Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued 2-Channel Amplifiers

Discontinued 2-Channel Amplifiers

Filters
Like New & Used ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition
Like New & Used,

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

SPL FX2-2600 Factory Refurbished

2600W Max, FX Series 2-Channel Amplifier

FX2-2600 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SPL FX2-2600 Factory Refurbished

2600W Max, FX Series 2-Channel Amplifier

• 2600W Max, FX Series 2-Channel Amplifier • 4 ohm: 450 watts x 2 chan • 2 ohm: 540 watts x 2 chan • Bridged, @ 4 ohm: 1080 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• 2600W Max, FX Series 2-Channel Amplifier • 4 ohm: 450 watts x 2 chan • 2 ohm: 540 watts x 2 chan • Bridged, @ 4 ohm: 1080 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

Autotek ATX1000.2 Open Box

1000W Max 2-Channel Class AB ATX Series Amplifier

ATX1000.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Autotek ATX1000.2 Open Box

1000W Max 2-Channel Class AB ATX Series Amplifier

• Max Power: 4 ohm: 250 watts x 2 chan., 2 ohm: 500 watts x 2 chan.
• PWM MOSFET Power Supply
• Bass Boost
• Soft Start Turn-On
• High Level Inputs
• Preamp RCA Outputs
• 4-Way System Protection Circuitry
• Flat Panel Heatsink Design
• Subsonic Filter

• Max Power: 4 ohm: 250 watts x 2 chan., 2 ohm: 500 watts x 2 chan.
• PWM MOSFET Power Supply
• Bass Boost
• Soft Start Turn-On
• High Level Inputs
• Preamp RCA Outputs
• 4-Way System Protection Circuitry
• Flat Panel Heatsink Design
• Subsonic Filter

Autotek MMA2000.2 LIKE NEW DAMAGED PACKAGING

2000W 2-Channel Mean Machine Series Car Amplifier

MMA2000.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Autotek MMA2000.2 LIKE NEW DAMAGED PACKAGING

2000W 2-Channel Mean Machine Series Car Amplifier

Like new Damaged Package
• RMS: 500W x 2 @ 4 ohm, 1000W x 2 @ 2 ohm, Bridged: 2000W x 1 @ 4 ohm
• Total Peak Power: 2000W
• Pro- Fi High Speed MOSFETs
• Auto-Step PWM MOSFET Power Supply
• ROAD WORTHYTM TCID
• 4/2 channel operation

Like new Damaged Package
• RMS: 500W x 2 @ 4 ohm, 1000W x 2 @ 2 ohm, Bridged: 2000W x 1 @ 4 ohm
• Total Peak Power: 2000W
• Pro- Fi High Speed MOSFETs
• Auto-Step PWM MOSFET Power Supply
• ROAD WORTHYTM TCID
• 4/2 channel operation

Precision Power PPI BA800.2 Factory Refurbished

800W 2-Channel Black Ice Series Class A/B Car Amplifier

BA800.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Precision Power PPI BA800.2 Factory Refurbished

800W 2-Channel Black Ice Series Class A/B Car Amplifier

• RMS: 130W x 2 @ 4 ohm, 200W x 2 @ 2 ohm, Bridged 400W x 1 @ 4 ohm
• Total Peak Power: 800W
• 2 or Mono Channel Operation
• FEATURE (Boost/etc)
• Heavy Duty Aluminum Alloy Heat-Sink

• RMS: 130W x 2 @ 4 ohm, 200W x 2 @ 2 ohm, Bridged 400W x 1 @ 4 ohm
• Total Peak Power: 800W
• 2 or Mono Channel Operation
• FEATURE (Boost/etc)
• Heavy Duty Aluminum Alloy Heat-Sink

Autotek Mean Machine M1600.2 (Factory Refurbished)

1600W Max Mean Machine Series 2-Channel Car Audio Amplifier

M1600.2-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Autotek Mean Machine M1600.2 (Factory Refurbished)

1600W Max Mean Machine Series 2-Channel Car Audio Amplifier

• Mean Machine Series 2-Channel Class A/B Car Amplifier
• 1600 Watts Max
• 800 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters

• Mean Machine Series 2-Channel Class A/B Car Amplifier
• 1600 Watts Max
• 800 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters

