12" Dual Medium Pro Series Sealed Subwoofer Enclosure
12" Dual Small Pro Series Sealed Subwoofer Enclosure
• Premium carpeted Finish
• Silver Spring Loaded Terminal Cups
• Completely Miter and Dado Panels
• Glued and Braced with Fasteners
Engineered and manufactured using only the best additives throughout the production cycle. Hardwood MDF combined with true mitered corners and full inset dados. Atrend line of product is built for the high-end niche market.
From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.
![]() |
![]() |
Internal Product ID:
33909
Great sub box
Sub box produces good bass easy installation using box for alpine type s 12 in 2014 maxima
36
found this helpful.Sounds awesome, great quality
I have 2 Pioneer TS W3003D4 12" subs in this box. I was doubting the airspace but let me tell you, if you want these subs to last, and you want to run them at a true 1200 watts RMS, do yourself a favor and get this enclosure. Any bigger and you might wreck the subwoofer suspension or motors after a bit. The subs are VERY loud in it. I didn't want to deal with the whole prefabricated ported box crap (yet) and I did not want to pay $200 for a nice custom made ported enclosure. Plus, I really hate how ported boxes only allow you to play music a few hertz around tuning frequency. I wanted clean precise bass at all frequencies. Trust me sealed boxes CAN pound, and cleanly. Only thing I would STRONGLY recommend is you dont even use the speaker terminals on the box. I have my 12 gauge subwoofer wires ran through the box via a drilled hole, and into a 2 in 1 power/ground distribution block (1 distribution block for each sub, 4 wires in from sub, 2 wires out to amp), each distribution block has two 8 gauge wires going from it to my subwoofer amp speaker inputs. If you dont want to spend more money, you can just connect some 12 gauge wires straight to your amp through a drilled hole in the box as previously mentioned.
Drill a hole in each chamber, wire the subs with 12 gauge wire to the amp and seal the hole with a hot glue gun, or expanding foam spray and silicone. Let it dry overnight.
That being said, the bass on 2 12s in this box, and my SoundQubed 1200 mono amp is very loud and hits hard. Roof flexes and windshield flexes when I want it to. But of course, if I want very musical bass, this box does it flawlessly aswell. It does it all. Deep bass, low bass that shakes everything hard, and great punchy and "kicky" bass if you like Rock or Electronic music.
14
found this helpful.Great Value
This box is well built with a nice carpet finish, well worth the money!
12
found this helpful.Tight sound
Box is well built. Handles hard knock with no box vibration. Make sure you stuff the box with poly. Makes it sound twice as big
13
found this helpful.Box called for exact cubic ft that my subs called for
Good made box, thanks sonic, bought 2, need one more but out of stock
11
found this helpful.Great box
This is a very good constructed box, and the "carpet" finish is flawless. The spring loaded terminals are a breeze to use, and hooked up easily using 12 gauge wire. However, the reason for only three stars on ease of use was because the cutout diameter was slightly too big for the Alpine subs I installed. But because of the power supplied to them, I left the original baffle on the box and glued and screwed a new baffle with the correct size cutouts on the box and covered it with exact fabric. Can't go wrong with a double baffle lol...great box overall.
10
found this helpful.Nice Box for the money
Well built box that was purchased for (2)
Kicker 43CVR124... 3/4" mdf solid construction.
9
found this helpful.Great product
A great quality box would buy another build quality is awesome.
9
found this helpful.Atrend 12DQ
Its a really well built box the only thing i would change is the connectors they need to be updated to better ones.
9
found this helpful.Well made, excellent quality
After researching many sealed enclosures, I was able to speak with Sonic Electronics technical support (spoke with Jeremy). He was very knowledgeable and assisted me in many ways. He even went as far as emailing me sound graphs that correlate to the exact box that would work best for my 12 inch subs. Box is strong and very well made. Great Customer experience as well.
6
found this helpful.Best selling similar products
Single 12" Sealed MDF Subwoofer Enclosure (Belva MDFS12)
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals
(166)
$69.99
Dual 12" 3/4 MDF Sealed Subwoofer Enclosure (Belva MDFD12)
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals
(111)
$119.99
•10" Single Universal Truck Style Sealed Subwoofer Enclosure • Premium carpeted Finish • Silver Spring Loaded Terminal Cups • Completely Miter and Dado Panels • Glued and Braced with Fasteners
(2)
$69.99
1.5 Cu Ft - Single 12" Sealed MDF Subwoofer Enclosure (Belva MDFS1215)
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals
• 1.5 Cubic ft Box Volume
(49)
$99.99
Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)
• 0.77 cu ft Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals
(116)
$99.99
Save up to 10 different vehicles in your garage