(2) KICKER 43C104 Comp 10" 600w Car Subwoofers+Amplifier+Amp Kit+Vented Sub Box

Product Details:

• 10" Dual Ported Subwoofer Enclosure
• Durable 3/4" Medium Density Fiberboard (MDF) construction
• Mitered edge construction provides cleaner finish
• Miter joints feature over 41% more surface area
• More surface area translates into a stronger bond
• Dado joints offer an 80% increase in surface area
• Built using trick glue for up to 3600 PSI holding ability
• Glued and braced with fasteners for added strength
• Premium black carpeted finish for sleek modern look
• Silver spring-loaded terminal push cups
• Maximum subwoofer mounting depth: 15.65"
• Subwoofer cutout diameter: 9.13"
• Box volume: 1.25 cubic feet (per chamber)
• Total box volume: 2.5 cubic feet
• Dimensions: 30" L x 12" H x 17" W
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Port Specifications:

• Rectangular port
• Number of ports: 1
• Port length: 2.50"
• Estimated port tuned frequency (fb): 36 Hz

Product Details:

• CX Series Class D 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 150 watts x 1 channel
• 2 ohm: 300 watts x 1 channel
• 1 ohm: 400 watts x 1 channel
• Total RMS power output: 400 watts
• Wired bass level remote control with optional Kicker 46CXARCT
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 1 pair of pre-amp outputs
• Three-second turn-on/off delay to eliminate unwanted interference
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look
• Input sensitivity:
• Low level: 125mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 25 - 200 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: >95 dB
• Variable low-pass filter: 50 - 200 Hz
• Subsonic filter: 0 - 25 Hz
• Variable Bass Boost: 0 - 6 dB
• Fuse Rating: 40A
• 8 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 8-1/8" L x 6-11/16" W x 2-5/16" H
• Authorized Internet Dealer
• 2 Year Manufacturer's Warranty
• MFR #: CXA400.1

Product Details:

• This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable
• The best hardware, signal and power cable comes in one convenient package
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

What's in the Box?

• 17 ft 8 awg blue power wire
• 4 ft 8 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 60 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 8 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots

General Features:

• 16 Gauge Speaker Wire
• High strand count for maximum flexibility
• Ultra-flexible PVC blended jacket for easy installation
• Packed in resealable bag
• Length: 7m (23 Ft)
• Also available in 12 Gauge
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty