An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D (35)

Number of Channels

Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.

Total RMS Power Output

Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

Up to 250 watts (8)

250–500 watts (5)

500–1,000 watts (17)

1,000–1,500 watts (3)

1,500 watts and up (2)

Total Peak Power Output

The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

Up to 500 watts (26)

500–1,000 watts (2)

1,000–2,000 watts (6)

2,000–3,000 watts (1)

Minimum Impedance Unbridged

The lowest impedance the amplifier will handle when it is not bridged.

2 (29)

1 (2)

4 (2)

Minimum Impedance Bridged

The lowest impedance the amplifier will handle when it is bridged.

4 ohms (20)

Not Bridgeable (7)

2 ohms (1)

Remote bass/level controller

If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.

Optional (18)

No (10)

Yes (4)

Preamp Outputs

Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.

Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker Level Inputs

Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.

Yes (13)

Optional (9)

No (7)

Maximum Input Gauge Size

This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.

Deals

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Bass Package Deals (5)

Availability

Shop the Category

Filters & Sort

Sort

Best Match

Best Rated
Biggest $ savings off list price
Biggest % savings off list price
Price: Lowest First
Price: Highest First
Product Name: A-Z
Product Name: Z-A
Newest First

Alpine KTA-200M with NVX 8 Gauge Amp Kit

200W RMS Class D Monoblock Subwoofer Amplifier

Compare

Go to item page

Alpine KTA-200M with NVX 8 Gauge Amp Kit

200W RMS Class D Monoblock Subwoofer Amplifier

• Power stack Capable
• CTA-2006 Compliant
• Fits in the open space behind Alpine’s iLX-W650
• 100W x 1 RMS
• 200W x 1 RMS
• 400W x 1 DPP
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

Was $395.99 Details

$329.94

In stock

Only 1 Left!

Add to Cart

• Power stack Capable
• CTA-2006 Compliant
• Fits in the open space behind Alpine’s iLX-W650
• 100W x 1 RMS
• 200W x 1 RMS
• 400W x 1 DPP
• Includes Amplifier Wiring Kit

Alpine HDA-M80 with NVX 4 Gauge Amp Kit

800W RMS Status Series Class-D Monoblock Car Amplifier

Compare

Go to item page

Alpine HDA-M80 with NVX 4 Gauge Amp Kit

800W RMS Status Series Class-D Monoblock Car Amplifier

• Peak RMS Power: Up to 800W
• Total RMS Power: 400 watts
• Quick-connect speaker and power connectors
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

121

Was $1223.99 Details

$976.94

In stock

Only 1 Left!

Add to Cart

• Peak RMS Power: Up to 800W
• Total RMS Power: 400 watts
• Quick-connect speaker and power connectors
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Alpine HDA-V90 with NVX 4 Gauge Amp Kit

900W RMS Status Series Class-D 5-Channel Car Amplifier

Compare

Go to item page

Alpine HDA-V90 with NVX 4 Gauge Amp Kit

900W RMS Status Series Class-D 5-Channel Car Amplifier

• 75 watts RMS x 4 + 300 watts RMS x 1 at 4 ohm
• 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohm
• 200 watts RMS x 2 bridged at 4 ohm + 500 watts RMS x 1 at 2 ohm
• Total RMS Power: 900 watts
• Quick-connect power and speaker connectors
• Class D 2 ohm Stable 5-Channel Amplifier
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

Was $1499.99 Details

$1,099.95

In stock

Only 2 Left!

Add to Cart

Alpine R-A90S with NVX XDSP66BT

R Series 6/5/4/3 Channel Power Amplifier with 15 Band Parametric EQ Digital Signal Processor

Compare

Go to item page

Alpine R-A90S with NVX XDSP66BT

R Series 6/5/4/3 Channel Power Amplifier with 15 Band Parametric EQ Digital Signal Processor

• Class D Amplifier
• CTA-2006 Compliant
• 6-Channel Amplifier
• Hi-Res Audio

Save 10% Off Package Deals at Checkout!

FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

Was $1189.99 Details

$774.94

In stock

Only 3 Left!

Add to Cart

• Class D Amplifier
• CTA-2006 Compliant
• 6-Channel Amplifier
• Hi-Res Audio

Alpine HDA-V90 with 15 Band Parametric EQ Digital Signal Processor

900W RMS Status Series Class-D 5-Channel Car Amplifier

Compare

Go to item page

Alpine HDA-V90 with 15 Band Parametric EQ Digital Signal Processor

900W RMS Status Series Class-D 5-Channel Car Amplifier

• 75 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 75 watts
• Class D 2 ohm Stable 5-Channel Amplifier

Save 10% Off Package Deals at Checkout!

FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

Was $1669.99 Details

$1,174.94

In stock

Only 2 Left!

Add to Cart

Wet Sounds SYN-DX 2 + NVX 4 Gauge Marine Amp Kit

750W RMS SYN-DX Series Bridgeable Full Range 2-Channel Class D Marine Amplifier (WetSounds)

Compare

Go to item page

Wet Sounds SYN-DX 2 + NVX 4 Gauge Marine Amp Kit

750W RMS SYN-DX Series Bridgeable Full Range 2-Channel Class D Marine Amplifier (WetSounds)

• 200 watts x 2 chan. @ 4 Ohm
• 375 watts x 2 chan. @ 2 Ohm
• 750 watts x 1 chan. @ 4 Ohm
• Total power output: 750 watts RMS
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
• Fuse Rating: 30 A x 3

Save 10% Off Package Deals at Checkout!

FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

121

Was $1243.98 Details

$1,176.98

In stock

Only 1 Left!

Add to Cart

Wet Sounds STX Micro 1 with NVX 8 Gauge Amp Kit

600W RMS Class-D 1-Ohm Stable Monoblock Compact Amplifier

Out of stock

Compare

Go to item page

Wet Sounds STX Micro 1 with NVX 8 Gauge Amp Kit

600W RMS Class-D 1-Ohm Stable Monoblock Compact Amplifier

• 250 Watts RMS x 1 @ 4 ohm
• 420 Watts RMS x 1 @ 2 ohm
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 600 Watts
• Frequency Response: 10 - 250Hz
• Dimensions: 4"W x 9.25"L x 1.5"H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

Was $525.98 Details

$489.98

Add to Cart

Wet Sounds SDX2 with NVX 4 Gauge Amp Kit

1250 Watt Sinister Series Full Range 2-Channel Class D Amplifier (WetSounds)

Out of stock

Compare

Go to item page

Wet Sounds SDX2 with NVX 4 Gauge Amp Kit

1250 Watt Sinister Series Full Range 2-Channel Class D Amplifier (WetSounds)

600W RMS R-Series Class-D 4-Channel Car Amplifier + NVX 4 Gauge 4-Channel Amp Wiring Kit

1370 Watt Sinister Series Full Range 4-Channel Class D Amplifier (WetSounds)

• RMS: 185W x 4 @ 4 ohm, 340W x 4 @ 2 ohm, Bridged: 685W x 2 @ 4 ohm
• Total RMS Power: 1370 watts
• Wet Sounds unique transformer
• Advanced Intelligent Microprocessor Control
• Top mounted crossover controls
• Dimensions: 9.82" W x 13.50" L x 2.70" H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

Was $1955.98 Details

$1,889.98

Add to Cart

Prev 1 2

Items per page: 20 40 60

Clear all

Popular Brands in Car Amplifier Packages & Bundles

Shop all brands

Hide all brands

We love people and we're ready to help you! See what separates us from our competition.

Free perks, no Prime^TM fees

Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.

Free install gear for stereos

Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.

Authentic & Authorized

We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.

View best sellers, deals, and more

Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!

Learn about All Car Audio

We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!

Call or email our experts

Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!

Why Shop With Us?

Subscribe

Welcome to the Team!

Car Amplifier Packages & Bundles

Shop the Category

Alpine KTA-200M with NVX 8 Gauge Amp Kit

Alpine KTA-200M with NVX 8 Gauge Amp Kit

Alpine HDA-M80 with NVX 4 Gauge Amp Kit

Alpine HDA-M80 with NVX 4 Gauge Amp Kit

Alpine HDA-V90 with NVX 4 Gauge Amp Kit

Alpine HDA-V90 with NVX 4 Gauge Amp Kit

Alpine R-A90S with NVX XDSP66BT

Alpine R-A90S with NVX XDSP66BT

Alpine HDA-V90 with 15 Band Parametric EQ Digital Signal Processor

Alpine HDA-V90 with 15 Band Parametric EQ Digital Signal Processor

Wet Sounds SYN-DX 2 + NVX 4 Gauge Marine Amp Kit

Wet Sounds SYN-DX 2 + NVX 4 Gauge Marine Amp Kit

Wet Sounds STX Micro 1 with NVX 8 Gauge Amp Kit

Wet Sounds STX Micro 1 with NVX 8 Gauge Amp Kit

Wet Sounds SDX2 with NVX 4 Gauge Amp Kit

Wet Sounds SDX2 with NVX 4 Gauge Amp Kit

Wet Sounds Sinister-SDX2500 with NVX 1/0 Gauge Amp Kit

Wet Sounds Sinister-SDX2500 with NVX 1/0 Gauge Amp Kit

Wet Sounds SDX-6 with NVX 4 Gauge Amp Kit

Wet Sounds SDX-6 with NVX 4 Gauge Amp Kit

Wet Sounds SYN-DX 6 with NVX 4 Gauge Amp Kit

Wet Sounds SYN-DX 6 with NVX 4 Gauge Amp Kit

Wet Sounds SYN-DX 4 with NVX 4 Gauge Amp Kit

Wet Sounds SYN-DX 4 with NVX 4 Gauge Amp Kit

Alpine R2-A60F with Amplifier Wiring Kit

Alpine R2-A60F with Amplifier Wiring Kit

Alpine HDA-F60 with NVX 4 Gauge Amp Kit

Alpine HDA-F60 with NVX 4 Gauge Amp Kit

Wet Sounds HTX-4 with NVX 4 Gauge Amp Kit

Wet Sounds HTX-4 with NVX 4 Gauge Amp Kit

Wet Sounds SDX4 with NVX 4 Gauge Amp Kit

Wet Sounds SDX4 with NVX 4 Gauge Amp Kit

Popular Brands in Car Amplifier Packages & Bundles

Didn't find your car?

Account

Shopping help

Company

Everyday heroes

Brand stores

Useful links