2020-2023 Tesla Model Y - Custom Fit 10" Subwoofer Enclosure | NVX BE-TSLAY-G1P

Product Details:

• Custom-fit Sealed BOOST enclosure with 1 10" N Series Subwoofer (Passenger Side)
• Compatible with select 2020-2023 Model Y (5-seat models only)
• Not compatible with 7-seater models
• Made with hand-laid fiberglass shell covered in Carpet
• Enclosure finish matches the interior of your vehicle
• Installs easily in the storage cubby on the passenger side of the trunk
• Loaded with one 10" NVX NSW104v3 subwoofer
• Power Handling:
• Peak: 1000 watts
• RMS: 500 watts
• Final Impedance: 2-ohm
• Pressed Paper cone
• High Roll Foam surround
• Stamped steel vented basket with NVX punched logo
• 2" High temperature copper voice coil with aluminum former
• Progressive roll single-layer spider with integrated tinsel leads
• Optimized high-velocity pole vent
• 112 oz. Double stacked Ferrite magnet with protective rubber boot
• Driver side enclosure also available here
• Complete amplified bass system package available here
• Unloaded enclosure also available here
• Install guide available here
• Frequency Response: 20 - 200 Hz
• Sensitivity: 85 dB
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• V Series Micro Class D 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 240 watts x 1 channel
• 2 ohm: 400 watts x 1 channel
• 1 ohm: 600 watts x 1 channel
• Total power output: 600 watts
• LED Power/Protect Light
• Includes a Wired Bass Level Remote Control
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 4-way protection circuitry (thermal, overload, speaker short protection and DC offset)
• Balanced differential inputs eliminate noise picked up by signal cables
• Input sensitivity:
• Low level and High level: 0.2 - 10 volts
• Frequency Response: 20 - 500 Hz
• Total Harmonic Distortion (THD): 0.3%
• Signal to Noise Ratio: >85 dB
• Variable low-pass filter: 50 - 250 Hz
• Subsonic filter: 10 - 50 Hz
• Variable Bass Boost: 0 - 18 dB @ 45 Hz
• 8 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 6.49" L x 3.3" W x 1.48" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: VADM1v2

Product Features:

• Active 2 channel line output converter
• Designed to work with factory and aftermarket audio systems
• Speaker-level inputs handle up to 30V (225 watts RMS)
• RCA outputs Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
• 12 volt turn-on output for aftermarket amplifiers
• Selectable Ground Isolation switch to eliminate ground and alternator noise
• Molex terminals for speaker signal and power
• NVX XLOCXLC wired remote bass level control included
• LED clipping status indicator
• Features digital Bass-X enhancement function
• Separate high and low level inputs (balanced and unbalanced inputs)
• Selectable impedance load: 20, 60, 20k ohm
• Frequency response: 10 - 25000 Hz
• Signal-to-noise ratio: 110dB
• Total harmonic distortion (THD): 0.01%
• Dimensions: 3.23" W x 7.0" L x 0.96" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• Complete 8 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 600 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Blue 8 gauge power wire
2. 3 ft. (.91 meters) Black 8 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
6. One MINI-ANL Fuse Holder with a 60 amp fuse
7. One Black rubber firewall grommet
8. One 8 Gauge Blue chrome plated ring terminals
9. One 8 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties