Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Kicker Store
  3. Discontinued Kicker Car Audio & Electronics
  4. Discontinued Kicker Car Amplifiers
  5. Discontinued Kicker All Car Amplifiers

Discontinued All Kicker Car Amplifiers

Power your sound with Kicker's extensive selection of car amplifiers.

Filters
Kicker ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Kicker 46CXA8001 600 Watt RMS Monoblock Amp One Channel Power Amplifier (2 Pack)

Kicker 43CXA6001 600 Watt RMS Monoblock Amp One Channel Power Amplifier (2 Pack)

46CXA8001T 2 Pack big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 46CXA8001 600 Watt RMS Monoblock Amp One Channel Power Amplifier (2 Pack)

Kicker 43CXA6001 600 Watt RMS Monoblock Amp One Channel Power Amplifier (2 Pack)

• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

19

• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

Kicker CX300.1 (12CX300.1)

600W Max CX Series Class D Monoblock Car Amplifier

CX300.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CX300.1 (12CX300.1)

600W Max CX Series Class D Monoblock Car Amplifier

• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

11

• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Kicker KEY180.4 (45KEY1804) Key Smart Amplifier

180W RMS 4-Channel Full-Range Car Amplifier with Automatic EQ, DSP, Time Alignment

KEY180.4 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KEY180.4 (45KEY1804) Key Smart Amplifier

180W RMS 4-Channel Full-Range Car Amplifier with Automatic EQ, DSP, Time Alignment

• 45 Watts RMS x 4 @ 4 ohm
• Automatic Tuning
• CEA-2006 Compliant
• All Tuning Performed with Included Microphone
• Improves Sound at the Touch of a Button
• Dimensions: 7-3/8" W x 2-3/4" L x 1-11/16" H

5

• 45 Watts RMS x 4 @ 4 ohm
• Automatic Tuning
• CEA-2006 Compliant
• All Tuning Performed with Included Microphone
• Improves Sound at the Touch of a Button
• Dimensions: 7-3/8" W x 2-3/4" L x 1-11/16" H

Kicker CX300.1 (12CX300.1) LIKE NEW DAMAGED PACKAGING

600W Max CX Series Class D Monoblock Car Amplifier

CX300.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CX300.1 (12CX300.1) LIKE NEW DAMAGED PACKAGING

600W Max CX Series Class D Monoblock Car Amplifier

Like new Damaged Package
• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Like new Damaged Package
• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total Peak Power: 600W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Kicker DXA250.4 (43DXA2504)

500W Max (250W RMS) DX-Series Full Range 4 Channel Amplifier

43DXA2504 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker DXA250.4 (43DXA2504)

500W Max (250W RMS) DX-Series Full Range 4 Channel Amplifier

• RMS Power: 30W x 4 @ 4 ohm, 60W x 4 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 12-7/16" W x 7-3/16" D x 2-3/8" H

2

• RMS Power: 30W x 4 @ 4 ohm, 60W x 4 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 12-7/16" W x 7-3/16" D x 2-3/8" H

Kicker CX600.1 (12CX600.1)

600W RMS, Class D Mono Block CX Series Car Amplifier

CX600.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CX600.1 (12CX600.1)

600W RMS, Class D Mono Block CX Series Car Amplifier

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total Peak Power: 1200W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Promo Savings Icon
10

• RMS: 300W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total Peak Power: 1200W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 8-1/8"D x 2-3/8"H

Kicker CXA660.5

660W RMS Class AB CX-Series 5 Channel Car Amplifier

CXA660.5 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CXA660.5

660W RMS Class AB CX-Series 5 Channel Car Amplifier

• 65 watts x 4 channel + 150 watts x 1 channel @ 4 ohm
• 90 watts x 4 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 660 watts
• Class A/B 2 ohm Stable 5-Channel Amplifier

VIP Star Icon

VIP Product Get $45.00 in rewards to spend later

• 65 watts x 4 channel + 150 watts x 1 channel @ 4 ohm
• 90 watts x 4 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 660 watts
• Class A/B 2 ohm Stable 5-Channel Amplifier

Kicker 43CXA3001 CX300.1 Amplifier + Amplifier Remote

600W Peak (300W RMS) Monoblock Class D Subwoofer Car Amplifier Package

46CXARC,46CXA4001T big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 43CXA3001 CX300.1 Amplifier + Amplifier Remote

600W Peak (300W RMS) Monoblock Class D Subwoofer Car Amplifier Package


• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

1


• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

Kicker CXA1200.1 Amplifier (43CXA12001)

2400W Peak (1200W RMS) Monoblock Class-D Subwoofer Car Amplifier

43CXA12001 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CXA1200.1 Amplifier (43CXA12001)

2400W Peak (1200W RMS) Monoblock Class-D Subwoofer Car Amplifier

• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

6

• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

Kicker ZX700.5

700W RMS, 5-Channel ZX Series Amplifier

11ZX7005 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker ZX700.5

700W RMS, 5-Channel ZX Series Amplifier

• Full-Range RMS: 70W x 4 @ 4 ohm, 85W x 4 @ 2 ohm
• Subwoofer RMS: 210W x 1 @ 4 ohm, 420W x 1 @ 2 ohm
• CEA-2006 Compliant
• Balanced Differential Inputs
• Variable Bass Boost: 0 - 18 dB
• Dimensions: 20"L x 9-5/8"W x 2-1/8"H

9

• Full-Range RMS: 70W x 4 @ 4 ohm, 85W x 4 @ 2 ohm
• Subwoofer RMS: 210W x 1 @ 4 ohm, 420W x 1 @ 2 ohm
• CEA-2006 Compliant
• Balanced Differential Inputs
• Variable Bass Boost: 0 - 18 dB
• Dimensions: 20"L x 9-5/8"W x 2-1/8"H

Kicker ZX300.1 (11ZX300.1)

300W RMS Monoblock ZX Series Class A/B Amplifier

11ZX300.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker ZX300.1 (11ZX300.1)

300W RMS Monoblock ZX Series Class A/B Amplifier

• RMS: 150W x 1 @ 4 ohm, 2 ohm 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB at 40 Hz
• Optional Vinyl Skins For Personalization
• Dimensions: 13-1/2"L x 9-5/8"W x 2-1/8"H

11

• RMS: 150W x 1 @ 4 ohm, 2 ohm 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB at 40 Hz
• Optional Vinyl Skins For Personalization
• Dimensions: 13-1/2"L x 9-5/8"W x 2-1/8"H

Kicker CX1200.1 (12CX1200.1)

1200W RMS, Class D Mono Block CX Series Car Amplifier

CX1200.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CX1200.1 (12CX1200.1)

1200W RMS, Class D Mono Block CX Series Car Amplifier

• RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total Peak Power: 2400W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 12-1/16"D x 2-3/8"H

17

• RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total Peak Power: 2400W
• CEA-2006 Compliant
• Bass Boost 0-12 dB at 40 Hz
• Vertical Mounting Option
• Dimensions: 7-3/16"W x 12-1/16"D x 2-3/8"H

Kicker CXA300.4 (43CXA3004) Open Box

600 Watt Peak (300W RMS) CX Series 4-Channel Bridgeable Class D Car Amplifier

43CXA3004 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CXA300.4 (43CXA3004) Open Box

600 Watt Peak (300W RMS) CX Series 4-Channel Bridgeable Class D Car Amplifier

• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 12-7/16"L x 2-3/8"H

• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 12-7/16"L x 2-3/8"H

Kicker ZX750.1 (11ZX750.1)

750W RMS Class D Monoblock ZX Series Amplifier

11ZX750.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker ZX750.1 (11ZX750.1)

750W RMS Class D Monoblock ZX Series Amplifier

• RMS: 375W x 1 @ 4 ohm, 750W x 1 @ 2 ohm
• Total RMS Power: 750W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB at 40 Hz
• Optional Vinyl Skins For Personalization
• Dimensions: 14-11/16"L x 9-5/8"W x 2-1/8"H

17

• RMS: 375W x 1 @ 4 ohm, 750W x 1 @ 2 ohm
• Total RMS Power: 750W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB at 40 Hz
• Optional Vinyl Skins For Personalization
• Dimensions: 14-11/16"L x 9-5/8"W x 2-1/8"H

Kicker DX300.2 (11DX300.2)

300W RMS 2-Channel DX Series Amplifier (DX3002)

11DX300.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker DX300.2 (11DX300.2)

300W RMS 2-Channel DX Series Amplifier (DX3002)

• DX Series 2-Channel Class D Car Amplifier
• 150 Watts x 2-Channel @ 2 Ohm
• 75 Watts x 2-Channel @ 4 Ohm
• 300 Watts x 1-Channel @ 4 Ohm
• Muting Circuit
• 3 Automatic Turn-On Modes
• Balanced Differential Inputs

3

• DX Series 2-Channel Class D Car Amplifier
• 150 Watts x 2-Channel @ 2 Ohm
• 75 Watts x 2-Channel @ 4 Ohm
• 300 Watts x 1-Channel @ 4 Ohm
• Muting Circuit
• 3 Automatic Turn-On Modes
• Balanced Differential Inputs

Kicker DX250.1 (11DX250.1)

250W RMS, Monoblock Class D DX Series Amplifier

11DX250.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker DX250.1 (11DX250.1)

250W RMS, Monoblock Class D DX Series Amplifier

• RMS: 140W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total RMS Power: 250W
• CEA-2006 Compliant
• Bass Boost 0-12 dB
• Balanced Differential Inputs for Noise Elimination
• Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H

8

• RMS: 140W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total RMS Power: 250W
• CEA-2006 Compliant
• Bass Boost 0-12 dB
• Balanced Differential Inputs for Noise Elimination
• Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H

Kicker KXA2400.1 (44KXA24001)

2400W RMS KXA Class-D Monoblock 1-Ohm Stable Amplifier with Remote Level Control

44KXA24001 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KXA2400.1 (44KXA24001)

2400W RMS KXA Class-D Monoblock 1-Ohm Stable Amplifier with Remote Level Control

• 1200 Watts RMS x 1 @ 4 ohm
•2400 Watts RMS x 1 @ 2 ohm
• 2400 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• SHOCwave Bass Restoration Processor
• Aluminum Heatsink
• Dimensions: 8-5/16" W x 15-1/2" L x 2-1/8" H

2

• 1200 Watts RMS x 1 @ 4 ohm
•2400 Watts RMS x 1 @ 2 ohm
• 2400 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• SHOCwave Bass Restoration Processor
• Aluminum Heatsink
• Dimensions: 8-5/16" W x 15-1/2" L x 2-1/8" H

Kicker DX250.1 (11DX250.1) - Factory Refurbished

250W RMS, Monoblock Class D DX Series Amplifier

11DX250.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker DX250.1 (11DX250.1) - Factory Refurbished

250W RMS, Monoblock Class D DX Series Amplifier

• RMS: 140W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total RMS Power: 250W
• CEA-2006 Compliant
• Bass Boost 0-12 dB
• Balanced Differential Inputs for Noise Elimination
• Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H

1

• RMS: 140W x 1 @ 4 ohm, 250W x 1 @ 2 ohm
• Total RMS Power: 250W
• CEA-2006 Compliant
• Bass Boost 0-12 dB
• Balanced Differential Inputs for Noise Elimination
• Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H

Kicker KX200.2 (40KX200.2)

200W RMS KX Series 2-Channel Class D-IC Stereo Bridgeable Car Power Amplifier (KX2002)

KX200.2-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX200.2 (40KX200.2)

200W RMS KX Series 2-Channel Class D-IC Stereo Bridgeable Car Power Amplifier (KX2002)

• 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• Bridged: 200W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• Single Channel Operation
• 4 Gauge Power and Ground Inputs
• Stylish Magnetic Panel Covers Tuning Options for Clean Install

1

• 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• Bridged: 200W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• Single Channel Operation
• 4 Gauge Power and Ground Inputs
• Stylish Magnetic Panel Covers Tuning Options for Clean Install

Kicker ZX500.1 (11ZX500.1)

500W RMS Class D Monoblock ZX Series Amplifier

11ZX5001 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker ZX500.1 (11ZX500.1)

500W RMS Class D Monoblock ZX Series Amplifier

• RMS: 250W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB at 40 Hz
• Optional Vinyl Skins For Personalization
• Dimensions: 12"L x 9-5/8"W x 2-1/8"H

4

• RMS: 250W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB at 40 Hz
• Optional Vinyl Skins For Personalization
• Dimensions: 12"L x 9-5/8"W x 2-1/8"H

1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    Kicker All Car Amplifiers Information

    All car amplifiers from Kicker are built from highly durable materials and with quality in mind. With various power ratings and max power output, Kicker has a wide array of options to suit your system. When thinking of car amplifiers, think Kicker.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2011 Mitsubishi Galant

    1987 Buick Electra

    2021 Toyota RAV4

    2013 Chrysler 200

    1995 Eagle Vision

    2019 Volkswagen Beetle

    1971 Mercury Capri

    2013 Audi A5

    2000 Lotus Esprit

    1998 Mercury Sable

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2011 Galant
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo