Universal-Fit Audio for 2026 Jeep Gladiator

---

• Life Expectancy: 50,000 hours
• 12-Watts
• IP67 rating
• Cool White (Color Temperature)
• Beam Pattern: Linear

• 520 watts x 2 channel @ 4 ohm
• 750 watts x 2 channel @ 2 ohm
• Bridged: 1500 watts x 1 channel @ 4 ohm
• Total RMS Power: 1500 watts
• Class D 2 ohm Stable 2-Channel-Channel Amplifier

• 12" Dual Ported Subwoofer Enclosure
• Durable Strong Birch Plywood construction
• Designed for 12-Inch SoloX L7X subwoofers

• 240 watts x 2 channel @ 4 ohm
• 350 watts x 2 channel @ 2 ohm
• Bridged: 700 watts x 1 channel @ 4 ohm
• Total RMS Power: 700 watts
• Class D 2 ohm Stable 2-Channel-Channel Amplifier

• 8" Amplified Loaded Subwoofer System
• 500 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs via RCA
• Wired Remote Bass Level Control

• 10" Single Shallow Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Shallow construction and downward firing design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.47 cubic feet

• 2-Channel 8000 Series RCA Interconnect Cable
• 17 ft. Cable Length
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• Molded Strain Reliefs

• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it

• 100 feet 4 gauge Power Wire
• OFC (100% Oxygen-Free Copper) material
• Color: Blue
• Super flex translucent jacket

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Handlebar Mount Hardware and Accessories for NVX XUBT3 Controller
• NVX XUBT3 Controller Sold Separately
• Fits Most Handlebars Up To 1" Diameter
• Perfect for Motorcycles, bikes and ATVs

• Pre-cut and loomed power/ ground & speaker wire harnesses
• 4GA into dual 8GA power / ground wire
• 150 amp MIDI fuse
•Fusing and pre-terminated wiring

• High Density Universal A Pillar Pod for 2.5" Tweeters
• Durable high-density and durable plastic construction
• Enclosure houses 2 2.5" dome tweeters
• UV protected and all elements ready

• Use with the HE-WRRK

• 15" square subwoofer mesh grille
• Fits for 15" Solo-Baric L7S subwoofers
• Protects against damage
• Black mesh design

• Universal rubber mast top side mount antenna
• Support and elevate an antenna for AM/FM
• Features 1" swivel base for easy adjustment

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• Dual USB water resistant knockout panel
• Mounts in dash
• Includes protective cover
• Uses a 1-1/8 inch mounting hole

• 80 watts x 2 channel @ 4 ohm
• 125 watts x 2 channel @ 2 ohm
• Bridged: 290 watts x 1 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 1 ohm Stable 2-Channel Amplifier

• 220 watts x 4 channel @ 4 ohm
• 355 watts x 4 channel @ 2 ohm
• Bridged: 700 watts x 2 channel @ 4 ohm
• Total RMS Power: 1420 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 6x9" Punch V2 Surface Mount Speaker Mesh Grilles
• Designed for use in select Rockford Fosgate Punch V2 speakers
• Surface mount design installs directly onto mounting surface
• Ideal for applications that disregard grille height

• Ported enclosure with 1 12" W6 v3 Series Subwoofer
• 600 watts RMS
• Final Impedance: 2-ohm
• Dimensions: 14.5" L x 16" H x 24" W

• For Ultra-luxury high-end vehicles
• 12-24V universal usage
• Environmentally friendly and flame retardant materials
• Suitable for refit control of all equipment in the car
• Output short-circuit protection, overload protection
• Suitable for installation and use of all 12/24v battery vehicles

• Rear-View Monitor and Backup Camera Set
• 7" TFT-LCD monitor display panel
• Bar-type license plate camera with wide angle view
• Selectable parking guide lines

• 10" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.90 cubic feet
• Premium Black Carpet with Black NVX Logo

• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.25"
• Sensitivity: 80.49 dB

• High Conductivity Platinum Plating
• Maximum Current Transfer
• 200 Amp Rating
• ANL Style Fuse
• 1 Pack

• 12 -Volt Car Battery
• Fits in many German and Japanese vehicle models
• Fits on Audi, BMW, VW, Lexus, Subaru and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

•Compact Siren
• Add-On Component
• Works with Select FlashLogic Systems

• RMS: 250W Power Handling
• Mineral-Filled Polypropylene Cone
• Single 4 Ohm
• Vented Reinforcement Collar
• Elevated Frame Cooling
• Floating Cone Attach Method (FCAM)

• 15" SoloX Series Dual 2-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 2-ohm
• Alignment shims are included for installation

• 12 -Volt Car Battery
• Fits in many Domestic and Japanese vehicle models
• Fits on Nissan, Mazda, Mitsubishi, Honda, and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• Designed to be flexible, allowing users offers limitless combinations of amplifiers and channel architectures
• USB port available for firmware updates
• TüN software controlled by master MVi amplifier

• 1" replacement diaphragm for Cerwin Vega P5T tweeter
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• 0.75" Replacement Diaphragm for MO75T2 Tweeter
• Specifically designed for MO75T2 (MO75TRK)
• Direct-fit design allows hassle-free installation
• Impedance: 2-ohm

• ProWedge 13" W7AE Loaded Sealed Subwoofer Enclosure
• 3000W Peak
• 1500W RMS
• 3 Ohm Final Impedance
• High Grade Black Carpet Finish
• Engraved JL Audio and W7 Logos
• Rear Firing Design
• 10th Anniversary Edition W7 Subwoofer

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 2 ohm
• Paper Cone
• Foam Surround
• Mount depth: 3.79"
• Sensitivity: 81.6 dB

• Quick Disconnect Clamps
• For Marine Use
• Designed to Fit Towers or Roll Bars with Widths 1-1/5" to 2"
• 360° Rotation
• Black

• 1/4 inch
• refill package
• heat shrink < /br>

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 8.86"
• Sensitivity: 88 dB

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 1800 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• Peak Power: 500 watts
• RMS Power: 250 watts
• Fiber-Reinforced High Strength Paper Cone
• Impedance: Dual 2 ohm
• Sensitivity: 82 dB

• 12 -Volt Car Battery
• Fits in many European vehicle models
• Fits on Ferrari, Lamborghini, and Saab
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• Universal mini piezoelectric siren
• Loud warning sound
• Compact and discreet sizing
• Easy 2-wire connection
• Impact-resistant housing
• Universal compatibility
• Sold individually

• 12" Amplified Loaded Subwoofer System
• 1000 watts RMS
• Includes one MTX Audio TN500.1 amplifier
• Variable bass boost
• Mono preamp output
• EBC wired bass level remote control

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.75 cubic feet
• Premium Black Carpet with Black NVX Logo

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Dual 2 ohm
• Mica Injected Polypropylene - MIPP Cone
• Poly-Foam Surround
• Mount depth: 4.319"
• Sensitivity: 87 dB

• 12 -Volt Car Battery
• Fits in many Domestic, Japanese and European vehicle models
• Fits on Audi, Chevrolet, Ford, GMC, Volkswagen and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction

• 12 -Volt Car Battery
• Fits in many Domestic, Japanese and European vehicle models
• Fits on Jeep, Chrysler, Bentley, Nissan and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• 12-volt Powersports Absorbed Glass Mat (AGM) Battery
• Sealed and non-spillable Absorbed Glass Mat (AGM) design
• Fits JIS battery type BTX9-BS applications
• Factory activated ready for use
• Cranking Amps: 125 amps

• 20 square feet tri-layer sound deadening kit
• Made with butyl rubber, aluminum foil, and foam
• Material Used: Vibration Dampener
• Material Thickness: 1/8"
• Install Location: Entire Vehicle
• Pack includes five 18" x 32" sheets

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• SoloKon Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-1/8"
• Sensitivity: 86.54 dB

• 12 -Volt Car Battery
• Fits in many Domestic and Japanese vehicle models
• Fits on Dodge, Chrysler, Mitsubishi, Honda, and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.000"
• Color: Black

• Made with heavy-gauge steel
• Box is universal
• High quality at an affordable price
• Bottom of the boxes have predrilled flanges

• In-Dash Knockout Panel
• Adds USB Ports
• Installs in Dash