Universal-Fit Audio for 1998 Audi A6

---

• Universal amplifier turn on/off timer
• Easy 4 wire installation
• Color coded wires

• Universal Wired Bass Remote
• Multiple mounting options
• Features stereo RCA input and output
• No additional wiring needed for installation

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• 80 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Push button reset can also be used as a kill switch
• Easily mount on firewall or other panel

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 3.5 mm to 3.5 mm Headphone Audio Splitter
• Allows for two people to listen to one audio source at once
• Length: 4.56" / 0.38 ft

• Universal Double-DIN trim rings
• For Double-DIN radio installations

• 5-pin RGBW Hardwire Pigtail Adapter
• Designed for use with RGBW-CB1 controller (Sold separately)
• Cable Length: 6 inches

• Door Lock Relay Module with Resistors DEI 451M
• Compatible with most Directed Electronics systems
• 3-Pin Plug Interface with DEI system
• Will interface with most electric power door lock systems drawing 30A or less

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• 8" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .45 cubic feet
• Premium Black Carpet with Black NVX Logo

• Modified Sine Professional Grade Power Inverter
• 2500 watts RMS, 5000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

• 420 watts x 1 channel @ 4 ohm
• 760 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Allows aftermarket actuators to work with cable door lock systems
• Each kit operates two doors
• Does not include actuators
• Includes module, wiring harness and installation guide

• Wired marine remote control without display
• Compatible with select Clarion stereos
• Easily adds up to 3 remotes
• IP67-rated water resistant design

• 3.0 Farad Digital Capacitor
• Voltage Meter
• Impact Resistant Polycarbonate Cover
• Simple Mounting System

• Digital Bass Restoration Processor
• AudioControl ACR-4 bass remote included
• Speaker and line-level (RCA) inputs
• ParaBass equalization circuitry for bass shaping

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Works with most 5 1/4", 6 1/2" and 6 3/4" speakers
• Gives 1 inch extra depth

• Brass Construction
• 4 GA to 8 GA
• Nickel Plated Finish
• Large Set Screws

• Peak Power: 1000 watts
• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 6"
• Sensitivity: 91 dB

• Single or Multi-Tone Siren
• Six Tone Siren
• 20 watt Output

• Replacement Amplified Hide-Away Antenna for AM/FM Bands
• Active Magnetic-Type Antenna
• Works on the Magnetic Field

• 12" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

• 3" Apocalypse Series Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• Spade Terminals
• 4 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Pressed Paper Cone
• Double-Stitched Surround
• Mount depth: 5.71"
• Sensitivity: 78.14 dB

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 5.625"
• Sensitivity: 83.5 dB

• Extension cable perfect when installing an FM modulated multi-disc CD changer, or other FM modulated tuner like a Satellite Radio box
• Also works with hideaway "brain" units from multimedia receivers

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• 50 feet 1/0 gauge Power Wire
• CCA (Copper-Clad Aluminum) material
• Ultra flexible CCA cable construction
• Color: Matte Blue

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

• 750W Max
• 250W RMS
• Polypropylene-Mica cone
• High-excursion poly-foam surround
• High-strength custom steel frame
• Progressive Wavelit Ribs (P.W.R.) cone design

• Dual Zone Proximity Sensor
• Dual zone sensing
• Protects both inside and outside of the vehicle
• Each zone is independently adjustable
• LED sensitivity test light
• Pre-wired 4-pin plug allows easy connection to all Omega systems

• Marine Grade Bluetooth Audio Controller/Receiver
• Designed for marine and powersports applications
• Bluetooth version 4.0
• Delivers CD-like sound quality wirelessly
• Membrane Switchpad

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Includes hardware to connect multiple ZERO 12 ENC boxes

• Aluminum diaphragm recone kit
• Designed for Kicker ST3TW bullet tweeter
• Field replaceable - no glue required.

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 14-volt Lithium Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Perfect for up to 6000-watt audio systems

• Accepts Up To 8 Gauge
• Dual Red Molded Design
• Compression Style Connection
• Expandable Quick Connection
• Shoc-Krome Plating

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• Features Qualcomm Quick Charge 3.0 - Can replace your cigarette lighter socket or add as a new one
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)
• Digital Volt Indicator display the status of your battery or your charging system

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• Pro Business 2-Way Walkie Talkies
• IP54-rated splashproof and weather-resistant
• 22 Channels and 88 Privacy Codes
• Voice-Activated Transmission (VOX)
• 18-hour lithium-ion battery

• Original StickyCup silicone suction windshield mount
• Compatible with Escort radar detectors
• Small and reliable mounting suction with strong adhesion
• Easy release tab ensures strong suction to the windshield

• Ring Terminals
• 5/16" Opening
• 0/1 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Portable Automatic Smart Lithium Standard Voltage Maintainer
• Lithium Lifepo4 Battery Maintainer 3.5 Amp
• Designed for charging 12 volts batteries
• Shuts off when the battery is charged
• Can be used as a "Maintainer" for all lifepo4 batteries

• Peak Power: 3000 watts
• RMS Power: 1500 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 8.19"
• Sensitivity: 88 dB (1W/1m)

• 8-Channel line driver with remote controller
• 4 pairs of adjustable outputs
• Remote level adjustments of Ch 5/6 and Ch 7/8
• Dual color LEDs for signal level monitoring and setup
• Sealed construction designed for marine applications

• RMS Power: 1500 watts
• Impedance: Dual 1.5 ohm
• Polypropylene Cone
• Polyester Foam Surround
• Mount depth: 10.50"
• Sensitivity: 86.3 dB

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.69 cubic feet
• Completely miter and dado end panels
• Premium carpeted finish
• Made in the USA

• Replacement Transmitter
• Four-Button Design
• One-Way Paging Remote
• LED Indicator

• Empty Dual 6.5" Speakers and Single DIN Radio Overhead Console Enclosure
• Durable ABS plastic construction and matte black finish
• Paintable for custom installation
• Water-resistant design

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 3.50 cubic feet
• Premium Black Carpet with Black NVX Logo

• 100 watts x 4 channel + 315 watts x 1 channel @ 4 ohm
• 150 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier