Discontinued 2-Channel Amplifiers

Used, Missing Harness, Marks

• RMS Power: 500W x 2 @ 4 ohm
• Total Peak Power: 4000W
• CEA-2006 Compliant
• Dimensions: 6.5"W x 16.1"L x 2.1"H

2-Channel Power Amplifier • 180W RMS x 2 @ 4 • High & Low Level Inputs • Tri-Mode • Variable HPF/LPF • iX² Bass Boost Circuit • Unregulated PWM Power Supply • Extruded Aluminum Heatsink

300W 2 channel Millennia Series Amplifier • 125W x 2 (@ 2 Ohm) power output • variable high/lo electronic crossover • variable bass boost • remote turn on/off • preamp outputs • power LED indicator • LED protection indicator • MOSFET power supply

2-Channel Impact Series Car Amplifier • 4 ohm: 400 watts x 2 chan. • 2 ohm: 1000 watts x 2 chan. • Bridged, 4 ohm: 2000 watts x 1 chan. • Pulse Width Modulated MOSFET Power Supply • 2 or Mono Channel Operation

• 100 Watts RMS x 2 @ 4 ohm
•200 Watts RMS x 2 @ 2 ohm
• 400 Watts RMS x 1 @ 4 ohm, bridged
• CEA-2006 Compliant
• Aluminum Heatsink
• Dimensions: 8-5/16" W x 9-9/16" L x 2-1/8" H

D7 Series 2-Channel Amplifier • 150W x 2 chan. @ 4 Ohm • 300W x 2 chan. @ 2 Ohm • fully regulated power supply • third-order Butterworth crossover • gold plated copper circuit board • forced-air cooling system

Rack mount, 2-channel high current amplifier • 1200 watts x 2 chan. at 1 ohm • VU meters indicating output response • Cobalt blue illumination

600 watts Max, Class A/B 2-Channel Amplifier • 150 watts x 2 chan. @ 2 ohm • 300 watts x 1 chan. @ 4 ohm Bridged • MOSFET Power Supply • Variable High Pass and Low Pass Crossover • Soft Delay Remote Turn On/Off Circuit • Self Diagnostic Protection Circuit, LED indicates Impedance Overload, Speaker Short Circuit, Thermal Overheating, and DC Output

• RMS: 200W x 2 @ 4 ohm
• Total Peak Power: 800W
• Nickel-plated RCA low level inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Wired remote bass level control included
• 11.00" W x 7.26" L x 2.87" H

200 watts x 2 into 2 ohm • 400 watts x 1 bridged • selectable low-pass crossover • red LED power indicator

Phanatik Series 2-Channel Class AB Car Amplifier • 450W x 2 chan. @ 4 ohm • 540W x 2 chan. @ 2 ohm • 1080W x 1 chan. @ 4 ohm • 2400W x 1 chan. Max • PWM (Pulse Width Modulated) MOSFET power supply and transistor outputs • Preamp RCA outputs

Punch Series 700S 175W x 2 Car Amplifier 700 watts RMS x 1 bridged • variable high-pass/low-pass crossover • wired remote control of Punch Bass

Vibe Pro Series 2-Channel Car Amplifier • 875W x 2-Chan. @ 4 Ohm • 1575W x 2-Chan. @ 2 Ohm • Preamp RCA Outputs To Daisy Chain Multiple Amps • 2-Way System Protection Circuitry • DC To DC Switching Power Supply

A Series 2-Channel Class AB Car Amplifier • 230W x 2 chan. @ 4 ohm • 1000W x 2 chan. Max • MOSFET power supply • Preamp RCA outputs

• 450 Watts x 2 @ 4 ohm
• 900 Watts x 2 @ 2 ohm
• 1800 Watts x 1 @ 4 ohm, Bridged
• Speaker-level (high-level) inputs
• 2 channel or mono operation
• Signal to Noise Ration: >90 dB
• Variable Bass Boost: 0 to +9 dB bass boost at 45 Hz
• Dimensions: 9.29" L x 13.39" W x 2.17" H

2-Channel High Current Power Amplifier • 150W RMS x 2 @ 4 • 900W RMS x 1 @ 1 Bridged • Hour Meter • Remote Voltmeter • Bass Remote • ANL Fuse Holder and Fuse • Acrylic Cover

• 250 Watts RMS x 2 @ 4 ohm
• 500 Watts RMS x 2 @ 2 ohm
• 1,000 Watts RMS x 1 @ 4 ohm, bridged
• Total RMS Power: 1,000 Watts
• Built-in High and Low Pass Filters
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 12.63" W x 10.5" L x 3.25" H

1000 watt 2 Channel Class-A/B Amplfier • 250W RMS x 2 @ 1 Ohm • 500W RMS x 1 chan. @ 2 Ohm • Tri-Mode Operation • Soft Start Circuitry