Narrow Your Results
Price range:
$69.99 $2399.95
$
to
$

Minimum Impedance Unbridged:

Sonic Certified Amplifier:

CEA-2006 Compliant:

Amp Bluetooth Connectivity:

Class-D Amplifiers

4500W Peak (2200W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob

• 900 Watts RMS x 1 @ 4 ohms
• 1,100 Watts RMS x 1 @ 2 ohms
• 2,200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 4,500 Watts
• Built-in Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 8.5" W x 13.75" L x 2.125" H

$169.99

IN STOCK

900W Phantom Series Class D Full Range 4-Channel Amplifier

• RMS Power: 145 watts x 4 @ 4 ohms, 225 watts x 4 @ 2 ohms
• 450W RMS x 2 Channel @ 4 ohms Bridged
• Tri-Mode Capable
• 3-Way System Protection
• Variable Low-Pass Crossover
• Variable High-Pass Crossover
• Band-Pass Crossovers
• Input Source Selector

$179.99

IN STOCK

1200W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

• RMS: 400W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 12.00" L x 2.10" H

FREE 100% Copper, True 4 Gauge Wiring Kit with Select Amps

$549.99

IN STOCK

Only 1 Left!

2500W Peak (1250W RMS) Edge Series 1-Ohm Stable Class-D Monoblock Amplifier

• 400 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1250 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2500 Watts
• Military Grade PCB w/ PWM MOSFET power supply
• Variable low-pass filter: 30 - 250 Hz
• Subsonic filter: 20 - 50 Hz
• Variable Bass Boost: 0 to +18 dB bass boost

Don't Forget an Install Kit with Your Amplifier Purchase!

$129.99

IN STOCK

Only 2 Left!

400W 4-Channel Class D Prime Series Full Range Amplifier

• 75W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 200W x 2 Chan. @ 4 ohms Bridged
• Variable Bass Boost
• Variable High-Pass Crossover
• CEA-2006 Compliant

$169.99

AVAILABLE

Ships at Later Date

650W Monoblock iON Series Class D Digital Amplifier

• RMS: 400 x 1 @ 4 ohms, 650W x 1 @ 2 ohms
• Total RMS Power: 650W
• Class D Circuitry
• Bass Boost: 0 - 12 dB at 45 Hz
• Wired Bass Remote Included
• Dimensions: 5-5/16"W x 9"L x 1-11/16"H

Add a 4 Gauge Installation Kit to Your Purchase!

$109.99

IN STOCK

250W Mono Block V-Power Class D Subwoofer Car Amplifier

• RMS Power: 150W x 1 @ 4 ohms, 250W x 1 @ 2 ohms
• Total Peak Power: 250W
• CEA-2006 Compliant
• Dimensions: 7-1/2" W x 7-7/8" L x 2-3/16"H

Add a 100% Oxygen Free Copper, True 8 Gauge Amp Kit

$109.99

IN STOCK

4000W Tarantula Electro Series Mono-Block Class D Car Amplifier

• RMS: 700W x 1 @ 4 ohms, 1300W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total Peak Power: 4000W
• Dash Mount Gain Control Module Included
• Multi-color RGB LED Illumination Accent Lighting
• DataLink for Strapping Two Amps for Double Power
• 9"W x 18"L x 2.5"H

Add a 100% Oxygen Free Copper, True 1/0 Gauge Amp Kit

$239.99

IN STOCK

Only 2 Left!

Class-D Monoblock 1000W DRVN Series Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 10-1/4" W x 11-13/16" D x 2-3/8" H

Get 20% off an NVX Universal Remote Level Control

$99.95

IN STOCK

Only 2 Left!

3200W Peak Zeus Series Class-D Monoblock 1-Ohm Stable Amplifier (ZXX184001D)

• 800 Watts Peak x 1 @ 4 ohms
• 1600 Watts Peak x 1 @ 2 ohms
• 3200 Watts Peak x 1 @ 1 ohm
• Total Peak Power: 3200 Watts
• Low-Pass and Sub-Sonic Filters
• Variable Bass Boost
• Aluminum Heatsink
• 20" W x 10" L x 2.4" H

$219.99

IN STOCK

Only 2 Left!

