Universal-Fit Audio for 2014 Dodge Durango

---

• Mounting clamp for Stealth soundbars with 1.75" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• Antenna Adapter for Vehicles with Two Antennas
• 1 Male to 2 Female

• 12" Dual Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.69 cubic feet

• Universal square terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 2-Way 5-Button Remote Start and Car Alarm LED Transmitters
• Includes (1) 2-way LED transmitter and (1) 1-way transmitter
• 1 mile range
• Compatible with Viper DS4 and DS4P security systems

• 12" Dual Medium Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 2.36 cubic feet

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• 20" Universal arrow-style replica antenna mast
• Made with durable fiberglass construction
• Includes 9 adapters and 2 rubber washers
• Simple screw-on installation, requires no vehicle modification
• Antenna mast color/design: Mossy Oak

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• 10" Single Truck Large Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.51 cubic feet

• Material: 0.75" MDF
• Inner Diameter: 5.85"
• Outer Diameter: 7.5"

• High Conductivity Platinum Plating
• Maximum Current Transfer
• 200 Amp Rating
• ANL Style Fuse
• 1 Pack

• 2-Channel 6000 Series RCA Interconnect Cable
• 3 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Blue Protective Jacket
• Mylar Shielding
• Split-Tip Connector
• Molded Strain Reliefs

• 300 watts x 2 channel @ 4 ohm
• 420 watts x 2 channel @ 2 ohm
• Bridged: 840 watts x 1 channel @ 4 ohm
• Total RMS Power: 840 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• Works with your JL Audio LED speakers
• Control lighting colors and the intensity of your lighting
• Compact system can be installed in almost any application
• Built-in over-current and short-circuit protection
• Built-in voltage and temperature monitoring

• Peak Power: 1350 watts
• RMS Power: 450 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 6-1/4"
• Sensitivity: 91 dB

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2000W car audio stereo systems
• Compatible with most vehicle applications

• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet

• Battery Isolator and Relay
• 500 Amp
• Prevents Primary Battery Discharge
• Maximizes the Current Transfer
• Extends Battery Life
• Universal 12V Applications

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• 8-Channel Digital Signal Processor
• Designed to integrate with aftermarket or factory OEM systems
• Integrated LCD display and intuitive interface
• Includes 2 audio inputs and 8 independent outputs
• 15-graphic equalizer with separate parametric equalizers

• 15" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.10 cubic feet
• Premium Black Carpet with Black NVX Logo

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• Universal Underdash CD Housing
• Premium underdash housing fully encloses the unit
• Quick conversion from 2-Shaft to DIN
• High-grade ABS Plastic

• Universal round terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 12-volt to 5-volt Step-Down Interface
• Fixes audible 'pop' when aftermarket stereo turns on factory amplifier
• Designed for use in Ford, Lincoln, and Mercury vehicles

• 12" Single Shallow Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Shallow construction and downward firing design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.47 cubic feet

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• IR Remote Controller for multimedia receivers
• Mode switch: AUD mode/DVD mode/TV mode
• Includes 2 AAA batteries

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 80.6 dB

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• USB/AUX input
• 6-foot cable
• front-mounted USB-A port and 3.5mm aux input
• 1" mounting hole required
•Easy screw in style installation

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• Dual 8-gauge input and output to 8-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.875"
• Color: Black

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.5 cubic feet
• High-output XXL enclosure with double flush baffle

• 6.5" Speaker grilles for Infinity REF607F
• Black steel mesh grille design
• Includes plastic trim rings and Infinity logo on grilles
• Will be shipped in a brown box

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2500W car audio stereo systems
• Compatible with most vehicle applications

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Features Qualcomm Quick Charge 3.0 - Can replace your cigarette lighter socket or add as a new one
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)
• Digital Volt Indicator display the status of your battery or your charging system

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• Split Loom Tubing
• Diameter: 1/8"
• Length: 100 Ft
• Material Type: Polyethylene
• Exterior Finish: Smooth
• Color: Black

• 4 Gauge 6000 Series Complete Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1750 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• Manual Window Crank Retainer Clips
• Pack of 10

• Ported enclosure with 1 12" Solo-Baric L7S Series Subwoofer
• 750 watts RMS (1500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/4" L x 16" H x 14-3/4" W x 17-7/8" W2

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black

• 12" Amplified Loaded Subwoofer System
• 1000 watts RMS
• Includes one MTX Audio TN500.1 amplifier
• Variable bass boost
• Mono preamp output
• EBC wired bass level remote control

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB