Universal-Fit Audio for 1976 BMW 2002

---

• Replacement Transmitter
• Four-Button Design
• One-Way Paging Remote
• LED Indicator

• Weatherproof Bluetooth Marine Receiver
• For use with hideaway remote audio receiver or dash-mount controller
• Connects with up to 35 ft (11 meters) of wireless range
• IPX8 marine-grade rating

• 1 Pair (1 negative, 1 positive) of. Side-Post to Top-Mount Battery Terminal Adapters
• Forged and machined brass construction
• Marine-grade, anti-corrosive Stannum plating

• 12-volt Absorbent Glass Mat (AGM) Secondary Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 750W car audio stereo systems
• Compatible with most vehicle applications

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Paper cone
• Foam surround
• Sensitivity: 87.4 dB

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.6 dB

• IR Remote Controller for multimedia receivers
• Mode switch: AUD mode/DVD mode/TV mode
• Includes 2 AAA batteries

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 16mm (5/8") mounting hole size
• Red LED illuminated ring

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• 1/0 AWG Inputs
• 4/8 Gauge Outputs
• Flat Black Finish
• Compact

• 8 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• Extension cable perfect when installing an FM modulated multi-disc CD changer, or other FM modulated tuner like a Satellite Radio box
• Also works with hideaway "brain" units from multimedia receivers

• Ported enclosure with 1 12" Solo-Baric L7S Series Subwoofer
• 750 watts RMS (1500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/4" L x 16" H x 14-3/4" W x 17-7/8" W2

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

•10" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference

• 600 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 3 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in White

• Universal Double DIN housing
• Designed for the installation of Double DIN radio
• Can be mounted on top or underneath any surface

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 10" Subwoofer Mesh Grille Insert for W6v2 and W6v3 Subwoofers
• Powder-coated steel mesh grille in satin black finish
• Protects subwoofers against potential damage

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• USB / HDMI / Auxiliary Replacement Panel
• Replaces the factory USB and auxiliary panel
• Compatible with 2015-up vehicles from Chrysler, Dodge, and Jeep

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

8" Grille made specifically for the JL Audio 8W1v2, 8W1v3, 8W3v3 Sub • Provides the Best Protection Possible • Top-Notch JL Audio Quality • Metal Mesh Grille Painted Black

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 25

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Direct wire power cord
• Designed for laser and Radar detectors
• Prevents interference with driving functions
• Compatible with Passport 8500, 9500iX, Solo S3 and S4 Models
• Installs in vehicle fuse panel

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• Equalizer under dash mounting bracket
• Fits WS420-BT or WS220-BT equalizers (sold separately)
• Made with tough black billet brushed metal finish
• Mounting hardware and screws included

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3 cubic feet
• Compatible for Sundown SA 15V2 subwoofers (Sold separately)

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 84.87 dB

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• 1.8" NEO Series Pro-Audio Bullet Tweeters
• 100 watts Peak Each
• RMS Each
• 4 ohm Impedance

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 2-channel RCA ground loop isolator
• Easily eliminates unwanted ground loop noise
• No need for additional adapters
• Universal vehicle application

• Pair of 2-Way Universal Pod for 6.5" loudspeaker and 1.5" tweeter
• Enclosure comes in 1 set (left and right)
• Injected high density ABS plastic construction
• UV protected and all-element ready

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch