Universal-Fit Audio for 2015 Mazda 3

---

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• 10" Single Truck Large Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.51 cubic feet

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 16mm (5/8") mounting hole size
• Red LED illuminated ring

• 4" Titanium Pro-Audio Bullet Horn Super Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• 2-Channel Speaker Wire to RCA Adaptor for High-Level Signal Connection to Amplifiers
• Left and Right Channel Male RCA Plugs to Parallel Speaker Cable
• Satin Black Jacket

• Ported enclosure with 1 12" Solo-Baric L7S Series Subwoofer
• 750 watts RMS (1500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/4" L x 16" H x 14-3/4" W x 17-7/8" W2

• PMX-ANT AM/FM/WB Amplified 12V Antenna
• Universal AM/FM/WB Antenna
• Omnidirectional
• Quick Power Connect for Easy Installation

• 1/2 inch
• polyoefin
• 4 feet

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2500W car audio stereo systems
• Compatible with most vehicle applications

• Universal Fender Mount Side View Camera
• Mounting Style: Fender Mount
• Resolution: 976 x 496 (600TV lines)
• Camera Housing Color: Black

• Battery Isolator and Relay
• 500 Amp
• Prevents Primary Battery Discharge
• Maximizes the Current Transfer
• Extends Battery Life
• Universal 12V Applications

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• Antenna Adapter for Vehicles with Two Antennas
• 1 Male to 2 Female

• Wired Bass Remote Controller
• Compatible with select AudioControl processors
• Dash-mountable or center-console installation
• Color: Black

• Rear View Mirror with Backup Camera Monitor
• Built-in auto-dimming, temperature, and compass display
• Monitor Screen Size: 4.3"
• Monitor Screen Type: TFT LCD

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference

• Universal square terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• Modified Sine Professional Grade Power Inverter
• 2500 watts RMS, 5000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB

Single conductor wire • Length: 500ft • Flexible jacket • Gauge: 18 Gauge •

• Digital 10 Farad Capacitor
• Bright Red LED Voltage Display
• Monitor System Voltage
• 12-16 Volt Operation / 18 Volt Surge
• Louder And Cleaner Bass Response

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 12" Amplified Loaded Spare Tire Subwoofer System
• 150 watts RMS
• Includes Class D Amplifier
• Compact and shallow design
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in White

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• Peak Power: 200 watts
• Built-in amplifier
• Weatherproof Rating
• (6) 3" Full-range speakers
• (2) 1" Tweeters
• USB playback and charging
• AUX input for smartphones and MP3
• Dimensions: 4-5/16" W x 3-7/16" H x D

• Extension Cable
• Length: 50 feet

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 10" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

• 12-volt Absorbent Glass Mat (AGM) Car Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 3000W audio stereo systems
• Compatible with many Domestic and Japanese vehicles

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• 8-Channel Digital Signal Processor
• Designed to integrate with aftermarket or factory OEM systems
• Integrated LCD display and intuitive interface
• Includes 2 audio inputs and 8 independent outputs
• 15-graphic equalizer with separate parametric equalizers

• Universal Bluetooth Receiver and Remote Control
• Replaces head unit and works with most aftermarket audio systems
• Provides wireless power, volume and tracking commands
• Surface mount, flush mount, and clamp mounting options

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• 200-Amp continuous / 300-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16V DC operating range

• Mini ANL Fuse
• 40 Amp Rating
• Designed for Optimal Signal Transfer
• Package Includes 2 Fuses

• Marine Grade Bluetooth Audio Controller/Receiver
• Designed for marine and powersports applications
• Bluetooth version 4.0
• Delivers CD-like sound quality wirelessly
• Membrane Switchpad

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• 25 ft. 12 Gauge Premium Series Speaker Cable
• Multi-speaker cable for long runs up to 4 Channels
• Ninth conductor can be used for remote turn-on connection
• OFC Copper for flexibility and conductivity

• Switchable Positive or Negative Trigger
• Slim and Compact Design
• Plug and Play Connection

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets

• For OEM* & Aftermarket screens
• Turn signal camera activation timed to 12 seconds or continuous activation
• Selectable Rear View Camera Priority
• Selectable Turn Signal Cameras have priority over the rear