Tested at 622W RMS on our Amp Dyno! (Rated 600W by Image Dynamics) High Fidelity Q Series Monoblock Car Amplifier
• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H
• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H
The Q600.1 Q series amplifier from Image Dynamics is the perfect amplifier if you are looking to power your subwoofers to the correct recommended power. This amp is rated at 250W RMS x 1 Chan. @ 4ohms, 400W RMS x 1 Chan. @ 2ohms and 600W RMS x 1 Chan. @ 1ohm. The amplifier utilizes the best electronics to produce the up-most quality and reliability.
The amplifier is also equipped with a variable bass boost, variable low-pass filter, and subsonic filter for finer tuning of your car audio system's frequencies. A 5-way system protection circuitry and soft start feature allow for complete protection of the amplifier but also of your devices. With its high end components and impressive features this amplifier is sure to produce a premium detailed musical performance.
Image Dynamics' Q600.1 monoblock amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings.
*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.
Internal Product ID:
22195
| 5 star |
|
67% |
| 4 star |
|
33% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great SQ Amp
Just got this amp installed. performs great Paired with My IDMAX 12" D2 @ 1 OHM. I usually have Two Subs In the Trunk but decided to run just one with a sealed box. Without a doubt this set up is more powerful than my last. This amp gets really hot because it has only two heat fins. Can not run this amp with my seats up. the wiring is 100% NVX OFC 4G wire with tight connections and a 1F Capacitor. Durability rated at 3 stars due to this overheating issue maybe would be two stars if this amp fails on me soon. I love the Power and Grace idea that Image dynamics stands by but the thermal design is killing this amp. I don't know if I would buy this amp again. I'll try setting up a forced cooling solution for the time being.
46
found this helpful.Excellent amp
This amp rocks paired with the IDQ12 it is driving. This amp has some power and I only have it turned up only halfway. Once I get around to fully tuning the system and crank it, my neighbors will probably hate me. I'm very satisfied with the quality and performance of this, now just need to add more matting to my car to kill some resonance.
41
found this helpful.ID Q600.1
Paid 150 for this bad boy. Had for 4 months strong before I decided to send a 5 hz sine wave throw it and blew it. None of the fuses even went. Worked well with the sundown E12. It wasn't very punchy though... I don't have good electrical and I'm not exactly sure if that was the problem but it seemed to excel in constant notes. It would get very hot as well, which may be the dirty power's fault. Definitely did rated though. Being class AB it was very inefficient. I keep voltage just as well with my current MB Quart onx1600.1D at near full power. Honestly, I wouldn't recommend it unless you're going for a system with good brand names. Can do much better at the same price and opposed to popular consensus I think my class d sounds better, but it has a lot more leeway too. It looks very classy and high quality though. Indifferent
10
found this helpful.
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
$179.99
• 670 watts x 1 channel @ 4 ohms
• 1100 watts x 1 channel @ 2 ohms
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohms Stable Monoblock Amplifier
$179.99
• 500 watts x 1 channel @ 4 ohms
• 850 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$149.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
$399.99
Rockford Fosgate Prime R2-1200X1
• 400 watts x 1 channel @ 4 ohms
• 800 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$409.99
