Universal-Fit Audio for 2018 BMW M6

---

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• 600 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 3 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• 39 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Sold as a pair

• Replacement USB to Lightning cable for compatible iOs devices
• Supports charging and data transfer
• Length: 3 ft. (36")

• 1 Pair (1 negative, 1 positive) of. Side-Post to Top-Mount Battery Terminal Adapters
• Forged and machined brass construction
• Marine-grade, anti-corrosive Stannum plating

• 8 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.500"
• Color: Black

• Pair of 2-Way Universal Pod for 6.5" loudspeaker and 1.5" tweeter
• Enclosure comes in 1 set (left and right)
• Injected high density ABS plastic construction
• UV protected and all-element ready

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

•10" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations

• Dual 12" 12W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 25

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.6 dB

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 84.87 dB

• 12" Dual Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.69 cubic feet

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 6-Spot Universal Lug-Style Ring Battery Terminals
• Designed for large-gauge power and ground connections
• Aluminum-plated build that resists corrosion
• Compatible with car, motorcycle and powersports applications
• Sold as pair

• Peak Power: 1350 watts
• RMS Power: 450 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 6-1/4"
• Sensitivity: 91 dB

• NMEA 2000-certified remote/repeater
• 2.6” monochrome LCD screen
• IPx7 waterproof rating
• Multi‐Zone technology
• Plug-and-play setup

• Allows aftermarket actuators to work with cable door lock systems
• Each kit operates two doors
• Does not include actuators
• Includes module, wiring harness and installation guide

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet

• Video switch with trigger wires
• 4 camera input and 1 video output
• 4 trigger wires for each camera

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in White

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• IR Remote Controller for multimedia receivers
• Mode switch: AUD mode/DVD mode/TV mode
• Includes 2 AAA batteries

• Dual USB Replacement Panel
• Replace the existing USB panel when installing a new car stereo
• Includes two 26" cables
• Compatible with 2017-up vehicles from Ford

• 8-Channel line driver with remote controller
• 4 pairs of adjustable outputs
• Remote level adjustments of Ch 5/6 and Ch 7/8
• Dual color LEDs for signal level monitoring and setup
• Sealed construction designed for marine applications

• 2-channel RCA ground loop isolator
• Easily eliminates unwanted ground loop noise
• No need for additional adapters
• Universal vehicle application

• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• USB / HDMI / Auxiliary Replacement Panel
• Replaces the factory USB and auxiliary panel
• Compatible with 2011-2020 Hyundai, Kia

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.375 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 Speaker Models

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference