Rockford Fosgate Punch P500X2 + NVX XLCA2 Line-Output-Converter + Amp Kit

Product Details:

• Punch Series Class A/B 2 ohms Stable 2-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 150 watts x 2 channel
• 2 ohms: 250 watts x 2 channel
• Bridged: 500 watts x 1 channel @ 4 ohms
• Total RMS power output: 500 watts
• LED Power/Protect Light
• Wired bass level remote control with optional Rockford Fosgate PLC2
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 1 pair of pre-amp outputs
• Signal sensing remote turn-on
• C.L.E.A.N. gain setup system
• Dynamic Thermal Management and MEHSA MOSFET cooling systems
• MOSFET power and output stages
• CEA-2006 compliant
• Input sensitivity: .15 - 12 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 85 dB
• Variable high-pass filter: 50 - 250 Hz
• Variable low-pass filter: 50 - 250 Hz
• Variable Bass Boost: 0 - 18 dB
• Fuse Rating: 80A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 13-3/8" L x 8-13/16" W x 2-7/16" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: P500X2

Product Details:

• Active 2-channel line output converter and line driver
• Designed to work with factory and aftermarket audio systems
• Speaker-level inputs handle up to 30V (225 watts RMS)
• Low-level RCA inputs handle 150 mV - 2 Volts
• RCA outputs Provides up to 9.5 Volts of output
• Adjustable xBOOST corrects for bass roll-off
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
• 12 Volt turn-on output for aftermarket amplifiers
• Selectable Ground Isolation switch to eliminate ground and alternator noise
• Molex terminals for speaker signal and power
• Wired remote bass level control included
• LED Clip indicator
• Total Harmonic Distortion: 0.001%
• Signal to Noise: >105 dB
• Frequency Response: 10-25,000 Hz
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Blue and Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Gray 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
6. One MINI-ANL Fuse Holder with a 80 amp fuse
7. One Black rubber firewall grommet
8. One 4 Gauge Blue chrome plated ring terminals
9. One 4 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties