See all parts that fit your 1980 Midget
Pair of Bass Blocker / Passive Crossover; Removes 0-300Hz at 4 ohms, 0-150Hz at 8 ohms (BB1PR)
Product highlights
&bull Pair of Bass Blockers for 6" x 9" Speakers
• Blocks 0-300Hz @ 4 Ohm
• Blocks 0-150Hz @ 8 Ohm
• Filters Out Unwanted Frequencies Towards Speakers
270W Peak (90W RMS) 4" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$90.00
List price $99.99
460W Peak (100W RMS) 4” A Series 2-way 4-ohm Coaxial Car Speakers
$90.00
List price $110.00
Infinity REF407F (INFSPKRF407FUS)
210W Peak (75W RMS) 4" Reference Series 2-Way Coaxial 3-ohm Speakers
$87.95
List price $139.95
100W Peak (50W RMS) 6.5" Stage2 Gen 2 Series 2 Way Coaxial Speakers
$49.99
List price $69.00
70W RMS 4" C2 Series 2-Way Coaxial 4-ohm Car Speakers
$164.99
List price $189.99
Rockford Fosgate Punch P1 P142
120W Peak (60W RMS) 4" Punch Series 2 Way Coaxial 4-ohm Speakers
$109.99
300W Peak (100W RMS) 4” CS Series 2 Way Coaxial 4-ohm Speakers
$59.96
List price $84.99
| Crossover Frequency (Hertz) | 8 Ohm | 4 Ohm | 2 Ohm |
| 80 | 248.44 uF | 496.88 uF | 993.75 uF |
| 100 | 198.75 uF | 397.50 uF | 795.00 uF |
| 120 | 165.63 uF | 331.25 uF | 662.50 uF |
| 150 | 132.50 uF | 265.00 uF | 530.00 uF |
| 200 | 99.38 uF | 198.75 uF | 397.50 uF |
| 280 | 70.98 uF | 141.96 uF | 283.93 uF |
| 400 | 49.69 uF | 99.38 uF | 198.75 uF |
| 600 | 33.13 uF | 66.25 uF | 132.50 uF |
| 800 | 24.84 uF | 49.69 uF | 99.38 uF |
| 1000 | 19.88 uF | 39.75 uF | 79.50 uF |
| 1200 | 16.56 uF | 33.13 uF | 66.25 uF |
| 2000 | 9.94 uF | 19.88 uF | 39.75 uF |
| 4000 | 4.97 uF | 9.94 uF | 19.88 uF |
| 5000 | 3.98 uF | 7.95 uF | 15.90 uF |
| 6000 | 3.31 uF | 6.63 uF | 13.25 uF |
| 8000 | 2.48 uF | 4.97 uF | 9.94 uF |
| 10000 | 1.99 uF | 3.98 uF | 7.95 uF |
| 12000 | 1.66 uF | 3.31 uF | 6.63 uF |
|
(newest, current model)
|
|
(previous model, replaced by PAC BB-1PR)
|
Best selling similar products
Bass Blockers • Removes Low Frequency Sounds • 0-5.6 kHz @ 4 Ohm • 0-2.8 kHz @ 8 Ohm • Black Wire Color
(13)
$12.99
List price $19.00
&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts
(10)
$12.99
List price $19.00
• Pair of Bass Blockers For 6" Speakers
• Blocks 0-600 Hz @ 4 Ohm
• Blocks 0-300 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts
(12)
$16.99
List price $29.00
• Metra Bass Blocker
• Non-Polar 10% Capacitor
• 4 Ohm: 400Hz
• 8 Ohm: 200Hz
• 100 Volts
• 99 uf
• White Heat Shrinked Capacitor
• Yellow Color Coded Silver Wire
(6)
$9.99
List price $11.99
Manufacturer:
Model Number:
BB-1PR
Weight:
0.25lbs
Internal SKU:
bb1pr
Internal Product ID:
29980
| 5 star |
|
94% |
| 4 star |
|
6% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Works good
I had stock speakers and my headunit was over powering my 6x9s. I threw these in and ended up working pretty well.
53 found this helpful
Great product
I bought these to cut some bass out of the cheap 6x9s i accuqired from a friend, they worked great and cut out the distortion from the speakers. Its been six months now still going strong!
51 found this helpful
Good product
I purchased this product in the process of creating a overall good sounding system. I have two 15 Kicker CVX subs powered by a Hifonics 1700, so needless to say I had plenty of bass, the speakers I had were getting distorted when loud. I picked up 2 pairs of these and it was a world of difference. Great overall product.
50 found this helpful
nice
the easy install my(4) 6X9 sound great shipping was fast
50 found this helpful
They stop the rattle!
Added these to my door speakers (Infinity Kappa 5x7s) since my Kappa sub does all the low end work - solved my door panel rattle. Does good job of rolling off beneath 300hz. Wish it was adjustable, but thats what a crossover is for.
47 found this helpful
Helps a lot!
These were perfect to cancel out some unwanted frequencies going to my alpine and Rockford Fosgate speakers. Now there is less chance of them getting damaged when I crank my tunes.
49 found this helpful
Works
Blocked the base to my tweaters in my 2002 Mustang with factory Mach speakers.
45 found this helpful
exactly what i needed
I called sonic electronix and told him what I needed... exactly what I needed and works great
Verified purchase
37 found this helpful
Works great… for 4”x6”
Threw these in a order with 4x6 NVX speakers to get free shipping, they worked great in helping those little speakers keep up with the 6x9 NVX speakers I had installed previously. I don’t know why these are advertised for 6x9 when most car speakers are 4-ohm instead of 8-ohm, I could see a 6x9 needing to be cutoff at 150Hz but not 300Hz
Verified purchase
35 found this helpful
Bass Blockers
So when I had first bought this I was worried knowing I had a inline converter to my back door speaker to my sub well not only did it stop alot off bass coming out of the door speakers it also made my bass sound more clear I was impressed what these little things can do
Verified purchase
34 found this helpful
Single 12" Desert Digi Camo Vented SPL Subwoofer Enclosure
$164.95
List price $229.95
400W Peak (200W RMS) 1.9" 4-ohm OEM Replacement Pro Audio Compression Tweeters for Select 2002-21 Toyota and Subaru Vehicles
$95.95
List price $95.95
80W Peak (40W RMS) 3.5” DMD Series Full-Range Car Speakers with Adaptor for BMW
$109.99
List price $109.99
8 Gauge (3/4" Mounting Hole) Waterproof Firewall Grommet
(1)
$1.99
List price $2.99
SPL-LAB USB Noise Meter (Pro Edition)
Noise level meter with wide dynamic range.
$414.99
List price $414.99
Mounting Clamps for Stealth Soundbars with 1.5" Round Tubing
(1)
$37.99
List price $37.99
Single 12" Reptile Style Vented SPL Subwoofer Enclosure
$164.95
List price $229.95
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
