Universal-Fit Audio for 2015 Can-Am Commander E XT

---

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Replacement tweeter diaphragm for premium gauge tweeters
• Specifically designed for HD14.FTD tweeters
• Direct replacement, easy installation
• Includes one (1) replacement tweeter diaphragm

• 1” Aluminum Pro Audio Horn Tweeter
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• Universal 20" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes rear/side brackets and mounting hardware

• Universal 40" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• Two 8" VCW84v3 VC-Series v3 1300W RMS Subwoofers
• 2400W Peak (1200W RMS) Class D NDA12001 Monoblock Amplifier
• XKIT42 Complete 4 AWG Amplifier Wiring Kit
• 1-year Warranty from the Original Purchase Date

• Ultrasonic Sensor for Security Systems
• Detects air pressure changes in the cabin of the vehicle
• Detect thieves entering vehicle without glass breakage
• Adds extra protection when used in conjunction with other security systems

• Top mount adapters brackets for MasterCraft towers
• Works with ICON8X, REV8X, REV10X
• Also works with ICON8XM, REV8SXM, and REV10SXM via removable flat base mounts
• Includes (2) disc adapters and mounting screws

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance
• H5202 LED Single Beam
• As cool or even cooler than the traditional LED bulbs

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.0 dB

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 80 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Push button reset can also be used as a kill switch
• Easily mount on firewall or other panel

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.75 cubic feet
• Premium Black Carpet with Black NVX Logo

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 4000 - 5500 watt car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 9.9 lbs.

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Protect your battery from heat and keep it in position
• Constructed from heavy gauge steel
• Has holed flanges at the bottom for permanent mounting.

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 50 Watts x 4 + 200 Watts x 1 @ 4 ohm
• 100 Watts x 4 + 350 Watts x 1 @ 2 ohm
• 200 Watts x 2 + N/A @ 4 ohm Bridged/Mono
• 5-Channel Amplifer
• Element Ready™ design protects against outdoor exposure
• Top Mounted Control Panel

• 1/2 inch
• polyoefin
• 4 feet

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes rear/side brackets and mounting hardware hebd8

• Kicker HS10 180W RMS Single Loaded 10-Inch Hideaway Series Powered Subwoofer Enclosure
• Convenient wired remote for independent bass level control
• 8 Gauge Premium CCA complete 2-channel amplifier wiring kit with RCA
• Premium polyurethane foam can insulator sleeve koozie with black logo
• Complete bass solution includes compact powered subwoofer and installation hardware

• Butt Connectors
• 22/18 Gauge
• Color: Red
• Vinyl Insulated
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires

• Peak Power: 1050 watts
• RMS Power: 350 watts
• Impedance: Dual 2 or 4 ohm
• Aluminum Cone
• Hi-Roll Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 81 dB

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 2000 - 2500 watts car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 4.10 lbs.

• 6" 4-pin RGBW hardwire pigtail adapter
• Designed for use with Metra RGB-CB2 (Sold separately)

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• 3.5mm Auxiliary Audio Cable
• Compatible with any device with a 3.5mm auxiliary input or output
• Female to female extension adapter included

• Encore WK-4 Four Window Roll-up Kit
• Universal for vehicles with Alarm/Remote Start Systems
• Rolls up windows one at a time or all together when arming your vehicle's alarm or remote start
• Intelligent safety sensor
• Positive and Negative Triggers

• 25 ft. 12 Gauge Premium Series Speaker Cable
• Multi-speaker cable for long runs up to 4 Channels
• Ninth conductor can be used for remote turn-on connection
• OFC Copper for flexibility and conductivity

• LED Lighting System
• (6) 1-Watt LEDs
• ECE R10 Certified
• Available in white or amber
• Water-resistant IP65 rating
• 16 self-controlled patterns

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• 39 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Sold as a pair

• High-power White Rock Light Crawler Kit (8-piece Set)
• Seven impressive fade and strobe patterns
• Flexible mounting options and straightforward wiring
• Lumen measurement: 14000 lm
• IP67 waterproof rating

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• Bulk Pack of T-Tap Connector
• For 12/10 Gauge (AWG) Wire
• Yellow
• Package of 50

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.375" (60.3 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• IPX7 rated Deutsch™ / Amphenol™ Element Ready™ connectors
• Controller illuminates up to 8 Color Optix™ speakers and/or subwoofers

• Polaris Ride Command Audio Adapter
• Compatible with select Polaris RZR, Ranger and General models
• Retains the factory Ride Command as source unit
• Utilizes built-in crossovers from Ride Command
• Harness plugs in to any amp (AMP-1, AMP-2, AMP-3) with RCA inputs

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• Video cable extension
• Designed for STZ-RF200WD

• Vented Dual 12" Speaker Enclosure
• 1/2" Medium Density Fiberboard (MDF) construction with black carpet finish
• 12 feet Speakon cable with 14-gauge OFC wire included
• Total box volume: 1.89 cubic feet

• 500 ft. (152.40m) 8 Gauge V12 Series Full OFC True Spec Power Wire
• Exceeds CEA and ANSI Specification for Wire Gauge
• Full Virgin OFC Copper Construction
• Ultra-flexible PVC Blended Jacket
• Color: Matte Silver

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• Universal mini piezoelectric siren
• Loud warning sound
• Compact and discreet sizing
• Easy 2-wire connection
• Impact-resistant housing
• Universal compatibility
• Sold individually

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in Black

• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• 0.75" Replacement Diaphragm for MO75T2 Tweeter
• Specifically designed for MO75T2 (MO75TRK)
• Direct-fit design allows hassle-free installation
• Impedance: 2-ohm