See all parts that fit your 2017 A3
Ground Distribution Block with One 1/0 or 4 Gauge In and Two 1/0 or 4 Gauge Out
Product highlights
Ground Distribution Block • One 1/0 or 4 Gauge Input • Two 1/0 or 4 Gauge Output • Hard nickel-plated design • Corrosion Resistant • Heat-Resistant Acrylic Base • Non-Fused for Grounding Applications
Learn more about the tsdb8021
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
330W Peak (110W RMS) 6.5" Club Series 2-way 3-ohm Shallow Mount Coaxial Car Speakers
$79.95
List price $129.95
Best selling similar products
• Premium Series Distribution Block
• MAXI Fuses
• 1/0 or 4 AWG Input
• 4 or 8 AWG Outputs
• Nickel Plated • Includes Grommets and Wrenches
(13)
$44.99
List price $44.99
HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish
(31)
$16.99
List price $39.00
• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(40)
$23.99
List price $49.00
• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$33.99
List price $69.00
• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(29)
$13.99
List price $29.00
• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base
$69.99
List price $69.99
• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$28.99
List price $49.00
• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(21)
$14.99
List price $29.00
• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
(3)
$56.99
List price $63.99
• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations
$49.00
List price $69.00
Manufacturer:
Model Number:
TSDB-8021
Weight:
0.46lbs
Internal SKU:
tsdb8021
Internal Product ID:
20691
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Cleaned Up
This product is great and easy to hook up. I used it to split 2 ground wires to one ground. Very clean and looks good too
3 found this helpful
Amazing
I don't know why others are saying these feel cheap, they are perfect. I used them to install a capacitor between my kicker 750.1 and my battery and they work perfectly.
3 found this helpful
Perfect
This distribution block is nice! Haven't had any problems and it looks super clean and nice. Can't beat Sonic's price!
1 found this helpful
Great price
I really like these distribution blocks. They are tough and a low price. I bought two, one for power the other ground and they work great. If your running 1/0 guage wire these are very good.
2 found this helpful
Carries the load we need it to at
We make and sell the world's only 5,000 Watt expandable plug-and-play solar powered generator system, and this is the distribution block we use.
It's the only one on the marktet that will handle three single ought (1/0) cables, so we use it as the junction point for all the power in the whole system.
You MIGHT find one like it, but you won't find one better.
2 found this helpful
Perfect for my Amp
First, I had ordered the Monster 0 gauge cable and then realized my amp only allows 4 gauge. I bought the Monster adapters but they didn't work out. SO with this i was able to break down the 0 gauge to 4 gauge and allow my amp to get the power it needs. Looks great now
2 found this helpful
Perfect for what I needed.
I know a lot of shops and installers use circuit breakers these days but I needed a good power distribution block to fuse my two amps in my truck. Both amps did not have built in fuses so I needed a fused block to accomidate them. Sonic was the only outlet where I could find this type of block and the brand I wanted, and the price was right too. Cudos to Sonic. If u need this type of product this is the one to get and this is the place to get it!
2 found this helpful
tsunami
This is a great product. I have had it for 6 months. Running it at about 1200w, pushin 3 amps. It does it's job while saving you money.
2 found this helpful
very solid.
very solid, safe and it looks good. i am using this to split the power wire to the amp and my capacitor. i am happy. tsunami makes good things for cheap
2 found this helpful
works great
works great high quality, clips are flimsy I just used electrical tap to hold it down since it was put under my hood. the other reviewer mentioned 1/0 awg barely fitting but I didn't have a problem with it, when you get it look inside the ends and you'll see a reducer so that you can use smaller awg wires just back the screw all the way out and remove the reducer and 1/0 awg fits fine.
3 found this helpful
Digital Platinum Power Distribution Block w/ One 0/2 ga In & One 4/8 ga, One 2/4 ga & Two 8 ga Outs
(4)
$16.99
List price $29.99
Digital Platinum Power Distribution Block w/ One 0/2 ga In & Two 4/8 ga, One 2/4 ga & Two 8 ga Outs
(1)
$22.99
List price $29.99
Kicker 08ZX350.4 Factory Refurbished
(Factory Refurbished) 350W RMS, 4-Channel ZX Series Amplifier (ZX350.4, 08ZX3504, ZX3504)
$144.99
List price $349.99
6-1/2" Type-S Speaker Grilles for the Alpine SPS-610 and SPS-610C Car Speakers
(6)
$20.00
List price $25.00
280W RMS MX Series Class-D 4-Channel Marine and Powersports Amplifier
(2)
$379.99
List price $379.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
