Universal-Fit Audio for 1989 Cadillac Eldorado

---

• 25 feet Ground Wire
• OFC (100% Oxygen-Free Copper) material
• Color: Black
• Ultra-flex marine-grade wiring

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• Peak Power: 8000 watts
• RMS Power: 4000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 24.00"
• Sensitivity: 92 dB

• 1.8" NEO Series Pro-Audio Bullet Tweeters
• 100 watts Peak Each
• RMS Each
• 4 ohm Impedance

• 39 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Sold as a pair

• 12-volt Powersports Absorbed Glass Mat (AGM) Battery
• Sealed and non-spillable Absorbed Glass Mat (AGM) design
• Fits JIS battery type BTX9-BS applications
• Factory activated ready for use
• Cranking Amps: 125 amps

• Digital Bass Reconstruction Processor
• Advanced line driver circuitry
• Dash-mount remote control
• Speaker level inputs

• 12 -Volt Car Battery
• Fits in many Domestic, Japanese and European vehicle models
• Fits on Jeep, Chrysler, Bentley, Nissan and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• 2-Way Remote Start Keyless Entry Car Alarm System
• Includes (1) 2-way LCD transmitter and (1) 1-way LED transmitter
• 1 mile (5280 feet) range
• Includes internal antenna and USB port
• Programming and command buttons

• Commercial Grade Top Mount Camera
• Features built-in microphone
• Mounting Style: Surface Mount
• Viewing Angle: 150 °
• Pixel Resolution: 975 x 582  (NTSC)
• Waterproof: Yes (IP68 rated)
• Nightvision: Infrared LED's (18 LEDs)

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• 3" Apocalypse Series Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.25"
• Sensitivity: 80.49 dB

• 10" Single Ported Subwoofer Enclosure
• Fits JL Audio W7/W7AE series subwoofers
• 1" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 1.5 cubic feet

• 1/8 inch heat shrink tubing
• Made with polyoefin (black)
• Length: 4 feet

• Pair of universal 4-button 1-way plug-in remotes
• Antenna upgrade
• 2500 ft. range

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Backup Camera Monitor
• Auto video detection, camera priority
• Monitor Screen Size: 4.3"
• Monitor Screen Type: TFT LCD

• 12 -Volt Car Battery
• Fits in many European vehicle models
• Fits on Ferrari, Lamborghini, and Saab
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• 200 watts x 2 channel @ 4 ohm
• 350 watts x 2 channel @ 2 ohm
• Bridged: 700 watts x 1 channel @ 4 ohm
• Total RMS Power: 700 watts
• Class A/B 2 ohm Stable 2-Channel Amplifier

• 8" Amplified Loaded Subwoofer System
• 150 watts RMS
• Built-In Class Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 12 -Volt Car Battery
• Fits in many German and Japanese vehicle models
• Fits on Audi, BMW, VW, Lexus, Subaru and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• 12 -Volt Car Battery
• Fits in many Domestic and Japanese vehicle models
• Fits on Nissan, Mazda, Mitsubishi, Honda, and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• 12 -Volt Car Battery
• Fits in many Domestic, Japanese and European vehicle models
• Fits on Audi, Chevrolet, Ford, GMC, Volkswagen and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations

• High-polished stainless steel tower speaker fixed clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• 12-volt Powersports Absorbed Glass Mat (AGM) Battery
• Sealed and non-spillable Absorbed Glass Mat (AGM) design
• Fits JIS battery type BTX12-BS applications
• Factory activated ready for use
• Cranking Amps: 180 amps

• Waterproof marine grade circuit breaker
• 150 Amp maximum current power
• Weatherproof construction
• Ignition protected

• Sealed truck enclosure with 1 12" Solo-Baric L7T Series Subwoofer
• 600 watts RMS power handling
• Final Impedance: 2-ohm
• Dimensions: 21.5" L x 13.75" H x 7.75" W x 4.375" W2

• Sealed truck enclosure with 1 12" Solo-Baric L7 Series Subwoofer
• 300-600 watts RMS Power Rating
• Final Impedance: 2-ohm
• Dimensions: 23 7/8" L x 6 1/2" H x 15" W

• RPM panel rocker switch Bluetooth audio controller and receiver
• Integrated Bluetooth 5.0 (A2DP, AVRCP, HFP, HID)
• Water resistant touch keypad for marine applications
• Mounts into a standard carling opening

• 10" LED acrylic ring and LED strip for Wet Sounds marine speakers
• CNC-machined high-quality acrylic rings
• SMD 5050 RGB LED strips
• Compatible with Wet Sounds REV10 and REV410 marine tower speakers (Sold separately)

• 12-Volt Car and Powersports Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Includes M6 terminal hardware
• Extremely lightweight design
• Can be mounted in the cabin or under the hood

• 12 -Volt Car Battery
• Fits in many Domestic and Japanese vehicle models
• Fits on Dodge, Chrysler, Mitsubishi, Honda, and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• HD digital color LCD < /br> • Video System: NTSC / PAL < /br> • LED backlight < /br> • Dashboard or Windshield mount < /br> • Selectable forward facing and reverse facing image

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• 1-Way 4-Button Remote Transmitters
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Command buttons
• Confirmation LED feature

• 15" square subwoofer mesh grille
• Fits for 15" Solo-Baric L7S subwoofers
• Protects against damage
• Black mesh design

• 5" RGB LED Light Whip and Flagpole
• 160 super bright 5050 RGB LEDs
• Customized lighting with 20 static colors and 9 dynamic modes
• Five different speed and brightness levels
• Remote control included

• 8" Marine Subwoofer Grille
• Black SW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• White SW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• Black XW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• White XW grille design
• REVO 8 FA marine subwoofers sold separately

• 100 feet 4 gauge Power Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Silver
• 2058 strands with flexible PVC insulation

• LCD 2-Way Responder Remote for Python Responder 460
• 15 Channel SHF Transmitter
• 2/66 (18 quintillion) Rolling Codes

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 4000 - 5500 watt car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 9.9 lbs.

• 1/2 inch
• polyoefin
• 4 feet

• Swivel mount clamp for ETXv3 tower speakers
• Designed to fit tower speakers or roll bars
• Sold as pair (2 swivel mount clamps)
• Inner clamp diameter: 1.90" (48.3mm)

• 16 Million Color Options
• 4 Programmable Triggers
• Handles Up To 10 Amps Of Lights
• Black Finish

• PRO Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant ShocKrome Finish

• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction

• Portable smart car battery charger and maintainer
• 4 x 1.5 amp output with clamp or bolt-on connection
• Supports 6 or 12 volt system
• Works on Lead-Acid, Wet, Gel, AGM, Calcium, Lithium (LiFePO4)
• Thermal, reverse, over charge, over current protection
• Charges multiple battery sizes and types

• 12" Digital LED Acrylic Ring for Marine Speakers
• Water resistant, perfect for harsh environment
• Easy installation, no major modification required
• Sealed acrylic (marine-grade) construction
• Light customizable via LC-DRM Bluetooth module

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Wire Gauge Reducer
• 0 AWG to 4 AWG
• Nickel Plated
• Deep Wire Recesses
• Ultimate Power Delivery

• High Conductivity Platinum Plating
• Maximum Current Transfer
• 200 Amp Rating
• ANL Style Fuse
• 1 Pack

• 8" Black replacement antenna mast
• Fits into the original antenna location for AM/FM stations
• Easy removable mast design
• Includes 12 adapters to fit stereo connections

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 4.291"
• Sensitivity: 81.9876 dB