TIS Audio T1802A R/B

1800W Max, Class AB 2-Channel High Performance Bridgeable Amplifier

T1802A-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

TIS Audio T1802A R/B

1800W Max, Class AB 2-Channel High Performance Bridgeable Amplifier

2-Channel Class AB High Performance Car Amplifier • MOSFET Power Supply • LED Power & Protect Indicators • Variable Bass Boost • Speaker-Level Inputs • 3-Way System Protection Circuitry • Built-In Cooling Fan

2-Channel Class AB High Performance Car Amplifier • MOSFET Power Supply • LED Power & Protect Indicators • Variable Bass Boost • Speaker-Level Inputs • 3-Way System Protection Circuitry • Built-In Cooling Fan

JVC KS-AX4302 R/B

600W Max 2-Channel Amplifier

KS-AX4302-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JVC KS-AX4302 R/B

600W Max 2-Channel Amplifier

JVC 2-Channel Class A/B Car Amplifier • 600 Watts Max • 200 Watts x 1 Chan. Bridged @ 4 Ohm • 100 Watts x 2 Chan. @ 4 Ohm • Anti Pop Circuitry • Angle Mount Block Terminals • 4-Way System Protection Circuitry

4

JVC 2-Channel Class A/B Car Amplifier • 600 Watts Max • 200 Watts x 1 Chan. Bridged @ 4 Ohm • 100 Watts x 2 Chan. @ 4 Ohm • Anti Pop Circuitry • Angle Mount Block Terminals • 4-Way System Protection Circuitry

SPL FX2-1250 Factory Refurbished

1250W Max FX Series 2-Channel Amplifier

FX2-1250 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SPL FX2-1250 Factory Refurbished

1250W Max FX Series 2-Channel Amplifier

1250W Max, FX Series 2-Channel • 4 ohm: 220 watts x 2 chan. • 2 ohm: 280 watts x 2 chan. • Bridged, @ 4 ohm: 360 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

1250W Max, FX Series 2-Channel • 4 ohm: 220 watts x 2 chan. • 2 ohm: 280 watts x 2 chan. • Bridged, @ 4 ohm: 360 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

Crunch PZ1200.2 Open Box Complete

1200W Max PowerZone Series 2-Channel Car Audio Amplifier

PZ1200.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Crunch PZ1200.2 Open Box Complete

1200W Max PowerZone Series 2-Channel Car Audio Amplifier

• Item Condition: Open Box Complete
• 1200 Watts Max
• 600 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters

• Item Condition: Open Box Complete
• 1200 Watts Max
• 600 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters

Power Acoustik STAX 2200/2 (STAX2200/2) Factory Refurbished

2200W Max STAX Series 2-Channel Class A/B Amplifier

STAX2200/2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Power Acoustik STAX 2200/2 (STAX2200/2) Factory Refurbished

2200W Max STAX Series 2-Channel Class A/B Amplifier

STAX 2-Channel Class A/B Car Amplifier • 370 Watts x 2 Chan. @ 4 Ohm • 450 Watts x 2 Chan. @ 2 Ohm • 2200 Watts Max • 3-Way System Protection Circuitry • MOSFET Power Supply • Preamp RCA Outputs •

2

STAX 2-Channel Class A/B Car Amplifier • 370 Watts x 2 Chan. @ 4 Ohm • 450 Watts x 2 Chan. @ 2 Ohm • 2200 Watts Max • 3-Way System Protection Circuitry • MOSFET Power Supply • Preamp RCA Outputs •

Memphis 16-PR2.75 R/B

(Refurbished) Power Reference PR Series 2-Channel Amplifier

16-PR2.75-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Memphis 16-PR2.75 R/B

(Refurbished) Power Reference PR Series 2-Channel Amplifier

Power Reference Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 100W x 2 chan. @ 2 ohm • 200W Max x 1 chan. Bridged • LED power and protection indicators • Bridgeable operation

Power Reference Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 100W x 2 chan. @ 2 ohm • 200W Max x 1 chan. Bridged • LED power and protection indicators • Bridgeable operation

JVC KS-AX3002 R/B

370W Max Compact 2-Channel Amplifier

KS-AX3002-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JVC KS-AX3002 R/B

370W Max Compact 2-Channel Amplifier

JVC 2-Channel Class A/B Car Amplifier • 370 Watts Max • 65 Watts x 2 Chan. @ 4 Ohm • 90 Watts x 2 Chan. @ 2 Ohm • 4-Way System Protection Circuitry • Preamp RCA Output • Speaker-Level Inputs With Signal Sensing

1

JVC 2-Channel Class A/B Car Amplifier • 370 Watts Max • 65 Watts x 2 Chan. @ 4 Ohm • 90 Watts x 2 Chan. @ 2 Ohm • 4-Way System Protection Circuitry • Preamp RCA Output • Speaker-Level Inputs With Signal Sensing

SPL XL2-1600 R/B

1600W, XL Series 2-Channel Car Amplifier

XL2-1600-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SPL XL2-1600 R/B

1600W, XL Series 2-Channel Car Amplifier

XL Series 2-Channel Class A/B Car Amplifier • 740W RMS • 370W x 2 Chan @ 2 Ohm • Switchable On/Off Bass Boost at 45 Hz • Speaker-Level Inputs • Preamp RCA Outputs • Variable High/Low-Pass Filter • Delayed Remote Start

XL Series 2-Channel Class A/B Car Amplifier • 740W RMS • 370W x 2 Chan @ 2 Ohm • Switchable On/Off Bass Boost at 45 Hz • Speaker-Level Inputs • Preamp RCA Outputs • Variable High/Low-Pass Filter • Delayed Remote Start

Soundstream PCX2-700-RB

700W RMS Picasso Series 2-Channel Amplifier

PCX2-700-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Soundstream PCX2-700-RB

700W RMS Picasso Series 2-Channel Amplifier

Picasso Series 2-Channel Class AB Car Amplifier • 220W x 2 Chan. @ 4 ohm • 350W x 2 chan. @ 2 ohm • 700 Watts Total • Bi-linear selectable • Tuned Bass EQ • Platinum-Plated Contacts • End Caps Included

Picasso Series 2-Channel Class AB Car Amplifier • 220W x 2 Chan. @ 4 ohm • 350W x 2 chan. @ 2 ohm • 700 Watts Total • Bi-linear selectable • Tuned Bass EQ • Platinum-Plated Contacts • End Caps Included

Autotek ATX1000.2 (Factory Refurbished)

1000W Max 2-Channel Class AB ATX Series Amplifier

LS-ATX1000.2-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Autotek ATX1000.2 (Factory Refurbished)

1000W Max 2-Channel Class AB ATX Series Amplifier

• Max Power: 4 ohm: 250 watts x 2 chan., 2 ohm: 500 watts x 2 chan.
• PWM MOSFET Power Supply
• Bass Boost
• Soft Start Turn-On
• High Level Inputs
• Preamp RCA Outputs
• 4-Way System Protection Circuitry
• Flat Panel Heatsink Design
• Subsonic Filter

• Max Power: 4 ohm: 250 watts x 2 chan., 2 ohm: 500 watts x 2 chan.
• PWM MOSFET Power Supply
• Bass Boost
• Soft Start Turn-On
• High Level Inputs
• Preamp RCA Outputs
• 4-Way System Protection Circuitry
• Flat Panel Heatsink Design
• Subsonic Filter

SPL FX2-2200 Factory Refurbished

2200W Max FX Series 2-Channel Amplifier

FX2-2200 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SPL FX2-2200 Factory Refurbished

2200W Max FX Series 2-Channel Amplifier

• 2200W Max, FX Series 2-Channel Amplifier • 4 ohm: 370 watts x 2 chan • 2 ohm: 450 watts x 2 chan •Bridged, @ 4 ohm: 900 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• 2200W Max, FX Series 2-Channel Amplifier • 4 ohm: 370 watts x 2 chan • 2 ohm: 450 watts x 2 chan •Bridged, @ 4 ohm: 900 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

Pioneer GM-A5602 Open Box Complete

900W Peak (450W RMS) 2-Channel A Series Bridgeable Class AB 2-Ohm Stable Car Amplifier

GM-A5602 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Pioneer GM-A5602 Open Box Complete

900W Peak (450W RMS) 2-Channel A Series Bridgeable Class AB 2-Ohm Stable Car Amplifier

• Open Box Complete
• RMS: 150W x 2 @ 4 ohm, 225W x 2 @ 2 ohm, 450W x 1 @ 4 ohm
• Total Peak Power: 900W
• CEA-2006 Compliant
• Dimensions: 13-3/4"W x 8-1/2"L x 2-1/2"H

• Open Box Complete
• RMS: 150W x 2 @ 4 ohm, 225W x 2 @ 2 ohm, 450W x 1 @ 4 ohm
• Total Peak Power: 900W
• CEA-2006 Compliant
• Dimensions: 13-3/4"W x 8-1/2"L x 2-1/2"H

Hifonics SATURN A4000 R/B

400W RMS Andromeda Series 2-Channel Amplifier

SATURNA4000-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics SATURN A4000 R/B

400W RMS Andromeda Series 2-Channel Amplifier

Andromeda Series 2-Channel Class A/B Amplifier • 200W x 2-Chan @ 2 Ohm • 100W x 2-Chan @ 4 Ohm • Ultra-Fi MOSFET Power Supply • Preamp RCA Outputs • Fully Adjustable Accu-Cross Crossovers • Tri-Mode Operation

1

Andromeda Series 2-Channel Class A/B Amplifier • 200W x 2-Chan @ 2 Ohm • 100W x 2-Chan @ 4 Ohm • Ultra-Fi MOSFET Power Supply • Preamp RCA Outputs • Fully Adjustable Accu-Cross Crossovers • Tri-Mode Operation

Pyle PLA2378 Open Box Complete

2000W Max Class A/B 2-Channel Power Series Car Amplifier

PLA2378 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Pyle PLA2378 Open Box Complete

2000W Max Class A/B 2-Channel Power Series Car Amplifier

• Open Box Complete
• 1000W Max x 2 Chan. @ 4 ohm
• 2000W Max x 1 Chan. @ 4 ohm Bridged
• Preamp RCA Outputs
• Variable Crossover Network
• 3-Way Protection Circuitry

• Open Box Complete
• 1000W Max x 2 Chan. @ 4 ohm
• 2000W Max x 1 Chan. @ 4 ohm Bridged
• Preamp RCA Outputs
• Variable Crossover Network
• 3-Way Protection Circuitry

Pyle Pro PLMPA35 Open Box Missing (Good, Used)

300W 2-Channel Class AB Mini Amplifier With 3.5mm Input Open Box Missing (Good, Used)

PLMPA35 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Pyle Pro PLMPA35 Open Box Missing (Good, Used)

300W 2-Channel Class AB Mini Amplifier With 3.5mm Input Open Box Missing (Good, Used)

• RMS Power: 15W x 2 @ 4 ohm
• Total Peak Power: 300W
• 3.5mm AUX Input/0.125" Stereo Inputs
• Dimensions: 2.99"W x 3.94"L x 1.4"H
• 3 Way Electronic Crossover Network
• Adjustable Gain Control

• RMS Power: 15W x 2 @ 4 ohm
• Total Peak Power: 300W
• 3.5mm AUX Input/0.125" Stereo Inputs
• Dimensions: 2.99"W x 3.94"L x 1.4"H
• 3 Way Electronic Crossover Network
• Adjustable Gain Control

1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in Discontinued 2-Channel Amplifiers

    2 Channel Amplifiers Frequently Asked Questions (FAQ)
    Yes, many 2-channel amplifiers can be used in bridge mode to combine the power of both channels, making them suitable for powering a subwoofer and speakers at the same time. However, it's essential to check the amplifier's specifications and power ratings to ensure they match the impedance and power requirements of your subwoofer and speakers. Additionally, using a 2-channel amplifier for this purpose can result in power distribution challenges, as both the subwoofer and speakers may not receive optimal power for their specific frequency ranges.
    A 2-channel amplifier, also known as a stereo amplifier, is designed to power two speakers, typically a pair of front speakers or a pair of rear speakers. On the other hand, a mono amplifier, also known as a single-channel amplifier, is dedicated to powering a single speaker, usually a subwoofer. The primary difference lies in their application and configuration. While a 2-channel amplifier is suitable for powering multiple speakers, a mono amplifier is more focused on delivering high power output to a single speaker for deep bass reproduction.
    Yes, upgrading your factory car audio system with a 2-channel amplifier can significantly enhance the overall sound quality and volume. Factory audio systems often lack the power needed to drive aftermarket speakers properly. Adding a 2-channel amplifier allows you to provide more power to your front or rear speakers, resulting in improved clarity, detail, and dynamics. It's an excellent way to breathe new life into your car's audio system without the need for extensive modifications. Be sure to select an amplifier with an appropriate power rating and ensure compatibility with your existing audio setup.
    To ensure compatibility, consider factors like power output, impedance, and form factor. Check the power ratings of your speakers and subwoofers, and choose an amplifier that can deliver the required power at the appropriate impedance. Additionally, verify that the amplifier's dimensions fit within the available space in your vehicle. Some 2-channel amplifiers come with adjustable crossovers and gain controls, allowing you to fine-tune the audio output to match your specific setup. If you have any uncertainties, consult with an audio specialist or contact Sonic Electronix customer support for expert assistance.
    While 2-channel amplifiers can provide power to two speakers, they are typically not designed for bi-amping applications. Bi-amping involves using separate amplifiers for the tweeters and woofers of a speaker system to improve audio performance. To bi-amp speakers, you would require an additional set of channels dedicated to each driver. In this case, a multi-channel amplifier or a combination of mono and stereo amplifiers is more suitable. If bi-amping is a priority, consider looking into multi-channel amplifiers that offer specific configurations for bi-amping setups. Always check the specifications and features of the amplifier to ensure it can support bi-amping before making a purchase.

    All About Discontinued 2-Channel Amplifiers

    Car Audio 2-Channel Amplifier

    If you desire to hear superb sound quality with clear highs and deep lows, adding an amplifier will let you unlock the true potential of your vehicle's audio system.

    A 2-channel amplifier is the best fit for a vehicle running a two-speaker audio system. Providing an additional channel than mono amplifiers, it's usually the pick of car audio tuners for powering a pair of front speakers to enhance the overall quality of your audio system to its maximum capabilities. This amplifier is also versatile. Transforming the output of its two channels through "bridging" allows you to utilize a subwoofer - a perfect upgrade to your audio system that truly elevates your vehicle listening experience by putting deep and powerful bass frequencies into the forefront alongside crisp highs. It will surely give your audio system the boost that you never knew you needed!

    Having a 2-channel amplifier in your audio system is the right thing to do if you're an audiophile who wants to bring the beat with them as you ride without the annoyance of distortion to hinder your jams. This amplifier can be utilized in a car, a motorcycle, a boat, or your own house audio system setup. Here at Sonic Electronix, you'll find the best 2-channel amplifiers including Class A/B amplifiers which features higher efficiency, less distortions, and is the most commonly used type of audio power amplifier design - all certified powerhouses in providing your audio system the enhancement it needs. Check out our extensive list of 2-channel amplifiers from Pioneer, JVC, NVX, Belva, Kicker, Rockford Fosgate, Cerwin-Vega, and more.

    Visit our Learning Center: "What does it mean to Bridge an Amplifier"

    If you're searching for the best quality 2-channel amplifiers, you've come to the right place. Our extensive selection guarantees that you'll find only the finest products to enhance your car audio experience. Whether you're an audiophile or a music enthusiast, our range of high-performance 2-channel amplifiers ensures a powerful and immersive sound that will elevate your driving journey.

    2-channel amplifiers are an essential component of any car audio setup, offering a range of advantages that make them highly sought after by audio enthusiasts. One of the primary benefits of a 2-channel amplifier is its versatility. As the name suggests, a 2-channel amplifier has two output channels, allowing you to power a pair of speakers independently. This versatility makes them ideal for powering a set of component speakers in the front and coaxial speakers in the rear of your vehicle.

    Another advantage of 2-channel amplifiers is their ability to deliver a more robust and cleaner sound compared to relying solely on your car's built-in stereo system. By amplifying the audio signal, these amplifiers ensure that your speakers receive enough power to reproduce the sound accurately and without distortion. This results in a clearer and more detailed audio experience, even at higher volumes.

    Moreover, 2-channel amplifiers are relatively compact and easy to install, making them a popular choice for car audio enthusiasts who may have limited space in their vehicle. Their straightforward design and wiring configurations make installation hassle-free and user-friendly.

    At Sonic Electronix, we are committed to helping you find the best 2-channel amplifiers that suit your specific needs and preferences. Our team of car audio experts is here to assist you throughout your shopping journey. Whether you need advice on selecting the perfect amplifier for your car's audio system or have questions about compatibility, we are always ready to provide knowledgeable guidance.

    For personalized assistance, feel free to call us at 1-502-200-8010, and our friendly staff will be delighted to address your inquiries and ensure you find the ideal 2-channel amplifier for your car audio setup.

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2001 Ford Explorer Sport Trac

    1996 Pontiac Firebird

    2003 Buick LeSabre

    2007 Dodge Magnum

    1995 Buick LeSabre

    1991 BMW 325iX

    2008 Nissan Pathfinder

    2003 Chevrolet Avalanche 2500

    2022 Honda Ridgeline

    2023 Alfa Romeo Giulia

    Vehicle
    Store     Delete

    2018 Can-Am Defender XT CAB HD8

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1996 Firebird
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo