Prime Series 200W RMS Class D 2-Channel Amplifier + Belva 4 Gauge Wiring Kit
Product highlights
• 50 Watts RMS x 2 @ 4 ohm
• 100 Watts RMS x 2 @ 2 ohm
• 200 Watts RMS x 1 Bridged @ 4 ohm
• CEA-2006 Compliant/Preamp Outputs/LPF
• On Board Punch EQ
Primed for Performance, the R2-200X2 amplifier is a 200 watt, full-range class-D, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
Rockford Fosgate R2-200X2
200W RMS Class D Prime Series 2 Channel Car Amplifier
Quantity: 1
Belva BAK42
4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - RED
Quantity: 1
Manufacturer:
Model Number:
R2-200X2, BAK42
Weight:
6.47lbs
Internal SKU:
r2200x2_bak42
Internal Product ID:
194763
| 5 star |
|
67% |
| 4 star |
|
21% |
| 3 star |
|
6% |
| 2 star |
|
5% |
| 1 star |
|
1% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Belva bak42
This item works okay, easy to install, and good for price.
189 found this helpful Helpful?
good package
Great value and worth your money as far as what you would need for an amplifier/subs system setup. Quality wires.
188 found this helpful Helpful?
impressed
I ordered this kit because it was fairly cheap but I have to say in very impressed with the quality of the wire as well as the thickness of the insulation. It was much thicker than I had anticipated and was pleasantly surprised.
190 found this helpful Helpful?
Wiring kit
Very quality wires and very pliable. Will definitely buy again
184 found this helpful Helpful?
Everything you need
This package comes with everything you need to install your amp and speakers. Great value.
177 found this helpful Helpful?
best bang for your buck
hooked up to my amp with ease subs bump all day long no problems installing except finding a good ground the ground wire could be a little longer but not a major problem.
180 found this helpful Helpful?
Not bad
It was pretty nice the wire was a little bigger than i thought (wire is about as fat as a sharpie marker just the wire not the insulation), the grommet that came with it was way to big for the wire so i didn't use it the fuse seems ok the connectors are good didn't have trouble crimping. I had to drill out the ring terminals a little but wasn't bad; wire insulation kind of soft and easy to puncture.
174 found this helpful Helpful?
not enough
first the terminals are too small for the gauge wire for the power and ground and fuse. a lot of the things that came with the kit didn't seem to have a place with the wires e.g. butt end connectors, cable terminals, all were too small for gauge wire included. im having to run out and buy pieces from my local radioshack. the remote wire has nothing to even connect to my head unit making have to go out and buy more materials to complete my install.
179 found this helpful Helpful?
Belva
Parts came fast, and seems to be a good quality for price.
175 found this helpful Helpful?
Ok product
The product works. Not the best quality though. The cables are pretty lightweight. If I did it again I would spend a little more money and get a higher quality cable.
177 found this helpful Helpful?
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper
1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps
(85)
$99.99
List price $114.99
