Access exclusive offers, news and more.
150 Watt RMS Single 6.5" 6W3v3-4 Subwoofer Loaded in a Slot-Ported MicroSub Enclosure (4 ohms Final Impedance)
• 300W Peak
• 50-150W RMS
• Microsub Enclosure
• Final Impedance: 4 ohm
The CP106LG-W3v3 MicroSub is a compact bass solution for vehicles with limited space such as trucks or convertibles. This slot-ported enclosure is loaded with one 4-ohm 6W3v3-4 woofer. The W3v3 subwoofer is one of the cleanest, most efficient, and best sounding subwoofers in its class. The W3v3 features a DM Optimized Motor System that provides constant and strong linear excursion that result in reduced distortion and higher bass reproduction. These woofers also feature Elevated Frame Cooling technology that delivers cool air directly to the voice coil of the woofer. This increases power handling and sound quality. The W3v3 series subwoofers offer many more patented technologies that truly make this series stand out above the rest. If you are struggling on a decision, JL Audio will never disappoint.
The enclosure features top quality MDF (medium density fiberboard), cut using state-of-the-art CNC woodworking equipment, and covered with high-grade automotive carpeting. Extensive interior bracing permits the use of thinner MDF that maximizes the enclosure's internal volume relative to its exterior volume. Each driver is also protected by a black steel-mesh grille. It also features a side firing slot port. The flared port opening minimizes turbulence and improves overall fidelity. The port is a 1/2-inch high and 4-1/8-inch wide at the opening.
Every W3V3 subwoofer is built to exacting quality standards in JL Audio's Miramar, Florida factory. Each of the four models is a completely original design from surround to back-plate (even the bolts and screws used in assembly have been purpose-designed and manufactured to our specifications). Its this attention to detail that delivers the JL Audio quality and performance we have all become accustomed to.
JL Model Comparison
|Model||RMS Power||Cone Material||Surround Material||Sensitivity (dB)||Frequency Response||Xmax (mm||Terminals||Made In America|
|W7 Series||500-1500 Watts||Polypropylene||Foam Overroll||82.7 - 86.3||15-250 Hz||19-32||Push Terminals|
|W6 Series||600 Watts||Polypropylene||Rubber||82.7 - 85.4||20-200 Hz||19||Push Terminals|
|W3 Series||150-600 Watts||Polypropylene||Rubber||80.5-87.90||20-250 Hz||8.89-15.5||Push Terminals|
|W1 Series||150-300 Watts||Polypropylene||Rubber||83.9-86.1||22-200||8-11||Push Terminals|
|W0 Series||300-500 Watts||Polypropylene||Foam||84-88.20||20-250 Hz||11.4-12.7||Push Terminals|
|WX Series||200 Watts||Polypropylene||Foam||86-87.17||22-250 Hz||10||Spade Terminals|
Internal Product ID:
The Hot setup for limited space
I bought the sub almost a year ago. I have been amazed at its performance ever since. I put it in my race/street Cobra. A MTX 250wt mono amp powers this beast. It Hits almost as hard as the two 10's (in thunder form box) that I have in my Dodge Ram p/u w/ 1000wt mono
Probably the most underrated pre-made sub/box I have used, truly awesome performance.
I have read several other reviews from other sites, and was extremely skeptical, but I will agree, this is basically as good if not better than a budget 10" sub.
Pro's, awesome output for its size, and great tight response.
Con's, my carpet was already fraying out of the box, and the positive terminal was over tightened, and basically "stripped".
If you're limited on size, this will more than do it for you, I had less than 1/8th " to spare, and the box didn't let me down, I just wish the carpet was better.
Lastly, it does upset me they "Recommend" 150 watts RMS max, when, the driver is beyond underrated, be sure to throw some power at it.
Best selling similar products
• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
• Dual 12" 12W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo
• 3000W Max Dual 12" Vented Subwoofer Enclosure
• 12" L7S Subwoofers
• Thick MDF Construction with Thick Black Carpet
• Spring-Loaded Binding Post Terminals
• Enclosure Dimensions: 16-3/8" TD x 19-9/16" BD x 32-3/8" W x 16" H
Save up to 10 different vehicles in your garage