Universal-Fit Audio for 2010 Ford Taurus

---

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3 cubic feet
• Compatible for Sundown SA 15V2 subwoofers (Sold separately)

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block

• Add-On Extension Port for 10" Loaded Subwoofer Enclosure
• Use in conjunction with Stinger TXTRB10
• 6dB add-on extension port module
• With sound dampening properties

• Powersports Bluetooth Audio Receiver and Controller
• Easily pairs with any Bluetooth audio device
• Compact IP66 water-resistant design
• Compatible with UTV dash double-switch knockouts
• Stereo RCA line-out, remote turn-on, and subwoofer-level adjustments

• 8" Marine Subwoofer Grille
• White SW grille design
• REVO 8 FA marine subwoofers sold separately

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 670 watts x 1 channel @ 4 ohm
• 1100 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• For Systems Up To 1200 Watts
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• Split Loom Tubing
• Diameter: 1/8"
• Length: 100 Ft
• Material Type: Polyethylene
• Exterior Finish: Smooth
• Color: Black

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• Pair of universal 4-button 1-way plug-in remotes
• Antenna upgrade
• 2500 ft. range

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage

• 600 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 84.87 dB

• 10" Subwoofer Mesh Grille Insert for W6v2 and W6v3 Subwoofers
• Powder-coated steel mesh grille in satin black finish
• Protects subwoofers against potential damage

• Quick Disconnect Clamps
• For Marine Use
• Designed to Fit Towers or Roll Bars with Widths 1-1/5" to 2"
• 360° Rotation
• Black

• Polaris Ride Command Audio Adapter
• Compatible with select Polaris RZR, Ranger and General models
• Retains the factory Ride Command as source unit
• Utilizes built-in crossovers from Ride Command
• Harness plugs in to any amp (AMP-1, AMP-2, AMP-3) with RCA inputs

•10" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Pair of 8" universal flat mount kick panel speaker pods in black
• Durable high-density and durable plastic construction
• Enclosure houses 1 8" coaxial speaker
• IP36 and UV rated, all elements ready
• Speakers sold by pair

• 1/0 Gauge Dual Amplifier Power Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• Two brass and satin chrome distribution blocks
• CEA-2015 and BC5W2 Compliant

• Wired RGB lighting remote controller
• Designed for Alpine SPV-65RGB-CAN speakers
• 10 static colors and 4 dynamic modes
• Features memory hold function
• Made to fit UTV switch panel

• Ported enclosure with 1 12" Solo-Baric L7S Series Subwoofer
• 750 watts RMS (1500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/4" L x 16" H x 14-3/4" W x 17-7/8" W2

• Full Frame License Plate Frame Camera Bracket
• Works exclusively with CAM-300 and CAM-400
• High shine chrome metal finish
• Hidden wiring for easy installation

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• NMEA 2000-certified remote/repeater
• 2.6” monochrome LCD screen
• IPx7 waterproof rating
• Multi‐Zone technology
• Plug-and-play setup

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• Ring Terminals
• 5/16" Opening
• 0/1 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Portable smart car battery charger and maintainer
• 4 x 1.5 amp output with clamp or bolt-on connection
• Supports 6 or 12 volt system
• Works on Lead-Acid, Wet, Gel, AGM, Calcium, Lithium (LiFePO4)
• Thermal, reverse, over charge, over current protection
• Charges multiple battery sizes and types

• Direct wire power cord
• Designed for laser and Radar detectors
• Prevents interference with driving functions
• Compatible with Passport 8500, 9500iX, Solo S3 and S4 Models
• Installs in vehicle fuse panel

• 2-channel RCA ground loop isolator
• Easily eliminates unwanted ground loop noise
• No need for additional adapters
• Universal vehicle application

• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps

• 1/8 inch heat shrink tubing
• Made with polyoefin (black)
• Length: 4 feet

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• 4" Titanium Pro-Audio Bullet Horn Super Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• Universal Antenna Extender • Extends Antenna 24" (2 ft.)

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Peak Power: 8000 watts
• RMS Power: 4000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 24.00"
• Sensitivity: 92 dB

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• 1.8" NEO Series Pro-Audio Bullet Tweeters
• 100 watts Peak Each
• RMS Each
• 4 ohm Impedance

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• Digital LED lights Bluetooth controller
• IOS and Android Compatible via DS18 LC App
• Bluetooth supports 100 ft. range
• IP66 marine rated; withstands harsh environment

• 2-Way Walkie Talkies with LED Flashlight
• IPX4-rated splashproof and weather-resistant
• 22 Channels and 121 Privacy Codes
• 24/7 access to NOAA weather alerts
• Voice-Activated Transmission (VOX)
• Patented VibrAlert for incoming transmissions
• Built-In LED Flashlight

• LCD 2-Way Responder Remote for Python Responder 460
• 15 Channel SHF Transmitter
• 2/66 (18 quintillion) Rolling Codes

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• Waterproof 3.5 mm Flush mount Aux Input
• Extend Existing AUX Input to a Remote Location
• Durable Rubber Cover
• Waterproof for Marine Applications
• For Audio Only

• Transceiver Antenna
• Cable Included