MB Quart FA1-200.2 + NVX Line-Output-Converter + Free Amp Kit

Product Details:

• 2-Channel Class SQ (Class A/B) Amplifier
• RMS Power Output:
• 100W x 2 @ 2 ohm
• 50W x 2 @ 4 ohm
• Bridged: 200W x 1 @ 4 ohm
• The DC Signal Sense switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off.
• Variable electronic crossovers allow for complete control of the sound
• FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.
• Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled
• Variable High Pass Crossover 12dB Per Octave: 50hz - 500hz (Switched, Full / HPF / LPF)
• Variable Low Pass Crossover 12dB Per Octave: 50hz - 250hz (Switched, Full / HPF / LPF)
• Bass Boost: 0-9dB
• Variable Voltage: 0.2 - 9V
• Signal to Noise: >90
• Frequency Response: 10Hz - 45KHz
• THD: <0.5%
• Fusing: 15A x 2
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Features:

• Active 2 channel line output converter
• Designed to work with factory and aftermarket audio systems
• Speaker-level inputs handle up to 30V (225 watts RMS)
• RCA outputs Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
• 12 volt turn-on output for aftermarket amplifiers
• Selectable Ground Isolation switch to eliminate ground and alternator noise
• Molex terminals for speaker signal and power
• NVX XLOCXLC wired remote bass level control included
• LED clipping status indicator
• Features digital Bass-X enhancement function
• Separate high and low level inputs (balanced and unbalanced inputs)
• Selectable impedance load: 20, 60, 20k ohm
• Frequency response: 10 - 25000 Hz
• Signal-to-noise ratio: 110dB
• Total harmonic distortion (THD): 0.01%
• Dimensions: 3.23" W x 7.0" L x 0.96" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• Complete 8 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 600 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Blue 8 gauge power wire
2. 3 ft. (.91 meters) Black 8 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
6. One MINI-ANL Fuse Holder with a 60 amp fuse
7. One Black rubber firewall grommet
8. One 8 Gauge Blue chrome plated ring terminals
9. One 8 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties