Universal-Fit Audio for 1982 Ford E Series

---

• 4 band-Band Graphic Equalizer
• 3 setsof preamp outputs (front, rear and subwoofer)
• 9.5 volts max preamp outputs
• Subwoofer frequency and level control

• Universal underseat amplifier bracket
• Designed for Jeep JL and JKU front seat configurations
• Includes nutserts and drill bit for easy installation

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Mount depth: 7.58"
• Sensitivity: 86 dB

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• SoloKon Polypropylene Cone
• Blue-stitched Santoprene Rubber Surround
• Mount depth: 7-1/8"
• Sensitivity: 85.4 dB

• 4" Pro-Audio Bullet Tweeters
• 480 watts Peak Each
• 240 watts RMS Each
• 8 ohm Impedance

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 2400 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• 12" Single SPL Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 1.75 cubic feet

• 10" Single Sealed Truck Subwoofer Enclosure
• Medium Density Fiberboard (MDF) construction
• Compatible with ZERO 10 subwoofers (Sold separately)

• Universal Rear View Backup Camera
• Mounting Style: Flush Mount
• Viewing Angle: 120 ° (wide view)
• Resolution: 656 x 492 
• Waterproof: Yes (IP67-rated)
• Nightvision: Infrared LED's (3-5m distance)

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 2-11/16"
• Sensitivity: 81.8 dB

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6.5"
• Sensitivity: 83.21 dB

• 8 Gauge Amplifier Installation Kit
• Includes RCA Interconnect Cables
• Made from 100% Pure Crystal-Oxygen Free Copper
• Includes Wire Termination Hardware
• CEA-2015 Compliant

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.0"
• Sensitivity: 87 dB

• 1/2" split-braid sleeving
• Protects wires, cables, hoses and more
• Protects against salt water, solvents, automotive chemicals and more
• More flexible than plastic
• Resists cuts and other abrasions

• 33-ohm/5-wat load resistors for amplifier integration
• Required when the factory amp or radio needs a speaker load to say operational
• Pack of 5

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• SoloKon Polypropylene Cone
• Blue-stitched Santoprene Rubber Surround
• Mount depth: 7-1/8"
• Sensitivity: 85.4 dB

• RMS Power: 400 watts
• Impedance: Dual 8 ohm
• Polypropylene-Mica Cone
• Rubber Surround
• Mount depth: 3.25"
• Sensitivity: 82.27 dB

• Compatible with All NXL-X & CF-X Series Hydro Towers
• Extra Heavy Duty Pole Clamp
• Fits Towers 2.25", 2.5", 2.75" and 3"
• Color: Black

• Digital Remote Start System with Bluetooth
• Integrated data bus interface
• Onboard Bluetooth for programming and control
• Features 3X lock start from OEM remote

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Composite Fiber cone
• Rubber surround
• Mount depth: 4.45"
• Sensitivity: 87.5 dB

• 10" Dual SPL Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 2.7 cubic feet

• 37-piece BMW universal tool kit
• Contains tools for installing speaker, subwoofer, or amplifier
• Comes in a high quality cotton case
• Compatible to use for vehicle and for general use

• 1-Way 4-Button Remote Start and Car Alarm LED Transmitters
• Includes (2) 1-way transmitters
• 1/4 mile range for 2-way remote
• Compatible with Viper DS4 and DS4P security systems

• 10" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-in amplifier
• Variable bass boost
• Speaker level inputs
• Wired remote bass level control

•Dual 10" 10W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• Polaris OEM Stereo to Aftermarket Subwoofer Output Adapter
• Allows connection of aftermarket amplifiers and speakers
• Designed for use with MTX 2879459 Audio Pod

• Peak Power: 8000 watts
• RMS Power: 4000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 24.00"
• Sensitivity: 92 dB

• 1 inch diameter
• 50 percent heat shrink tubing
• Length: 4 feet

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performanc

• Replacement LED headlight bulbs
• Good for tight applications
• Compact design doesn’t compromise performance
• Output of 6,000 lumens of cool white (6500K) illumination
• Single Beam
• Sold as a Pair

