600W RMS, Class D Mono Block CX Series Car Amplifier
• RMS: 300W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Total Peak Power: 1200W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H
• RMS: 300W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Total Peak Power: 1200W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H
Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-2006 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make them compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.
Quality, Performance and Passion. That's Kicker Audio. Our trip to Stillwater Designs HQ gave us the opportunity to speak with Kicker's President and Founder Steve Irby and learn more about Kicker Audio. Check out the video and see why Kicker Audio provides the quality, performance and passion in car audio!
 |
 |
|
(newest, current model)
|
|
(previous model, replaced by Kicker CXA800.1 Amplifier (43CXA8001))
|
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Internal Product ID:
64240
| 5 star |
|
70% |
| 4 star |
|
20% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
10% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Wow
In this case size doesn't matter. This thing is tiny and packs a punch.
44
found this helpful.Excellent!!
I cannot say enough positive things about this amp. I had an extremely limited space for a subwoofer amp and tried this one mostly based on the dimensions. The amp is the exact same dimensions as the CX300.1 so I went with the this one figuring more power is better. I used it with one Kicker Solobaric L7 8" and it was way too much. I decided to have it run two L7 8" and it runs them extremely well. It could easily run larger subs but for me, again, space was limited. The amp never gets hot and sounds like it is much larger than it is. I would highly recommend this amp to anyone.
40
found this helpful.excellent value
my orders on time sales rep was very nice sonic has the best pricing
37
found this helpful.good amp
this amp is very tiny! like the size of a cheeseburger lol mines certified up to 627 true rms output and it is very powerful. i had two 12" kicker cvrs at a 2 ohm load and it was destroying my car because it was so loud!
37
found this helpful.VERY impressed.
I Bought this exact same amp at Fry's because I didn't want t wait for the delivery. By the way, mines has a certified 671 RMS output. I have it hooked up to 2 12" Kenwood Excelon Flat Sub woofers, 350 RMS each totaling 700 RMS for both (which means they are under powered) and mannnnnnn do they hit hard! I also have an Epicenter hooked up to the amp. I never owned Kicker products before, because I thought the brand was too over rated lol, I now think different. I'm very impressed!
32
found this helpful.WOW READ ME!!!
LISTEN, alot of people bash kicker and stillwater designs. I bought this expecting little and got ALOTTTTTT this thing pounds. it only got a tiny bit warm when I went full tilt at 2 ohms for 2 hours straight. It's so clean and loud and puts out alot of power. My birth sheet was 693rms at 2 ohms. Also the ease of the hi level inputs is great just tap a button and boom you switch from low to hi level instanly. If you need 600rms or less buy this right now its worth the money!!!!!
20
found this helpful.Terrible sound
Way over hyped pre set unchangeable crossover slope and subsonic filter is frustrating and not clean sound I promise you there is better options not impressed at all the good reviews need to go buy a higher and amp and see how much better it is
17
found this helpful.Good amp
Amp is under rated . Lots of power . Pushes my kenwood 1000w 10's just fine
14
found this helpful.Great Amp!!
Great Amp, pushing one 12 l7 in a ported box. Great for one powerful sub, but will need a bigger amp if you have 2 good subs
14
found this helpful.Great power!!
Paired with a pioneer champion. Deep clean bass! Very compact!
Verified purchase
13
found this helpful.
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Controls bass level and frequency and monitor voltage
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
$179.99
• 670 watts x 1 channel @ 4 ohms
• 1100 watts x 1 channel @ 2 ohms
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohms Stable Monoblock Amplifier
$179.99
• 500 watts x 1 channel @ 4 ohms
• 850 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$149.99
Rockford Fosgate Prime R2-1200X1
• 400 watts x 1 channel @ 4 ohms
• 800 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$409.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
$399.99
