600W Peak (200W RMS) 6x8" Stadium Series 2-Way 3-Ohm Coaxial Car Speakers
Product highlights
• 300 watts Peak Each, 100 watts RMS Each
• 3/4" Aluminum Edge-driven Dome tweeters
• Fiberglass cone material
• Impedance: 3 ohms
• Sensitivity: 93 dB
JBL’s Stadium Series speakers bring iconic JBL sound that can only come from a 75-year pedigree of audio excellence to virtually any car on the road. Stadium’s Plus One™ fiberglass woofers deliver high-output, deep and robust bass. The high-resolution 3/4" edge-driven textile dome tweeters deliver soaring highs up to 40kHz. 2" and 3" midranges are available to upgrade two-way component systems into three-way. The compact 3" midrange speakers also offer a perfect plug-and-play solution with low frequency response to 300Hz, and high sensitivity.
Priced Per Pair
Internal Product ID:
183209
| 5 star |
|
60% |
| 4 star |
|
40% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
JBL Stadium Coax
I wanted to "love" these speakers but I can't. The sound changes drastically from low to high volume listening. If you set them up to sound good at low volume, when you crank them up the tweeters make your ears bleed. Tune the settings for high volume and they sound muddy at low volumes. Regardless of how much sound shaping I did, I could not tone the tweeters down to my liking. I didn't save the packaging so I wasn't able to return them. I replaced them with the NVX VSP65KIT and couldn't be happier. Depending on your sound preferences, these could be awesome speakers or terrible. They didn't work for me and my sound preferences.
Verified purchase
33
found this helpful.Jbl Stadium
These speakers are just what I needed my other speakers were clipping because they weren’t enough power with these at any volume I’m good these speakers are the best yet
Verified purchase
29
found this helpful.Everything was great and as always like doing business with the one and only sonic electronix.
Verified purchase
27
found this helpful.Amazing stadium like!!!
I had purchased the JBL Stadium 862F for my 09 Ford Flex with a Pioneer DEH 4400BT Head unit and powered by an Infinity Reference 3004a for both my front and rear doors. After setting the HPF @ 125 -12, these things turned out way better then expected. The clarity of the vocals and mids hits the sweet spot for an hour of listening. People from afar were enjoying listening as well. Just turn the gain enough without distortion and get ready to party. If the highs are too much to handle for listening, press the button on tweeters for -3 option to lessen the sharpness at high frequencies. Every item on my system is from Sonic Electronics. Thanks.
Verified purchase
6
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
• 75 watts Peak Each, 50 watts RMS Each
• 3/4" Silk-suspended Aluminum Edge-driven Dome tweeters with ferrofluid cooling and neodymium magnet
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 93 dB
$119.99
• 130 watts Peak Each, 65 watts RMS Each
• 3/4" tweeter and 1/2" super tweeter PEI (Polyetherimide) Dome tweeters
• Injection-molded Mineral-filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$99.99
• 150 watts Peak Each, 75 watts RMS Each
• 3/4" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$103.96
• 80 watts Peak Each, 40 watts RMS Each
• 1" PEI (Polyetherimide) Dome multi-direction pivot tweeters
• Graphite-reinforced Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
$119.95
• 225 watts Peak Each, 75 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters with neodymium magnets
• Polypropylene cone material with EVC™ (Extended Voice Coil) technology
• Impedance: 4 ohms
• Sensitivity: 90 dB
$71.96
• 360 watts Peak Each, 60 watts RMS Each
• 1" PEI-Polypropylene Balanced Dome tweeters
• Graphite-injected Reinforced Spun cone material
• Impedance: 4 ohms
• Sensitivity: 87 dB
$54.99
• 300 watts Peak Each, 100 watts RMS Each
• IP56 rating (water and dirt-resistant)
• 1" Terylene Dome pivoting tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohms
• Sensitivity: 93 dB
$124.99
• 120 watts Peak Each, 60 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 89 dB
$99.99
• 200 watts Peak Each, 50 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohms
• Sensitivity: 90 dB
$71.96
• 350 watts Peak Each, 80 watts RMS Each
• Dual 0.43" Polyethylene Terephthalate (PET) Dome tweeters
• Carbon and Mica-reinforced IMPP cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$66.99
