• Marine Certified 10" Passive Non-Amplified Bass Tube
• RMS Power: 200 Watts
• Water Resistant Enclosure
• Salt, Fog, and UV Certified
• Impedance: 4 ohm
• Nickel-Plated Thumb Screw Terminals
• White Paint Finish
Introducing the Bazooka Marine Bass Tubes. They bring the superior performance of Bazooka products to the water and you will be able to hear the incredible difference. Each of these Bazooka Marine Bass Tube subwoofers are equipped with critical features that greatly enhance their performance and reliability in the harsh marine environment. In comparison to the other marine subwoofer enclosures, these Bass Tubes last longer and produce more accurate bass. The subwoofers and enclosures are waterprrof and can be mounted just about anywhere on the boat. In addition to all of this, they feature plated speaker terminals, stainless steel hardware, UV resistant enclosure, and a nylon composite mounting system for the tubes. Your boat will never sound the same.
Bazooka's highly efficient, customized woofers are specially designed and reinforced for use in the Bazooka Bass Tube enclosure, producing a pure piston action and generating the maximum bass output possible.
All Bazooka Woofers used in Bass Tube enclosures feature large, high excursion, lightweight foam edge rolls to maximize their efficiency and overall bass output.
A tube is a natural pressure vessel, and Bass is about pressure. The patented Bass Tube enclosure creates a natural, uniform, hydraulic transfer of the Bass energy produced by the woofer.
The port opening between the Tube Enclosure and the Port Tube allows for efficient transfer of bass. Bass Tubes enclosures utilize "Bass Reflex" technology to take advantage of both the forward and backward of the woofer, wasting no bass energy.
The bass energy created by both the forward and backward motion of the woofer are time aligned so that 100% of the woofer's output is concentrated into one output point.
Acoustic Damping Fiber
The acoustic damping material helps lower the resonance of the enclosure and simulates an increased air space.
The integrated amplifiers are performance matched to the specific woofers used in Bass Tube enclosures to ensure that every watt of power is efficiently turned into bass performance. Having the amplifier integrated into the enclosure simplifies the installation and eliminates power loss.
Bass Tube enclosures are specifically designed to take advantage of the natural amplification characteristics that occur when a subwoofer is placed into the corner of a vehicle. The corner acts like a megaphone, substantially increasing bass performance.
Installation is Simple! The bass tube comes with straps to keep the sub securely mounted, while still making removal quick and easy if you need even more cargo room. Optional Chrome-Plated UMS Brackets give a flashier look, as well as a more secure, permanent mounting when removal isn't a problem.
Overall rating distribution
By feature average rating
October 11, 2011
I purchased this as a replacement for a traditional sealed box with a 10" sub that I am using on my pontoon boat. The Bazooka fit exactly where I wanted it to go and it sounds so much better that my old sub. The output level works well with the 6.5" Alpine 2 ways and 4 channel Alpine amp it is paired with. The overall quality and build construction meets my expectations. So far, I have no complaints.
Being from Canada, my overall purchase and shipping experience was excellent and I have made other purchase since this one.
January 31, 2012
Wonderful waterproof Bad Ass Bass!
If your looking to add that missing thumping feeling at the bottom end of your current wimpy sound system, then this is it! The Bazooka MBT1014 and the rest of the Bazooka tubes series are all made out of a strong, waterproof and great sounding poly based body. Other subwoofer enclosures are just cheap carpet wrapped particle board. Particle board on a boat has no business being on board. Just a few drops of water or moisture in the air starts what always happens sooner or later, particle board enclosures start to swell, rot, mold and eventually crumble apart taking the speaker with it. The Bazooka MBT1014 enclosure has been an easy fit in many of the tight locations found in most boats. The bass enhancement is amazing when installed properly. The Bazooka bass tube line out performs other enclosures hands down. For getting that great sounding bottom end in your boat there really is no other product like the Bazooka brand line of bass tubes. I have been a mobile and marine electronics installer for over 25 years.
July 15, 2014
Honestly not what I expected to hear from these tubes. Very boomy due to thickness (or lack there of) of the tube itself. I put 1000 RMS PLUS to a pair of these and I dont think it hit 130db. Two 10" pioneer cheapys in a small 1.2 cu custom box hits disproportionately harder and just as deep.
Pros Light weight good for my boat....should do good enough firing into the hull.
Also looks like one escaped the box and got a chip...kinda sucks.
April 9, 2015
Simple and effective SUB
I own another model of this product and have it placed in my truck, this is what led me to purchase this item when adding a system to my boat. Bazooka makes it easy and simple to add an effective bass system to any mobile sound system not to mention simplifying installation and eliminating vehicle modification or damage trying to install other types of sub systems. Great sound and easy setup at a great price, what more could you ask for!
May 3, 2017
The Bazooka MBT1014 10" tube sounds great in my 18' runabout boat. I mounted it under the passenger side dash and tucked it up as high as possible in order to provide the maximum leg room underneath. I used both the nylon straps and mounts that came with the unit plus some white zip ties to attach it to the wooden/carpeted firewall, minimizing any potential movement. The lower third of the tube is visible from the side, and the speaker faces the left port side of the hull and bounces the bass back into the cabin area. The 8" version probably would have been a better fit in this particular application and not visible. However I opted for the 10" because of the nominal price difference over the 8" and because the 10" size is more common should I need to replace the speaker at a later date. I also opted for the MBT1014 because it's a passive speaker that requires an external amp. I did not want the version with the internal amp just in case the amp stopped working and needed to be replaced. I also believe the internal amp version uses a dual voice coil speaker at 2 ohms, and this MBT1014 comes with a single voice coil at 4 ohms - personal preference. I paired the MBT1014 with the Kenwood KAC-M3001 amp, also from Sonic Electronix. The amp is rated at 200 watts RMS x 1 at 4 ohms, but it's likely putting out more - search YouTube for the dyno test of the 4 channel version of this amp KAC-M3004 - really impressive. This is a great combination, and I would gladly do it again.
Both the speaker and the amp, both ordered separately from Sonic Electronix, arrived quickly and in great shape. Thanks Sonic Electronix.
On a separate note, I installed an inexpensive Boss marine MOV752WB.6 head unit with 240 watts RMS powering the four mid-range and high speakers with 60 watts RMS to each. I'm very happy with this entire setup.
This product is temporarily out of stock. May we recommend...
• Peak Power: 1000 W
• RMS Power: 400 W
• Polypropylene Cone
• Marine Rated Water Resistant Subwoofer
• Impedance: 4 Ohms
• Frequency Response: 20 - 200 Hz
• Peak Power: 600 W
• RMS Power: 200 W
• Waterproof sealing cone
• 350 Watts Max
• 175 Watts RMS
• Free-Air Design
•Injection-Molded Polypropylene Cone
• Co-Molded Santoprene Surround
• Polymer Basket to Resist Corrosion
• Large Ceramic Magnet
• Rated for UV and Salt-Fog Exposure
• Marine Certified 10" High-Power Amplified Bass Tube
• Water Resistant
• Salt Fog and UV Certified
• Nickel-Plated Thumb Screw Terminals
• White Paint Finish
• Velcro Reinforced Mounting Straps
• Magnet Size: 28 oz
• 800W Max / 400W RMS
• Thick ABS Tube Construction
• Spring-Loaded Speaker Terminals
• Flexible Horizontal or Vertical Mounting System
• CompR Woofer and Reflex Sub
• Thick MDF construction
Internal Product ID: