• 12" GT Series Subwoofer
• GT Series Mono block Car Amplifier
• 450W Peak
• 150W RMS
• 12" Single Ported Subwoofer Enclosure
• Variable low-pass filter (40-200 Hz, 24 dB/Octave)
JBL's GT-BassPro12 powered subwoofer enclosure gives you the bass you and your vehicle deserve. Now you'll really be able feel your music's kick as you drive down the road. JBL designed this all-in-one bass system to shine in any car. It has been tuned for tight and responsive low notes.
Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.
Five Sheets of 18" x 32" (20 sq. ft.) Tri-Layer Sound Damping Material (Sound Deadening) Adhesive Black Foam Rubber
Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. It’s important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results.
The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicle’s service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips.
Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.
For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands.
Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the NVX SDRLR1 to press the mat down to the metal surface. Go across the entire surface with the roller to ensure that the sheet is installed properly.
Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations.
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
Overall rating distribution
By feature average rating
August 14, 2012
Don't know what the other guy is talking about.
This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.
The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.
I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.
Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.
All in all, you will not get a better value for the money.
January 31, 2014
Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.
Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.
I would recommend this kit to anyone who has a simple system. All around good kit.
December 19, 2013
I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.
June 22, 2013
Exactly what you need
Comes with everything you need, literally. Ring terminals are good quality, insulation is very good quality on the wires, fuse is good quality, currently connected 2x 600 watt Pioneer 6x9 speakers to a 450 watt amp (250RMS) with this wiring kit. Plenty of length to get from the battery to the back of my car. For 21$ this is a steal! Does its job, does it well. Highly recommend this, you won't beat this price for everything you get.
October 24, 2013
Price is right
This wiring kit is very good quality. Although this was my first subwoofer install, I consider myself an expert when it come any kind of stereo hookup. This kit comes with everything you will need for a professional install. I installed a MTX self contained in the rear of my 1999 Explorer Sport. This kit made eazy.
Best selling similar products
• Includes Everything You Need: Subs, Box, Amp & Wires
• Dual 12" Belva Subwoofers
• Monoblock Amp
• Ported Enclosure
• Complete Amp Kit w/ RCAs
• 1200W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting
• 600W Single 8" Sealed Subwoofer Enclosure with Built-In Amplifier
• 8" Subwoofer
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Variable lowpass / highpass / subsonic filter
• Variable Bass Boost: 0 - 12 dB
• 840W Max / 360W RMS
• Dual 12" Powered Vented Subwoofer Enclosure
• Built-in Class D Amplifier
• High and low level inputs
• Remote Level Bass Control
• Peak Power: 550W
• RMS Power: 200W
• Frequency Response: 30Hz - 150kHz
• Fuse rating: 25A
• Low Profile Amplified Subwoofer
• All-in-one bass solution with built-in amplfier
SUBBP12AM, SDRF20, BAK82
Internal Product ID: