Hertz DCX570 with Speaker Installation Kit

Product Details:

• 5" x 7" Dieci Series 2-way Coaxial Car Speakers
• Power Handling:
• Peak: 240 watts per pair / 120 watts each
• RMS: 120 watts per pair / 60 watts each
• Water-repellent treated paper cone cone material
• Thermoplastic Polyurethane (TPU) speaker surround
• 0.6" PEI (Polyetherimide) Dome tweeters with neodymium magnets
• 1" pure copper voice coil, wound on conex former
• High-density Flux Ferrite magnet for large motor structure
• DIN size basket protected by abrasion-proof dust paint
• Tin-plated high-current terminals and silver-played lead wires
• Butyl rubber protected cover
• Epoxy glue for basket and motor system
• Low-carbon content plates for maximum magnetic permeability and high heat dissipation
• Top-mount Depth: 2.3"
• Cutout Dimensions: 5 x 7.2 
• Impedance: 4 ohm
• Frequency Response: 60 - 21,000 Hz
• Sensitivity: 93 dB
• Authorized Internet Dealer
• MFR #: Hertz DCX570.3
• 1-year Manufacturer's Warranty



Priced Per Pair

Product Details:

• 2-Piece 6x8" Self-Adhesive Silicone Rubber Speaker Baffles
• Contains 2 waterproof foldable silicone baffles with egg crate foam
• Includes self-adhesive foam base pads
• Foldable rings allow for perfect fitment at varying depths
• Creates a tight seal around your speaker for optimum sound quality
• Reduces door panel vibration
• Easy Installation with minimal trimming or cutting
• Designed for use with 6x8" speakers
• Mounting Depth: 1-1/4" (Front)
• Mounting Depth: 2-1/2 (Back)
• The foam baffles from the competitors will deteriorate over time, while the silicon XBAF68's will last a lifetime
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• Works flawlessly with NVX sound deadening mats and other major insulation brands
• Professional and heavy duty roller tool (used at car stereo shops worldwide)
• Unique squared rollers provides more pressure for better installation
• Allows for even pressure of application, reduce air bubbles and achieves the good adhesion
• 2" solid, soft rubber roller contours perfectly without scratching surfaces
• Features a thick sturdy plastic construction for comfortable handling
• Product dimensions:
• Roller Size: 1.89" H x 1.38" D
• Handle Size: 5.24" L x1.06" D
• Total Length: 7.28" L
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Core is based with 100% pure butyl rubber to withstand extreme heat
• No asphalt, tar, or cheap fillers - will not outgas, melt or fall off
• Waterproof barrier protects against moisture damage and mechanical oils
• Up to 30% thicker than cheap 50–80 mil alternatives
• Flexible aluminum backing contours tightly to complex door panels and vehicle curves with ease
• Structural damping kills unwanted sheet metal resonance caused by heavy mid bass
• Seals the door cavity to drastically increase speaker bass response and clarity
• Lowers cabin ambient noise so you hear your music instead of the highway
• Reflects radiant heat to help keep your vehicle interior cooler
• Simple three step peel and stick installation process makes upgrading your sound quick
• Combine this kit with NVX SDRLR1 Rubber Roller for easy installation
• Pack includes two 10" x 10" sheets
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Specifications:

• Install Location: Speaker
• Material Thickness: 0.091 (2.3 mm)
• Amount of Material: 1.38 square feet
• Material Use: Vibration Dampener
• Optimal Performance Temperature: 14°F to 140°F
• Rated Temperature Range: -75°F to 450°F
• Application Temperature: 60°F to 90°F
• Dimensions (each piece): 10"L x 10"W

Stop wrapping screwdrivers in electrical tape and hoping for the best. If you want to make your next installation smooth, and keep your interior immaculate, pick up a set of these Belva BTK105 Panel Removal Tools.

This set of nylon plastic tools make your job easier when it comes to pulling off those interior pieces, but it also keeps you from marring your finish. When you're done with the job, no one will know you ever pulled anything off in the first place. Make your next audio improvement a cinch with the Belva BTK105 Panel Removal Tools.

General Features:

• Five Piece Installer's Removal Tool Kit
• Durable Nylon Plastic Pry & Chisel Tool Set
• Helps with car stereo installation
• Use for dash & trim removal
• Perfect for door panel removal
• Use to remove vehicles emblems
• Use to remove rubber grommets
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty