Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Car Audio & Electronics
  3. Car Amplifiers
  4. Car Amplifier Packages & Bundles

Car Amplifier Packages & Bundles

Filters
Wet Sounds ✕
Sound Extreme ✕
Clarion ✕
Clear Filters
Reset Done
Price Range
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Availability

Shop the Category

filter-icon Filters & Sort

Wet Sounds HTX-2 + 30% Off High Quality NVX Amp Kit

600W RMS 2-Channel HTX Series Class D Full-Range Marine Amplifier (WetSounds)

HTX-2, XKIT42 big
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds HTX-2 + 30% Off High Quality NVX Amp Kit

600W RMS 2-Channel HTX Series Class D Full-Range Marine Amplifier (WetSounds)

• 150 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 900 Watts RMS
• CEA-2006 Compliant
• Removable crossover/level control cover
• Conformal coated PCB boards
• Mono or 2 channel operation

Save 10% Off Package Deals at Checkout!
shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

120
Was $443.98 Details
$376.98

In stock

Only 3 Left!

Add to Cart

• 150 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 900 Watts RMS
• CEA-2006 Compliant
• Removable crossover/level control cover
• Conformal coated PCB boards
• Mono or 2 channel operation

Wet Sounds STX Micro-4 with NVX 8 Gauge Amp Kit

600W Peak (280W RMS) Class-D Compact 4-Channel 1-Ohm Stable Powersports Amplifier

STXMICRO4_XKIT84 big
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds STX Micro-4 with NVX 8 Gauge Amp Kit

600W Peak (280W RMS) Class-D Compact 4-Channel 1-Ohm Stable Powersports Amplifier

• 80 Watts RMS x 4 @ 4 ohm
• 130 Watts RMS x 4 @ 2 ohm
• Bridged, 4 ohm: 280 watts x 2 chan.
• Total Peak Power: 600 Watts
• Frequency Response: 10 - 40kHz
• Dimensions: 4"W x 9.25"L x 1.5"H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!
shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

38
Was $607.98 Details
$559.97

In stock

Only 1 Left!

Add to Cart

• 80 Watts RMS x 4 @ 4 ohm
• 130 Watts RMS x 4 @ 2 ohm
• Bridged, 4 ohm: 280 watts x 2 chan.
• Total Peak Power: 600 Watts
• Frequency Response: 10 - 40kHz
• Dimensions: 4"W x 9.25"L x 1.5"H
• Includes Amplifier Wiring Kit

Sound Extreme by ECOXGEAR SEI-AMP30041 with NVX 8 Gauge Amp Kit

300W RMS Class-D 4-Channel High Definition Marine Amplifier

A30041_XKIT84 big
Go to item page Right Arrow Icon of Right Arrow

Sound Extreme by ECOXGEAR SEI-AMP30041 with NVX 8 Gauge Amp Kit

300W RMS Class-D 4-Channel High Definition Marine Amplifier

• 75 watts x 4 channel @ 4 ohm
• Bridged: 150 watts x 2 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

38
Was $507.98 Details
$399.99

In stock

Only 1 Left!

Add to Cart

• 75 watts x 4 channel @ 4 ohm
• Bridged: 150 watts x 2 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

Sound Extreme by ECOXGEAR SEI-AMPEV30011 with NVX 8 Gauge Amp Kit

300W RMS EV Series Class-D Monoblock High Definition Marine Amplifier

EV30011_XKIT82 big
Go to item page Right Arrow Icon of Right Arrow

Sound Extreme by ECOXGEAR SEI-AMPEV30011 with NVX 8 Gauge Amp Kit

300W RMS EV Series Class-D Monoblock High Definition Marine Amplifier

• 300 watts x 1 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable Monoblock Amplifier
• Operating Voltage: 43V to 82V
• Marine-grade sealed die-cast aluminum chassis
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

59
Was $395.98 Details
$299.99

In stock

Only 1 Left!

Add to Cart

• 300 watts x 1 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable Monoblock Amplifier
• Operating Voltage: 43V to 82V
• Marine-grade sealed die-cast aluminum chassis
• Includes Amplifier Wiring Kit

Sound Extreme by ECOXGEAR SEI-AMPEV30041 with NVX 8 Gauge Amp Kit

300W RMS EV Series Class-D 4-Channel Amplifier

EV30041_XKIT84 big
Go to item page Right Arrow Icon of Right Arrow

Sound Extreme by ECOXGEAR SEI-AMPEV30041 with NVX 8 Gauge Amp Kit

300W RMS EV Series Class-D 4-Channel Amplifier

• 74 watts x 4 channel @ 4 ohm
• Bridged: 150 watts x 2 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable 4-Channel-Channel Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

38
Was $507.98 Details
$399.99

In stock

Only 1 Left!

Add to Cart

• 74 watts x 4 channel @ 4 ohm
• Bridged: 150 watts x 2 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable 4-Channel-Channel Amplifier
• Includes Amplifier Wiring Kit

Sound Extreme by ECOXGEAR SEI-AMP30011 with NVX 8 Gauge Amp Kit

300W RMS Class-D Monoblock High Definition Marine Amplifier

A30011_XKIT82 big
Go to item page Right Arrow Icon of Right Arrow

Sound Extreme by ECOXGEAR SEI-AMP30011 with NVX 8 Gauge Amp Kit

300W RMS Class-D Monoblock High Definition Marine Amplifier

• 300 watts x 1 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable Monoblock Amplifier
• Marine-grade sealed die-cast aluminum chassis
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

59
Was $395.98 Details
$299.99

In stock

Only 2 Left!

Add to Cart

• 300 watts x 1 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 4 ohm Stable Monoblock Amplifier
• Marine-grade sealed die-cast aluminum chassis
• Includes Amplifier Wiring Kit

Wet Sounds SYN-DX 2 + NVX 4 Gauge Marine Amp Kit

750W RMS SYN-DX Series Bridgeable Full Range 2-Channel Class D Marine Amplifier (WetSounds)

SYN-DX 2, XKIT42 big
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds SYN-DX 2 + NVX 4 Gauge Marine Amp Kit

750W RMS SYN-DX Series Bridgeable Full Range 2-Channel Class D Marine Amplifier (WetSounds)

• 200 watts x 2 chan. @ 4 Ohm
• 375 watts x 2 chan. @ 2 Ohm
• 750 watts x 1 chan. @ 4 Ohm
• Total power output: 750 watts RMS
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
• Fuse Rating: 30 A x 3

Save 10% Off Package Deals at Checkout!
shipping truck icon
FREE 1-day shipping to OH. Get it Wed, Nov. 19

empty

121
Was $1243.98 Details
$1,176.98

In stock

Only 1 Left!

Add to Cart

• 200 watts x 2 chan. @ 4 Ohm
• 375 watts x 2 chan. @ 2 Ohm
• 750 watts x 1 chan. @ 4 Ohm
• Total power output: 750 watts RMS
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
• Fuse Rating: 30 A x 3

Wet Sounds STX Micro 1 with NVX 8 Gauge Amp Kit

600W RMS Class-D 1-Ohm Stable Monoblock Compact Amplifier

STXMICRO1_XKIT82 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds STX Micro 1 with NVX 8 Gauge Amp Kit

600W RMS Class-D 1-Ohm Stable Monoblock Compact Amplifier

• 250 Watts RMS x 1 @ 4 ohm
• 420 Watts RMS x 1 @ 2 ohm
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 600 Watts
• Frequency Response: 10 - 250Hz
• Dimensions: 4"W x 9.25"L x 1.5"H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

59
Was $525.98 Details
$489.98
Add to Cart

• 250 Watts RMS x 1 @ 4 ohm
• 420 Watts RMS x 1 @ 2 ohm
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 600 Watts
• Frequency Response: 10 - 250Hz
• Dimensions: 4"W x 9.25"L x 1.5"H
• Includes Amplifier Wiring Kit

Wet Sounds SDX2 with NVX 4 Gauge Amp Kit

1250 Watt Sinister Series Full Range 2-Channel Class D Amplifier (WetSounds)

SDX2_XKIT42 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds SDX2 with NVX 4 Gauge Amp Kit

1250 Watt Sinister Series Full Range 2-Channel Class D Amplifier (WetSounds)

• RMS: 400W x 2 @ 4 ohm, 620W x 2 @ 2 ohm, Bridged: 1250W x 1 @ 4 ohm
• Total RMS Power: 1250 watts
• Wet Sounds unique transformer
• Advanced Intelligent Microprocessor Control
• Top mounted crossover controls
• Dimensions: 9.82" W x 13.50" L x 2.70" H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

120
Was $1773.98 Details
$1,712.48
Add to Cart

• RMS: 400W x 2 @ 4 ohm, 620W x 2 @ 2 ohm, Bridged: 1250W x 1 @ 4 ohm
• Total RMS Power: 1250 watts
• Wet Sounds unique transformer
• Advanced Intelligent Microprocessor Control
• Top mounted crossover controls
• Dimensions: 9.82" W x 13.50" L x 2.70" H
• Includes Amplifier Wiring Kit

Wet Sounds Sinister-SDX2500 with NVX 1/0 Gauge Amp Kit

2500W RMS Class D Monoblock Subwoofer Amplifier

SINISTERSDX2500_XKIT02 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds Sinister-SDX2500 with NVX 1/0 Gauge Amp Kit

2500W RMS Class D Monoblock Subwoofer Amplifier

• RMS: 1000 watts x 1 chan. @ 4 Ohm <1.0% THD, 1700 watts x 1 chan. @ 2 Ohm <1.0% THD, 2500 watts x 1 chan. @ 4 Ohm <1.0% THD
• Total power output: 2500 watts RMS
• MAXED Power Supply
• Advanced Intelligent Microprocessor Control
• Includes Amplifier Wiring Kit
• Overvoltage/Undervoltage Protection
• DC Offset & Speaker Short Protection
• Dimensions: 10.25" W x 22.125" L x 3.0" H

Save 10% Off Package Deals at Checkout!

empty

39
Was $2327.98 Details
$2,099.99
Add to Cart

• RMS: 1000 watts x 1 chan. @ 4 Ohm <1.0% THD, 1700 watts x 1 chan. @ 2 Ohm <1.0% THD, 2500 watts x 1 chan. @ 4 Ohm <1.0% THD
• Total power output: 2500 watts RMS
• MAXED Power Supply
• Advanced Intelligent Microprocessor Control
• Includes Amplifier Wiring Kit
• Overvoltage/Undervoltage Protection
• DC Offset & Speaker Short Protection
• Dimensions: 10.25" W x 22.125" L x 3.0" H

Clarion XC2110 with Belva 8 Gauge Amp Kit

400W Peak Ultra Compact Monoblock XC Series Micro Class D Marine Amplifier

XC2110_BAK82 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Clarion XC2110 with Belva 8 Gauge Amp Kit

400W Peak Ultra Compact Monoblock XC Series Micro Class D Marine Amplifier

• 200 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 400 Watts
• CEA-2006 Compliant
• 0 to +12 dB bass boost at 50 Hz
• Nickel heat-sink for extreme heat dissipation
• 7.85"W x 3.23"L x 1.54"H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

97
Was $349.98 Details
$229.99
Add to Cart

• 200 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 400 Watts
• CEA-2006 Compliant
• 0 to +12 dB bass boost at 50 Hz
• Nickel heat-sink for extreme heat dissipation
• 7.85"W x 3.23"L x 1.54"H
• Includes Amplifier Wiring Kit

Wet Sounds SDX-6 with NVX 4 Gauge Amp Kit

1755 Watt Sinister Series Full Range 6-Channel Class D Amplifier (WetSounds)

SDX6_XKIT46 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds SDX-6 with NVX 4 Gauge Amp Kit

1755 Watt Sinister Series Full Range 6-Channel Class D Amplifier (WetSounds)

• RMS: 185W x 6 @ 4 ohm, 290W x 6 @ 2 ohm, Bridged: 585W x 3 @ 4 ohm
• Total RMS Power: 1755 watts
• Wet Sounds Unique Transformer
• Advanced Intelligent Microprocessor Control
• Top Mounted Crossover Controls
• Dimensions: 13" W x 19" L x 5" H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

44
Was $2079.98 Details
$1,899.99
Add to Cart

• RMS: 185W x 6 @ 4 ohm, 290W x 6 @ 2 ohm, Bridged: 585W x 3 @ 4 ohm
• Total RMS Power: 1755 watts
• Wet Sounds Unique Transformer
• Advanced Intelligent Microprocessor Control
• Top Mounted Crossover Controls
• Dimensions: 13" W x 19" L x 5" H
• Includes Amplifier Wiring Kit

Wet Sounds SYN-DX 6 with NVX 4 Gauge Amp Kit

600W RMS SYN-DX Series Bridgeable Full Range 6-Channel Class D Marine Amplifier (WetSounds)

SYNDX6_XKIT46 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds SYN-DX 6 with NVX 4 Gauge Amp Kit

600W RMS SYN-DX Series Bridgeable Full Range 6-Channel Class D Marine Amplifier (WetSounds)

• Class-D 2-Ohm Stable 6-Channel Amplifier
• Total power output: 1400 watts RMS
• Remote Turn-on
• Conformal coated PCB
• Variable high-pass filter: 50 - 250 Hz, 24 dB/octave
• Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
• Fuse Rating: 30 A x 3
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

44
Was $1679.98 Details
$1,597.48
Add to Cart

• Class-D 2-Ohm Stable 6-Channel Amplifier
• Total power output: 1400 watts RMS
• Remote Turn-on
• Conformal coated PCB
• Variable high-pass filter: 50 - 250 Hz, 24 dB/octave
• Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
• Fuse Rating: 30 A x 3
• Includes Amplifier Wiring Kit

Wet Sounds SYN-DX 4 with NVX 4 Gauge Amp Kit

800W RMS DX-Series Bridgeable Full-Range 4-Channel Marine Amplifier

SYNDX4_XKIT44 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds SYN-DX 4 with NVX 4 Gauge Amp Kit

800W RMS DX-Series Bridgeable Full-Range 4-Channel Marine Amplifier

• 125 Watts RMS x 4 @ 4 ohm
• 200 Watts RMS x 4 @ 2 ohm
• 400 Watts RMS x 2 @ 4 ohm
• Total RMS Power: 800 Watts
• Frequency Response: 20 - 20000 Hz
• Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Fuse Rating: 30 A x 2
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

79
Was $1355.98 Details
$1,289.98
Add to Cart

• 125 Watts RMS x 4 @ 4 ohm
• 200 Watts RMS x 4 @ 2 ohm
• 400 Watts RMS x 2 @ 4 ohm
• Total RMS Power: 800 Watts
• Frequency Response: 20 - 20000 Hz
• Variable high-pass filter: 50 - 250 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Fuse Rating: 30 A x 2
• Includes Amplifier Wiring Kit

Wet Sounds HTX-4 with NVX 4 Gauge Amp Kit

600W RMS 4-Channel HTX Series Class D Full-Range Marine Amplifier (WetSounds)

HTX4_XKIT44 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds HTX-4 with NVX 4 Gauge Amp Kit

600W RMS 4-Channel HTX Series Class D Full-Range Marine Amplifier (WetSounds)

• 100 Watts RMS x 4 @ 4 ohm
• 150 Watts RMS x 4 @ 2 ohm
• 300 Watts RMS x 2 @ 4 ohm, Bridged
• Total Peak Power: 600 Watts RMS
• CEA-2006 Compliant
• Removable crossover/level control cover
• Conformal coated PCB boards
• 4, 3 or 2 channel operation
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

80
Was $1055.98 Details
$799.99
Notify Me

• 100 Watts RMS x 4 @ 4 ohm
• 150 Watts RMS x 4 @ 2 ohm
• 300 Watts RMS x 2 @ 4 ohm, Bridged
• Total Peak Power: 600 Watts RMS
• CEA-2006 Compliant
• Removable crossover/level control cover
• Conformal coated PCB boards
• 4, 3 or 2 channel operation
• Includes Amplifier Wiring Kit

Wet Sounds SDX4 with NVX 4 Gauge Amp Kit

1370 Watt Sinister Series Full Range 4-Channel Class D Amplifier (WetSounds)

SDX4_XKIT44 big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Wet Sounds SDX4 with NVX 4 Gauge Amp Kit

1370 Watt Sinister Series Full Range 4-Channel Class D Amplifier (WetSounds)

• RMS: 185W x 4 @ 4 ohm, 340W x 4 @ 2 ohm, Bridged: 685W x 2 @ 4 ohm
• Total RMS Power: 1370 watts
• Wet Sounds unique transformer
• Advanced Intelligent Microprocessor Control
• Top mounted crossover controls
• Dimensions: 9.82" W x 13.50" L x 2.70" H
• Includes Amplifier Wiring Kit

Save 10% Off Package Deals at Checkout!

empty

79
Was $1955.98 Details
$1,889.98
Add to Cart

• RMS: 185W x 4 @ 4 ohm, 340W x 4 @ 2 ohm, Bridged: 685W x 2 @ 4 ohm
• Total RMS Power: 1370 watts
• Wet Sounds unique transformer
• Advanced Intelligent Microprocessor Control
• Top mounted crossover controls
• Dimensions: 9.82" W x 13.50" L x 2.70" H
• Includes Amplifier Wiring Kit

 
    Clear all

    All About Car Amplifier Packages & Bundles

    Amplifier Packages and Bundles Information

    Driving while listening to a superior audio system is one of life's great joys. No matter what type of car you have, upgrading the factory stereo with aftermarket stereo and speaker equipment will have you rocking in your seat and enjoying the drive, not just surviving.

    Most car manufacturers come with stock sound systems that lack power and quality. The most common way people upgrade their car stereos is by installing a new head unit.  This is the in-dash component that allows you to control everything from CDs, AM/FM radio, communication and sometimes vehicle climate control. 

    Amplifiers and subwoofers are necessary to increase the power of the audio system and maintain music fidelity. The amplifier that comes in most head units cannot power upgraded speakers. To get these features while keeping enough energy flowing to the speakers, an amplifier will be needed to ensure each component is getting enough power. Especially if you want to add an aftermarket subwoofer or any specialized speaker. 

     A set of subs increases the base output. Most people associate these with loud music that rattles the bumper – which subwoofers are more than capable of generating. Even so, subs were created to make low frequency sounds that mid-range and factory speakers can’t. You can crank up the bass for a chest thumping experience, or to bring new depth to any musical genre. 

    Replacing the main speakers with excellent tweeters provides the same boost in power and quality for high frequencies.

    Coordinating all the different components necessary to upgrade your car stereo can be tedious. This category is dedicated to packages Sonic Electronix has created to match your desired amplifier and subwoofer, subwoofer and its enclosure, head units and backup cameras, and so on. There are also premium car audio kits that come with a new stereo, subwoofer and speaker box, front speakers, amp, and all the necessary wiring. 

    Sonic Electronix Learning Center: Quick Guide to Car Audio.

    ADVERTISEMENT
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage

    Add vehicle
    2 | Make
    3 | Model
    Where to find vehicle info | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    2 | Make
    3 | Model
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner’s manual
    • Vehicle’s insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver’s side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo