediately discontinue use and return this product to place of purchase.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
180011
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
100% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Do NOT purchase for 2020 Ford F250
The description says it will work, but it does not. You can not activate any camera while driving (main reason for cargo camera), when you hold down the seek button for 3 seconds while in reverse, your camera will not display (you have to stop, put it in drive, then put it back into reverse, then hold the button yet again to activate it), and you can not keep the front camera on for longer than 3 seconds when shifting into drive. I contacted CRUX and tried working with them to fix the issues and they finally said that they can not fix it. Sonic Electronix was supposed to wait until I was done with CRUX to move forward with an RMA, but they will only issue credit, not refund. I needed a refund because they sold a product that did not work as advertised, but that doesnt matter because the support team has ghosted me and wont respond any more. I would not purchase anything from this supplier since they wont stand behind the products they advertise and sell.
Verified purchase
29
found this helpful.Best selling similar products
• Retains factory backup camera when installing an aftermarket stereo
• Allows aftermarket camera to factory screens
• Fits select 2013-2016 Toyota and Scion vehicles
$32.99
• Pre-wired AXSWC harness (AXSWC sold separately)
• Compatible with select 2007-2025 vehicles from Nissan Vehicles
• Retains the factory backup camera to an aftermarket radio
• Includes the AXCSD-6V 12-volt to 6-volt converter
$42.99
• Retains the factory backup camera to an aftermarket radio
• Allows an aftermarket backup camera to be added to the OEM screen
• Compatible with display and navigation model radios only
$6.99
• Back-up Camera Add-on/Retain Harness
• Allows an aftermarket camera to be added to the OEM 4.3" color display radio
• Compatible with select 2006-2013 vehicles from Toyota
$29.99
• Aftermarket back-up camera add on harness
• Compatible with display and navigation model radios only
$15.99
NAV-TV AUDI DYNAMIC-INT (NTV-KIT700)
• Backup camera integration kit
• For select 2009-2016 Audi vehicles with internal MMi media system
• 2 composite video inputs (1 + 1 rear cam)
$599.00
• Plug & Play Installation Integration Harness
• For Ford CMAX Vehicles with MyFord Touch 8" Screen
• Activates Rear-View Camera Function via OBD II Port
• Forced Rear-view camera option
• Dimension: 5" L x 2.5" W x 8.8" H
$346.95
NAV-TV MB SPRINTER CAM KIT (NTV-KIT477)
• Rear View Camera Interface
• For 2014-2016 Mercedes Benz Sprinter Van
• Add Any Aftermarket Backup Camera to Factory System
• Plug-n-Play Installation
• Automatically Switches to Backup Camera View in Reverse
$499.00
• Backup camera interface with extra video input
• For Select 2014-2016 Chevy Sonic, Spark & Trax vehicles with MyLink 7" color media screen
• Displays a rear or front facing camera onto the MyLink color media screen
$289.00
• Rear & Front View Camera Inputs
• Optional coding of Park Assist to retrofit factory PDC
• Automatically switches screen to Rear-view when Reverse gear is engaged and to Front camera view when gear is engaged to drive
• Manual activation of the front camera using the steering wheel control button
• Plug & Play Installation
• Video in Motion function
• Dimension: 5" L x 2.5" W x 8.8" H
$346.95