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Premium plush black carpet finish
• Carbon fiber pattern
• Signature miter and dado construction
• Bonded using proprietary trick glue
• Total box volume: 4.59 cubic feet

• Impedance Meter/Signal Generator
• Obtains Driver's T/S Parameters
• Find Tuning Frequency of Passive Radiator
• Locate Rattles in Vehicle

• 12" round mesh subwoofer grille
• Compatible with most Kicker legacy subwoofers

• 12 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Front and Rear Door
• Pack includes four 12" x 36" sheets

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Multifunction Cable - 25 ft. (7.62 m)
• Two (2) 16 AWG OFC Copper Speaker Leads
• Four (4) 20 AWG OFC Copper Illumination Leads
• Stannum-Plated for Corrosion Resistance
• Fine-Strand Construction for Optimum Flexibility

• One Pair of Long and One Pair of Short SAE Posts for SK-BT35 thru SKBT100
• Posts with M6 that has 15mm and 27.5mm Posts
• Two Sets

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• Made with heavy-gauge steel and powder coated for an indestructible finish
• Box is universal
• High quality at an affordable price
• Bottom of the boxes have predrilled flanges for permanent mounting

• Cigarette lighter adapter for SPXDBTC Bluetooth Controller
• For use with SPXD dynamic lighting
• Universal application, fits any vehicle
• Features on and off switch

• 1350 watts x 1 channel @ 4 ohm
• 2100 watts x 1 channel @ 2 ohm
• 3000 watts x 1 channel @ 1 ohm
• Total RMS Power: 3000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 3.5" Punch V2 Flush Mount Speaker Mesh Grilles
• Designed for use in select Rockford Fosgate Punch V2 speakers
• Flush mount design for a seamless appearance
• Ideal for mounting low-profile speakers with shallow grilles

• 10" Single SPL Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 1.6 cubic feet

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength fuse holder
• Stainless steel hardware
• Also works in marine applications

• 0.75" diaphragm for tweeter
• Designed for Cerwin Vega P75T tweeter
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 7.47"
• Sensitivity: 85 dB

• Sensitivity: 86.3 dB
• OverRoll™ Surround
• W-Cone
• Forced-Air-Cooled Aluminum Alloy Frame
• Radially Cross-Drilled Pole Piece
• Dual Ultra-Long Voice Coils
• Black Powder-Coating

• Pure silver conductors for full midrange & crystal clear highs
• 5-layer signal protection to keep music in and noise out
• Rhodium plated machined copper RCA ends
• Ultra OFC long grain copper conductors

• Universal Rear View Backup Camera
• HDR (High Dynamic Range) technology
• Mounting Style: Multiple Mounting Options
• Viewing Angle: 131˚ horizontal, 103˚ vertical
• Resolution: 1280 x 720  (1-3/7" CMOS image sensor)
• Waterproof: Yes (IP67 water and dust proof)

• Peak Power: 400 watts
• RMS Power: 200 watts
• Kevlar Fiber-Enforced Non-Pressed Paper cone
• EROM Foam with red stitching surround
• Impedance: Dual 4 ohm
• Mount depth: 4.37"
• Sensitivity: 85 dB

• Pair of 6.5" universal flat mount kick panel speaker pods in black
• Durable high-density and durable plastic construction
• Enclosure houses 1 6.5" coaxial speaker
• IP36 and UV rated, all elements ready
• Speakers sold by pair

• LCD 2-Way Responder Remote for Python Responder 460
• 15 Channel SHF Transmitter
• 2/66 (18 quintillion) Rolling Codes

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 1.00"
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• Peak Power: 400 watts
• RMS Power: 200 watts
• Treated Semi-Pressed Pulped Cone
• Treated Foam Surround
• Impedance: Dual 4 ohm
• Mount depth: 4.25"
• Sensitivity: 83.5 dB

• Peak Power: 500 watts
• Built-in D amplifier
• Weatherproof IPX-66 rating enclosure
• (4) 2-1/4" Mid-range speakers
• (2) 1" tweeters
• (2) 4" side-mounted woofers
• AUX input for smartphones and MP3
• Dimensions: 25.5" W x 4.5" H x 4.5" D