Universal-Fit Audio for 2007 Audi A4 Quattro

---

• Dual 8-gauge input and output to 8-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• 6-Position High-Power Battery Terminal
• Positive and negative polarity
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• 10" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.20 cubic feet
• Premium Black Carpet with Black NVX Logo

• Direct Connection to the factory harness
• Length: 5 feet
• Color coded wires for easy installation
• No cutting or splicing required

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• iPhone, Android & Bluetooth Device Ready
• One Knob Controls it all - Track, Pause & Volume
• Flush in Dash or Under Dash Mounting options
• Add-on to any Radio or Device with AUX input

• Waterproof Hideaway Bluetooth Audio Receiver
• Bluetooth 5.0 technology
• Designed for marine and powersports vehicles

• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Universal Underdash CD Housing
• Premium underdash housing fully encloses the unit
• Quick conversion from 2-Shaft to DIN
• High-grade ABS Plastic

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• Peak Power: 400 watts
• RMS Power: 200 watts
• Kevlar Fiber-Enforced Non-Pressed Paper cone
• EROM Foam with red stitching surround
• Impedance: Dual 4 ohm
• Mount depth: 4.37"
• Sensitivity: 85 dB

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Mount depth: 6.66"
• Sensitivity: 85 dB

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• Ported truck enclosure with 1 10" Solo-Baric L7S Series Subwoofer
• 600 watts RMS (1200 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 21-1/2" L x 15" H x 10" W x 6-1/2" W2

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.00 cubic feet
• Premium Black Carpet with Black NVX Logo

• Wired Bass Remote Controller
• Compatible with select AudioControl processors
• Dash-mountable or center-console installation
• Color: Black

• 10" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW104, NSW102v3, NSW104v3, VSW102v3, VSW104v3, SMW10D4)
• Works with Most Other 10" Subwoofers
• High Quality Construction

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Dual Side View Blind Spot Camera Kit
• Compatible with 2007-2018 Jeep Wrangler JK (2-Door and 4-Door models)
• Mounting Style: Bracket Mount
• Viewing Angle: 80 degrees
• Resolution: 648 x 488 (CVBS) / 1280 x 720 (AHD)
• Waterproof: IP67
• Nightvision: Low-light at 0.1 lux

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 6.5" Pro-Audio Horn Tweeter and 2.03" Compression Driver
• 640 watts Peak Each
• 320 watts RMS Each
• 8 ohm Impedance

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 2000 - 2500 watts car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 4.10 lbs.

• 0.75" Replacement Diaphragm for MO75T2 Tweeter
• Specifically designed for MO75T2 (MO75TRK)
• Direct-fit design allows hassle-free installation
• Impedance: 2-ohm

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in Black

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• Cable Length: 5 Ft. (1.5m)
• Voltage: 10-16V DC
• Draw: 20mA
• Compatible With Bluetooth A2DP V3.0
• Operating Range: 33 ft.
• Waterproof Rating: IP65
• Dimensions: 2-5/16"W x 1-11/16"D x 9/16"H

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 80.6 dB

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• All-Weather Bluetooth Receiver and Controller
• Bluetooth 5.1 support
• IPX6 water-resistant rating
• AptX HD support for 24 Bit / 48 kHz audio streaming
• Three-zone controller with LED illumination

• 1" titanium replacement diaphragm for NVX VPRO35TW tweeters
• Restores clear, high-frequency sound
• Replaces damaged or worn components
• Quick and easy installation

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Spade Terminals
• 10 Gauge • 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• High Density Universal A Pillar Pod for 2.5" Tweeters
• Durable high-density and durable plastic construction
• Enclosure houses 2 2.5" dome tweeters
• UV protected and all elements ready

• 8" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .75 cubic feet
• Premium Black Carpet with Black NVX Logo

• Marine Y-Adaptor Cable
• Compatible extension cable for PMX-1R and PMX-0R

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution