Discontinued Programmers, Testers, & Meters

• Measures sound pressure level (SPL)
• Measures Voltage
• Amplitude range from 120 to 160 dB
• Frequency range from 20 to 120 Hz
• Calibrated according to TERM-LAB Classic and Magnum
• Bright display for easy visibility

• Calibration CD for JL Audio CleanSweep
• Contains Tracks for General System Tuning
• Channel & Phase Identification
• Pink Noise
• Sine Waves

60 - 130db Handheld SPL Meter • Compact Size • Handheld • Accurate Readings

• Sound Test Kit
• Phase Tester, Probes, C-D Included
• Built-in microphone
• Built in pulse generator for both speaker level and preamp level connections directly to a component (speaker, amplifier, signal processor, etc.)

Digital Multimeter • Tests Cell Phones or Other Batteries • 10 MegOhm • Tests 110 and 220 Volt AC Household Circuits • Displays DC Current/Amperage

Mobile Electronics Installation Kit • Multimeter / Crimper / Multi-bit Screwdriver / Dash Panel & Trim Piece Removal Tool / Wiring Hardware (Butt Connectors)

• Calibrated, full range, omni-directional test and measurement microphone
• Direct connection to iOS devices running iOS 6.1 or later
• Redesigned to minimize the effect of high-frequency diffraction
• Features increased max SPL handling – up to 140 dB SPL
• Keeps iOS device charged during extending use with included AC adapter

60 - 130db Handheld SPL Meter • Compact Size • Handheld • Accurate Readings

• USB PC Update Cable For Select Axxess Interfaces
• USB To PC Interface To Download Firmware Updates
• Updates Ensure Compatibility

Bitwriter Upgrade Chip Version 2.6 • Used To Replace The Older Model Bitwriter Chips • Upgrade Chip Allows Your Old Bitwriter To Program All The Latest Directed ESP Alarm And Remote Start Systems

• Allows the ability to update Axxess interfaces from most smart devices
• Freedom to update without a computer
•Must be connected to either a cellular network or Wi-Fi hotspot to update
• Allows changes to be made to the ASWC-1 (dual assign / force radio / re-assign buttons)
•Universal

Bitwriter Upgrade Chip Version 2.7 • Used To Replace The Older Model Bitwriter Chips • Upgrade Chip Allows Your Old Bitwriter To Program All The Latest Directed ESP Alarm And Remote Start Systems

• 3-Digit LED Digital VoltMeter
• Silver Surface w/ Red Digital Display
• Flush or Surface Mountable
• Durable Rubberized Finish
• Auto-Sensing Turn On

Bitwriter Upgrade Chip Version 2.3 • Used To Replace The Older Model Bitwriter Chips • Upgrade Chip Allows Your Old Bitwriter To Program All The Latest Directed ESP Alarm And Remote Start Systems

Digital Multi-Meter

Distortion Detector/Analyzer for High(er) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 200Vrms. (40,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

The GEN1KHD is used for identifying speaker wires in car audio systems, provides a calibrated output for setting component output levels, and is an effective tool for determining how noise is entering a car audio system.

• Dynamic voltage drop testing
• Voltage snapshot
• Min/Max glitch capture
• Power and ground LED indicatorsRE 7

Speakers must operate with the same relative polarity for proper sound reproduction, the PLR1 allows for one to test the polarity of every individual speaker

• Adjustable Alternator Voltage Boost Module
• Includes In-Dash Controller
• Blue LED Voltmeter Displays the Charging Voltage
• For Select 1996–2004 GM Vehicles