Universal-Fit Audio for 1994 Audi 90

---

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Yellow LED illuminated ring

• Extension Cable
• Length: 50 feet

• 12" Single Shallow Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Shallow construction and downward firing design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.47 cubic feet

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Marine Grade Bluetooth Audio Controller/Receiver
• Designed for marine and powersports applications
• Bluetooth version 4.0
• Delivers CD-like sound quality wirelessly
• Membrane Switchpad

• Spade Terminals
• 4 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Male-female RGB solder connectors with heat sink
• Use with Stinger ENLIGHT10 and Race Sport COLORTRAIL LED Strip lights
• 8 Pack (4 male / 4 female)

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 4" Titanium Pro-Audio Bullet Horn Super Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• 1/0 gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems up to 4000 watts
• Stinger SHD201 water-resistant ANL fuse holder included

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• 1"-6"
• 3M Heat Shrink tubing < /br>

• Drive Smarter unified app and technology platform
• Autolearn Intelligence GPS, IVT filtering, and Autosensitivity
• Dual-band Wi-fi
• Defender database
• In-Vehicle Filtering Technology
• Includes High-quality 16GB memory card

• 8" LED acrylic ring and LED strip for Wet Sounds speakers
• CNC-machined high-quality acrylic rings
• SMD 5050 RGB LED strips
• Compatible with Wet Sounds 8" XS and SW marine speakers (Sold separately)

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• 8" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 1.30 cubic feet
• Compatible for Sundown SA8V2 and similar subwoofers (Sold separately)

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• Peak Power: 1350 watts
• RMS Power: 450 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 6-1/4"
• Sensitivity: 91 dB

• Ported truck enclosure with 1 10" Solo-Baric L7S Series Subwoofer
• 600 watts RMS (1200 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 21-1/2" L x 15" H x 10" W x 6-1/2" W2

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Universal square terminal cup for speaker and subwoofer boxes
• Nickel-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black

• 330 watts x 4 channel @ 4 ohm
• 500 watts x 4 channel @ 2 ohm
• Bridged: 1000 watts x 2 channel @ 4 ohm
• Total RMS Power: 2000 watts
• Class D 2 ohm Stable 4-Channel Amplifier

Single conductor wire • Length: 500ft • Flexible jacket • Gauge: 18 Gauge •

• Direct Connection to the factory harness
• Length: 5 feet
• Color coded wires for easy installation
• No cutting or splicing required

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• For OEM* & Aftermarket screens
• Turn signal camera activation timed to 12 seconds or continuous activation
• Selectable Rear View Camera Priority
• Selectable Turn Signal Cameras have priority over the rear

• 10" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals