See all parts that fit your 2014 1500
10" MTX TS8510-44 Thunder Square Series Subwoofer + NVX Sound Dampening Material
10" Dual 4 ohm Thunder Square 8500 Superwoofer • 1200W Max • 600W RMS • Black Anodized Aluminum Cone • Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material • Simple To Install • Increases sound quality and output
Learn more about the ts851044_sdbp4010" Dual 4 ohm Thunder Square 8500 Superwoofer • 1200W Max • 600W RMS • Black Anodized Aluminum Cone • Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material • Simple To Install • Increases sound quality and output
This Sonic Electronix Exclusive Bundle showcases a 10" Dual 4 Ohm MTX Audio Thunder Square 8500 Series Subwoofer. This subwoofer is rated at 600 watts RMS of continues power and 1200 watts of Max power. The subwoofer is equipped with a black Anodized Aluminum cone for rigidity and performance. It is also equipped with 1-3/4" voice coils , and spring loaded terminals for easy installation. With a spider plateau venting cooling system, this MTX Audio Thunder Square 8500 series subwoofer is sure to provide efficient sound and bass for long periods of time. In order to improve the all around sound of your audio car system, this bundle also includes ten 18" x 32" pieces of Dead Shield sound dampening material. This dampening material will help reduce engine noise, vibrations, road noise and rattling to give you a higher sound quality. Four step peel and stick application makes installation simple and efficient. This sound dampening material is sure to improve the over all quality and output of your system.
Best selling similar products
Manufacturer:
Model Number:
TS8510-44_SDBP40
Weight:
57.70lbs
Internal SKU:
ts851044_sdbp40
Internal Product ID:
37367
NVX!
Excellent product. Thicker and cheaper than dynamat and boy does it work well. Got 100 square feet of this and treated my entire vehicle. Road noise is reduced. Temperature is more even in the Cabin. Doors sound way more solid when closed(Used 3 layers on the inner most part of the door and one layer on the outer part, under the door skin, to seal it up) car stereo sounds amazing now. Even at highway speeds. I really recommend this product for a vehicle that is overly loud or if you are a car audio enthusiasts. Worth the $$ but set aside pleanty of time. Took my brother and I over 60 man hours! Lol
154 found this helpful
Wow good stuff
I bought the 20sq ft pack to do the roof of my 99 Toyota extended cab. This stuff is very thick and sticky. Went on no problem and is doing a great job. I only used three sheets to cover my whole roof area so I have two sheets left over. Time to buy more and put some inside of my doors. I am sure it will rock.
153 found this helpful
NVX Trunk Kit Sound Dampening Mats
I purchased the NVX Trunk Kit because it had the lowest price compared to Trunk Kits from Dynamat, Stinger & Ballistic. Since all the kits cover a 20 foot square area, I did not want to spend up to $80 more for basically the same product with a different name. It's Sound Dampening, how scientific is it? I've used Dynamat in the past and the only difference between Dynamat and NVX sound dampeners is the thickness. The NVX dampeners are a lot thicker, which makes them heavier. I don't necessarily want the added weight, but lining my trunk with the NVX Trunk Kit did make a noticeable (deeper sounding bass) difference in the way my 2 - 10" subs now sound as compared to before I lined the trunk. Installing the NVX Trunk Kit is the same as with all the others, again, it's Sound Dampening. I'm not talking about complex electronics here people. Those who disagree either work for Dynamat or Ballistic or have no clue.
154 found this helpful
NVX Sound Dampening
Bought this kit to help stop some very annoying rattling. It did the job! Helped alot with road noise too! Definitely made my system sound alot better. The whole kit covered my back deck, trunk lid, and front two doors. I'd definitely recommend this. I'm going to be ordering more in the summer to finish the rest of the car. It might be expensive but it was well worth it.
Three suggestions however.
1. Use gloves, other wise you have to use goo-gone to wash your hands. (Or panels you get this on). The paper scratches you up a bit too.
2. Make sure you clean the dirt off the panels, otherwise you'll waste this. It won't stick to dirty/dust.
3. Get the $9 roller, makes the job much less of a pain.
151 found this helpful
Why get anything else?
Can't really complain about a product that offers more than their competition for a cheaper price.
152 found this helpful
Great Deadener
Good heavy deadener. Better than Dynamat but cheaper. Go buy it.
145 found this helpful
Just what I needed!
The NVX SDTK20 kit is just what I needed for my trunk, and to my surprise there were a lot of sound dampener for the buck. Installation was a breeze, if you need to sonicelectronix has a video showing how to install.
142 found this helpful
NVX SDTK20
muy buen producto lo he colocado en mi ford fx2 2008 con muy buenos reultados cero ruido con el suboofer altamente recomendado
145 found this helpful
Handy stuff for the hard of hearing....
I am no audiophile--I bought this for my Jeep Wrangler, which like all variants of the original Jeep is a noisy beast, what with little insulation, knobby off-road tires, and a thousand protrusions creating horrendous wind noise. It was a challenge to even use my noise-canceling trucker's headset on a cell call. So I applied it throughout the foot wells front and back, mostly single layer with some overlaps here and there. It definitely reduced the interior noise level--not as dramatically as I hoped but I sure wouldn't take it out! Installation was ridiculously easy--its tacky but not so tacky that you can't pull and relocate a piece. I was surprise by how wrinkled the aluminum was in places--and nothing I tried smoothed it out. But it is entirely functional and as it is under carpet plus heavy duty floor mats, appearance is scarcely an issue. Its been down for about 2,000 miles and so far, no signs of wear. Other Jeep folks--consider putting it in the back cargo area, too. I didn't at this point, but may well do so soon--cut the road noise a bit more.
143 found this helpful
Great sound deadener.
I bought some of this because it was on sale at the time to see what it was like and it didn't disappoint. I put this on top of the Stinger and Dynamat that I already have in my truck. It was easy to work with especially with a roller and heat gun for the hard spots. So now I've got 4 different brand sound deadeners in my truck, 3 layers almost everywhere. I highly recommend the NVX deadener over the Dynamat which is way overpriced. This is easy to work, forms well and doesn't tear your hands up.
134 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.