400W Peak Ultra Compact Monoblock XC Series Micro Class D Marine Amplifier

• 200 Watts RMS x 1 @ 4 ohms
• 300 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 400 Watts
• CEA-2006 Compliant
• 0 to +12 dB bass boost at 50 Hz
• Nickel heat-sink for extreme heat dissipation
• 7.85"W x 3.23"L x 1.54"H

$129.99

IN STOCK

400W 4 Channel Class D Compact Digital Car Marine/ATV Amplifier

• RMS Power: 45W x 4 @ 4 ohms
• Total Peak Power: 400W
• CEA-2006 Compliant
• Dimensions: 5-1/2" W x 3-9/16" D x 1-5/16" H

Add an NVX Universal Bluetooth Controller to Your Purchase!

$99.99

IN STOCK

3000W Max Pulse Series Class D Monoblock Power Amplifier

• 563 Watts RMS x 1 @ 4 ohms
• 750 Watts RMS x 1 @ 2 ohms
• 1500 Watts RMS x 1 @ 1 Ohm
• Total Peak Power: 3000 Watts
• Frequency Response: 15Hz - 150Hz
• Variable low-pass filter: 50 Hz to 150 Hz

Add a 1/0 Gauge Installation Kit to Your Amplifier Purchase!

$109.99

IN STOCK

600W 4-Channel Digital Low Profile Series Class D Car Amplifier (Made in Korea) + Free 8 Gauge Amplifier Wiring Kit with 4-Channel RCA Interconnects

• RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Total Peak Power: 400W
• Pulse Width Modulated MOSFET Power Supply
• 4-Way Protection Circuitry
• Complete 8 Gauge 4-Channel Amplifier Installation Kit
• Designed Specifically For Car Audio Systems Up to 500 Watts RMS
• Premium Power and Ground Wire Provides Optimal Power Transfer
• Mini-ANL Fuse Holder With A 60 Amp Mini-ANL fuse
• 30% Copper CCA Wire

$85.83

IN STOCK

Only 1 Left!

4500W VFL Series Class D Mono Hybrid Car Amplifier

• 4500W VFL Series Class D Mono Hybrid Car Amplifier
• MAX Power at 1 Ohm: 4500 x 1
• Remote bass knob
• Frequency Response: 15Hz ~ 300KHz
• Signal to Noise Ratio: 85db
• Four way protection: DC, Speaker short, Thermal, Voltage

Add a 1/0 Gauge Installation Kit to Your Amplifier Purchase!

$299.99

IN STOCK

Bluetooth-Enabled All-Terrain Controller with Class D Amplifier

• Class D amplifier pushes 150W max power x 2 channels
• IPX5 rated, water resistant and dustproof
• A2DP audio streaming
•Surface, flush and roll bar mounting, fits 3/4", 1", 1-1/2", 1-3/4" and 2"
• FEATURE 5
• FEATURE 6
• FEATURE 7

$69.99

IN STOCK

1000W Consumer Line Series Class D Monoblock Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 6.93" W x 11.34" L x 2.16" H

Add a Wiring Kit and Capacitor with Amp Purchase!

$159.99

IN STOCK

1000W RMS Punch Series 5-Channel Stereo Full-Range Class AB / D Car Amplifier w/ Dedicated Sub Channel

• 75W x 4 Chan. + 200W x Sub Chan. @ 4 ohms
• 100W x 4 Chan. + 400W Sub Chan. @ 2 ohms
• 100W x 5 Chan. RMS
• Built In NOMAD "Real Time" Analog Computer
• 5/4/3/2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

Add a 6 Channel Amplifier Installation Kit to your Purchase.

$439.99

IN STOCK

Only 2 Left!

3000W Consumer Line Series Monoblock Class D Amplifier

• RMS Power: 1800W x 1 @ 4 ohms, 3000W x 1 @ 2 ohms
• Total Peak Power: 6000W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 7" W x 27.9" L x 2.2" H

$379.99

IN STOCK

800W Peak (400W RMS) DRVN Series Class-D 2-Ohm Stable Monoblock Power Amplifier

• RMS: 4 ohm: 250 Watts x 1 chan.
• RMS: 2 ohm: 400 Watts x 1 chan.
• Total Peak Power: 800 Watts
• Speaker-level (high-level) inputs
• Variable low-pass filter: 50 - 200 Hz
• Variable Bass Boost: 0 to +18 dB bass boost

$99.95

IN STOCK

Only 2 Left!

Items per page: 20 50 100

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Get The Right Gauge Wire
Understand what gauge works best for your amp.
Read Guide
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Get The Right Capacitor
Reduce the strain on a vehicle's electrical system.
Read Guide
Sound Processors

Sound Processors Q & A

For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.