Universal-Fit Audio for 2001 Dodge Caravan

---

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 5/6-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• True Spec 12 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Translucent EnvyFlex flexible multi-strand construction

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• 60 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Works in select 2018-up Chrysler-built vehicles
• Sold as a pair

• Ultrasonic Sensor for Security Systems
• Detects air pressure changes in the cabin of the vehicle
• Detect thieves entering vehicle without glass breakage
• Adds extra protection when used in conjunction with other security systems

• Video cable extension
• Designed for STZ-RF200WD

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• High Conductivity Platinum Plating
• Maximum Current Transfer
• 200 Amp Rating
• ANL Style Fuse
• 1 Pack

• 200 watts x 2 channel @ 4 ohm
• 300 watts x 2 channel @ 2 ohm
• Bridged: 600 watts x 1 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• Peak Power: 1050 watts
• RMS Power: 350 watts
• Impedance: Dual 2 or 4 ohm
• Aluminum Cone
• Hi-Roll Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 81 dB

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• 3.5mm Auxiliary Audio Cable
• Compatible with any device with a 3.5mm auxiliary input or output
• Female to female extension adapter included

• Universal square terminal cup for speaker and subwoofer boxes
• Nickel-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 4000 - 5500 watt car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 9.9 lbs.

• 11" Amplified Loaded Subwoofer System
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• Maxi Fuse
• Power Rating: 80 Amps
• Platinum-Plated Contacts
• Ultimate Circuit Protection
• High Conductivity Plating
• Maximum Current Transfer
• Designed to Fit Maxi Fuse Holders

• Butt Connectors
• 22/18 Gauge
• Color: Red
• Vinyl Insulated
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• High-power White Rock Light Crawler Kit (8-piece Set)
• Seven impressive fade and strobe patterns
• Flexible mounting options and straightforward wiring
• Lumen measurement: 14000 lm
• IP67 waterproof rating

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 12" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW124, NSW122v3, NSW124v3, VSW122v3, VSW124v3, SMW12D4)
• Works with Most Other 12" Subwoofers
• High Quality Construction

• 6" 4-pin RGBW hardwire pigtail adapter
• Designed for use with Metra RGB-CB2 (Sold separately)

• Bulk Pack of T-Tap Connector
• For 12/10 Gauge (AWG) Wire
• Yellow
• Package of 50

• Quick Disconnect
• Up to 4 Gauge Power Wire
• Polarity Identification for Safety

• LED Lighting System
• (6) 1-Watt LEDs
• ECE R10 Certified
• Available in white or amber
• Water-resistant IP65 rating
• 16 self-controlled patterns

• 1200 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 500 ft. (152.40m) 8 Gauge V12 Series Full OFC True Spec Power Wire
• Exceeds CEA and ANSI Specification for Wire Gauge
• Full Virgin OFC Copper Construction
• Ultra-flexible PVC Blended Jacket
• Color: Matte Silver

• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage

• Accepts 1/0 or 4-Gauge Power Wire
• ANL Fuse Holder
• Anodized Finish

• 39 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Sold as a pair

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast