Great product that works reliably.Easy to install and use. Solved my stereo location issue.
Infrared Repeater IR Remote Eye Extender (IRX)
IR-X extends the Infrared signal from any wireless remote to control products that are hidden or out of the remotes line of sight. No need to modify equipment to extend the internal remote receiver.
- Easy two wire hook up
- Extra long, 17 feet plug-in wire for IR LED Red LED for confirmation of operation
- Small and easy to mount
- 40 kHz and 56 kHz operation
- 9-12 vdc operation
- VCR, DVD, TV tuners, stereos that are in trunks, glove box, under seats, or equipment just out of sight of wireless remote
- Great for RV's, marine, custom hot rods, and many other applications
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Cable / Wire Specifications
Please make sure that the wire you are purchasing matches the intended use.
Specials with this Item
Warranty and Return Policy
Summary of Customer Ratings & Reviews
August 24, 2012
Was looking for a simple IR repeater. Ordered PAC IR-X to control a modern radio hidden in the glove box of my 1966 Mustang. Works perfectly with my JVC remote/radio even on sunny days with the convertible top off.
45 of 54 found this helpful
August 28, 2012
I used the PAC IR-X so I could hide a modern stereo in the glove box of my otherwise original 1965 Mustang Convertible. You would never know the stereo or the remote are in the car. Very simple to install and operate.
41 of 48 found this helpful
San Diego, CA
February 6, 2012
I have owned this product for about 6 months now. I used it on my boat to control the stereo from the front of the boat, while the stereo is at the back of the boat. The IR receiver and transmitters are very small, and most people do not even see them. This device allows me to adjust volume, skip, and the rest of the functions my remote normally does from anywhere on my boat. I no longer have to "see" the head unit. The head unit is safe from the elements!
40 of 49 found this helpful
Panama city florida
February 13, 2014
I own a 1957 chevy truck and wanted to keep the dash looking stock with a radio delete plate. I had a sony stereo with bluetooth for my head unit. I mounted the stereo under the seat and ran the eye out to the steering wheel. I glued thin a thin magnet to the back of the stereo remote and it sticks to the dash pointing at the eye so i can control the radio. Not seeing the stereo is not a problem since i stream music from my phone. The only con to the product is the power box should be on the stereo end of the cable. I did not like having to find a spot behind the dash for the box and the wiring. If the box is by the stereo, the the power and ground can come from the stereo wiring harnes. Instead you only hace like 16 inches of wire to place where the remote can see it.
38 of 47 found this helpful
June 22, 2012
Total installation time was around 30 mins. Once you get your sensor positioning correct (one sensor needs to be positioned to receive the signal from your remote, the second sensor takes the place of that remote so you need to have it mounted in front of and pointed towards your head unit.) she worked all of the remote functions flawlessly. Had my head unit mounted in my glove compartment, no need to open the glove compartment door anymore to operate my radio.
35 of 43 found this helpful
Smiths Station, AL
January 23, 2017
I own a 1968 Chevrolet ss396 El Camino. While not extremely rare (5,193 built) it has its existing AM radio. It works and was fine for the first year or three I have owned it. I installed a modern Bluetooth radio inside the glove box. Old cars have metal glove box doors that the vf signal will not pass thru for the remote operation. Using the PAC IR-X unit I am able to use the remote without opening the door. Keep my original super sport looking all original inside
0 of 0 found this helpful
Las Vegas, Nevade
September 19, 2016
This worked fine when installed. Then, I decided to zip tie the receiver "eye" in place and ended up crushing the wires, so it stopped working. Be very careful on installation. There appear to be 3 wires going into the eye and they are somewhat fragile. Otherwise, it works as planned.
0 of 0 found this helpful
January 3, 2016
I used the PAC IR-X to allow my remote control signal to be sent to a head unit which is located in the trunk. My only criticism is the sensor wire should be longer to allow more flexibility in the position of the sensor relative the the main unit. Other than that the emitter wire is very long and the unit works very reliably. I am more than happy with the unit.
0 of 0 found this helpful
Internal Product ID
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.