Access exclusive offers, news and more.
800W Peak (400W RMS) 10" Comp RT Series Shallow-Mount Subwoofer + 10" Sealed Enclosure
• 800W Peak
• 400W RMS
• Dual 2 ohm Voice Coil
• Injection-Molded Polypropylene Cone
• Tough Santoprene Surround with Interlocking Front Gasket
• Inverted-Bumped Back Plate and Bumped Top Plate for Voice-Coil Clearance and Excursion
• High-Temperature Voice Coil for Increased Power Handling
Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (0.77 cu ft airspace 10SQTC)
You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.
You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.
Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.
(newest, current model)
(previous model, replaced by Kicker 48CWRT104 + Belva MDFS10)
(previous model, replaced by Kicker CompRT CWRT102 (43CWRT102))
Internal Product ID:
Great box for the $.
Dropped a RF prime In and sounds great. Well built. Great value.
87found this helpful.
Box is well built, its hard to mess up building a small sealed box.. The only problem was sub opening wasn't large enough for my sub, 5 minutes with a jigsaw and vacumn took care of that though..
83found this helpful.
Decent Small Box
For the money it is a pretty good product. The carpet is a nice black. Very dark and very clean. The box is solid and can take a beating. The terminal cup is nice as its a binding post and not those crappy pressure tabs. Good box, decent sealing, good carpet.
84found this helpful.
Not much can really be said about a sub enclosure, other than it does its job well. My Rockford Fosgate P1S2-10 fit in snuggly. The only thing that was a tad iffy was that when drilling once the bit went through it would catch of the inside insulation and mess it up, but quite honestly it didn't really bother me at all. Good enclosure.
78found this helpful.
I totally recommend this product, excellent value! super fast shipping
90found this helpful.
Quality at a great price
I got this box for an Earthquake dbxi10 and thankfully the sub fit right in despite me thinking the measurements for the cutout were a bit off. The little bit of polyfill lining is a nice touch. The box felt secure and solid with a good bit of weight for the quality of wood. It definitely didn't feel like a cheap particle board box. The carpeting was on snug and looked good as well. Great pre-fab box for your sub. I expect it to last but can't say for sure as I just got it in recently.
86found this helpful.
Sturdy, fits like a glove not too big, not too small either. Can't make it for the amount they sell it.
84found this helpful.
This product is cheap, but is worth much more than the purchase price! It's built just as if I purchased a sub box worth 3 times as much! It was really easy to screw in the screws for my Alpine sub.
77found this helpful.
well built for price
i have a dvc pioneer 10" sub that fits perfectly in this box and sounds great. looks good in trunk and still gives me room to put stuff in it
82found this helpful.
High Quality Box!
I use this box for my Rockford Fosgate 10 and it sounds amazing in my hatch. Connectors felt solid, box felt solid. 100% recommend this!
79found this helpful.
This product is temporarily out of stock. May we recommend...
NVX SMW10D4 with Sealed Truck Enclosure
• 700 watts Watts Peak
• 350 watts Watts RMS
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Includes Depth Extension Clearance Plate
• Includes Sealed Enclosure
• Single Square 12" Subwoofer Enclosure
• Forced-Air Cooling
• Enclosure Dimensions: 11 1/16" TD x BD x 12 5/8" W x 4 1/8" H
Infinity Reference 1000S with Sealed Truck Enclosure
• Peak Power: 800 watts
• RMS Power: 200 watts
• Polypropylene Cone
• Rubber Surround
• Impedance: Single 2 or 4 ohms
• Includes Sealed Truck Enclosure
• 10" Amplified Loaded Subwoofer System
• Compatible with select 2007-2016 vehicles from GMC, Chevrolet Vehicles
• 250 Watt RMS
• Built-In Class D Amplifier
MTX Audio TNE212D Terminator Dual Subwoofer Package
• 400 watts Dual 12" Sealed Subwoofer Enclosure
• Single 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 11-1/8" TD x 13-1/2" BD x 29-11/16" W x 14" H
Save up to 10 different vehicles in your garage