Universal-Fit Audio for 2002 Suzuki Vitara

---

• 8" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .75 cubic feet
• Premium Black Carpet with Black NVX Logo

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• 1.8" NEO Series Pro-Audio Bullet Tweeters
• 100 watts Peak Each
• RMS Each
• 4 ohm Impedance

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Paper cone
• Foam surround
• Sensitivity: 87.4 dB

• Media Master Remote controller cable
• 6-foot Extension Cable

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• 12-volt Absorbent Glass Mat (AGM) Secondary Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 750W car audio stereo systems
• Compatible with most vehicle applications

• SAE Top Post Battery Terminals
• Pair of positive or negative battery clamps
• Top-mounted or side-mounted options
• Machined brass construction with satin chrome finish

8" Grille made specifically for the JL Audio 8W1v2, 8W1v3, 8W3v3 Sub • Provides the Best Protection Possible • Top-Notch JL Audio Quality • Metal Mesh Grille Painted Black

• Double-DIN Dash Kit
• Painted scratch-resistant matte black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• 670 watts x 1 channel @ 4 ohm
• 1100 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 7000 watts
• RMS Power: 3500 watts
• Impedance: Dual 1 ohm
• Treated Paper Cone
• Treated Foam Surround
• Sensitivity: 91.58 dB

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Mounting clamp for Stealth soundbars with 1.75" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 8 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Peak Power: 8000 watts
• RMS Power: 4000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 24.00"
• Sensitivity: 92 dB

•10" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Slider mounting bracket for Stealth HD and XT soundbars
• CNC'd from billet aluminum for extra durability
• Allows adjusting of soundbar mounting width
• Includes brackets, bolts, lock-washers, and flat-washers (2 each)

• NMEA 2000-certified remote/repeater
• 2.6” monochrome LCD screen
• IPx7 waterproof rating
• Multi‐Zone technology
• Plug-and-play setup

• 10" Subwoofer Mesh Grille Insert for W6v2 and W6v3 Subwoofers
• Powder-coated steel mesh grille in satin black finish
• Protects subwoofers against potential damage

• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations

• 1/0 Gauge Dual Amplifier Power Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• Two brass and satin chrome distribution blocks
• CEA-2015 and BC5W2 Compliant

• Dual 12" 12W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• Extension cable perfect when installing an FM modulated multi-disc CD changer, or other FM modulated tuner like a Satellite Radio box
• Also works with hideaway "brain" units from multimedia receivers

• Weatherproof Bluetooth Marine Receiver
• For use with hideaway remote audio receiver or dash-mount controller
• Connects with up to 35 ft (11 meters) of wireless range
• IPX8 marine-grade rating

• 1-Way Remote Car Starter
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Internal antenna
• Active transmit LED
• Command buttons

• 10,000W Peak
• 5,000W RMS
• Poly-ether Wide Edge Surround
• Triangular Lattice Design
• Spider Ring Design for Increased Linear Spider Position
• PSP Terminal for Easy and Quick Wiring
• Aluminum Bobbin Voice Coil

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• 6.5" universal shallow mesh speaker grill
• Fits speakers and midranges
• Bolt-on easy installation
• Slim and shallow design
• Painted in matte black
• Sold individually/per piece

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• 15" SoloX Series Dual 2-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 2-ohm
• Alignment shims are included for installation

• Direct wire power cord
• Designed for laser and Radar detectors
• Prevents interference with driving functions
• Compatible with Passport 8500, 9500iX, Solo S3 and S4 Models
• Installs in vehicle fuse panel

• Works with Most 5-1/4" Speakers
• Factory Style Finishes
• Heavy Duty ABS Plastic
• Works with 6" to 6.5" Speakers

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• 12-volt to 5-volt Step-Down Interface
• Fixes audible 'pop' when aftermarket stereo turns on factory amplifier
• Designed for use in Ford, Lincoln, and Mercury vehicles

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.375 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 Speaker Models

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Quick Disconnect Clamps
• For Marine Use
• Designed to Fit Towers or Roll Bars with Widths 1-1/5" to 2"
• 360° Rotation
• Black

• 2-channel RCA ground loop isolator
• Easily eliminates unwanted ground loop noise
• No need for additional adapters
• Universal vehicle application

• HPM Series 1/0 or 4ga Outputs with Digital Volt Meter
• Two (2) 1/0 Gauge or (2) 4 Gauge Output
• Monitor system voltage
• Ultimate power connection
• Multiple output design
• Positive terminals only

• BT4 Pos/Neg Battery Terminal. (2) 1/0-8AWG, (1) 4-8AWG
• (2) 1/0-4 Gauge out
• 4-8 Gauge out
• Brass construction

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 84.87 dB

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• 2-Way Walkie Talkies with LED Flashlight
• IPX4-rated splashproof and weather-resistant
• 22 Channels and 121 Privacy Codes
• 24/7 access to NOAA weather alerts
• Voice-Activated Transmission (VOX)
• Patented VibrAlert for incoming transmissions
• Built-In LED Flashlight

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 25

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier