Universal-Fit Audio for 2008 Kia Rio

---

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 5/6-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• Pressed Paper Cone
• Pressed Foam Surround
• Mount depth: 4.98"
• Sensitivity: 82.4 dB

• Digital 10 Farad Capacitor
• Bright Red LED Voltage Display
• Monitor System Voltage
• 12-16 Volt Operation / 18 Volt Surge
• Louder And Cleaner Bass Response

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Mini ANL Fuse
• 40 Amp Rating
• Designed for Optimal Signal Transfer
• Package Includes 2 Fuses

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• JL Audio Tower Speaker Swivel Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers
• 334 Degrees of Total Swivel Capability

• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• Manual Window Crank Retainer Clips
• Pack of 10

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 2-Channel 8000 Series RCA Interconnect Cable
• 3 ft. Cable Length
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• Molded Strain Reliefs

• 15" Subwoofer Grille for Rockford Fosgate P2 and P3 models
• Black Gloss Finish
• Mesh Design for Maximum Protection

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Two window Kit
• Intelligent safety sensor

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• Retain Factory Steering Wheel Controls with Aftermarket Stereo
• Compatible with More than 1700 Vehicles
• Works with Most Aftermarket Stereo Brands
• Assign Each Control a Secondary Function
• Program it Yourself with a Windows Based Computer

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Pro Business 2-Way Walkie Talkies
• IP54-rated splashproof and weather-resistant
• 22 Channels and 88 Privacy Codes
• Voice-Activated Transmission (VOX)
• 18-hour lithium-ion battery

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 10" RGB LED Subwoofer Light Ring
• IPX7 marine grade rating
• Provides RGB illumination of the whole woofer cone area
• Includes two frames with 15 LEDs each
• Designed for Pioneer TS-ME100WC and Pioneer TS-ME100WS (Sold separately)

• Accessory Power Module
• Designed for vehicles that do not provide accessory (switched) power
• Provides 12-volt DC output when voltage is at or above 13.5-volts

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Replacement tweeter diaphragm for premium gauge tweeters
• Specifically designed for HD14.FTD tweeters
• Direct replacement, easy installation
• Includes one (1) replacement tweeter diaphragm

• 1” Aluminum Pro Audio Horn Tweeter
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• Universal 20" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes rear/side brackets and mounting hardware

• Universal 40" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• Two 8" VCW84v3 VC-Series v3 1300W RMS Subwoofers
• 2400W Peak (1200W RMS) Class D NDA12001 Monoblock Amplifier
• XKIT42 Complete 4 AWG Amplifier Wiring Kit
• 1-year Warranty from the Original Purchase Date

• Ultrasonic Sensor for Security Systems
• Detects air pressure changes in the cabin of the vehicle
• Detect thieves entering vehicle without glass breakage
• Adds extra protection when used in conjunction with other security systems

• Top mount adapters brackets for MasterCraft towers
• Works with ICON8X, REV8X, REV10X
• Also works with ICON8XM, REV8SXM, and REV10SXM via removable flat base mounts
• Includes (2) disc adapters and mounting screws

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance
• H5202 LED Single Beam
• As cool or even cooler than the traditional LED bulbs

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.0 dB