Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Infinity Store
  3. Discontinued Infinity Car Audio & Electronics
  4. Discontinued Infinity Car Amplifiers
  5. Discontinued Infinity Monoblock Amplifiers

Discontinued Infinity Monoblock Amplifiers

Deep, impactful bass is the hallmark of Infinity's Monoblock Amplifiers.

Match Amps to Subs
Filters
Infinity ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Infinity Kappa One K (KAPPAONEKAM)

2600W Peak (1000W RMS) Kappa Series Class-D Monoblock Amplifier with Bass Remote

Kappa One K-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Kappa One K (KAPPAONEKAM)

2600W Peak (1000W RMS) Kappa Series Class-D Monoblock Amplifier with Bass Remote

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

6

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

Infinity Primus 3000a

600W Peak (300W RMS) Primus Series Class-D Monoblock Amplifier

PRIMUS3000AAM big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Primus 3000a

600W Peak (300W RMS) Primus Series Class-D Monoblock Amplifier

• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

Infinity MARINE M6001A

600W RMS Reference Series Class-D Monoblock Amplifier with Bass Remote

MARINEM6001A big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity MARINE M6001A

600W RMS Reference Series Class-D Monoblock Amplifier with Bass Remote

• 350 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 350 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier

Infinity Kappa K1000 Monoblock Amplifier

2600W Peak (700W RMS) High Performance Kappa Series Class-D Monoblock 2-Ohm Stable Car Subwoofer Amplifier

K1000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Kappa K1000 Monoblock Amplifier

2600W Peak (700W RMS) High Performance Kappa Series Class-D Monoblock 2-Ohm Stable Car Subwoofer Amplifier

• 700 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2600 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

• 700 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2600 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

Infinity Kappa K600

1500W Peak (600W RMS) High Performance Kappa Series Class-D Monoblock 2-Ohm Stable Car Subwoofer Amplifier

K600 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Kappa K600

1500W Peak (600W RMS) High Performance Kappa Series Class-D Monoblock 2-Ohm Stable Car Subwoofer Amplifier

• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

Infinity Reference 551A (REF-551A)

1300W Max (550W RMS) Reference Series Class-D Monoblock 2 Ohm Stable Amplifier with High Level Input Adapters Included

REF-551AAM big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Reference 551A (REF-551A)

1300W Max (550W RMS) Reference Series Class-D Monoblock 2 Ohm Stable Amplifier with High Level Input Adapters Included

• 370 Watts RMS x 1 @ 4 ohm
• 550 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1300 Watts
• Variable Bass Boost: 0 to +9 dB
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Frequency Response: 32 - 320 Hz

VIP Star Icon

VIP Product Get $20.00 in rewards to spend later

1

• 370 Watts RMS x 1 @ 4 ohm
• 550 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1300 Watts
• Variable Bass Boost: 0 to +9 dB
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Frequency Response: 32 - 320 Hz

Infinity Reference 1300a

342W Max, Reference Series Class D Monoblock Amplifier

1300a big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Reference 1300a

342W Max, Reference Series Class D Monoblock Amplifier

• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/4"L x 9"W x 2-11/16H

13

• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/4"L x 9"W x 2-11/16H

Infinity Reference 1211a

Class D Monoblock Amplifier (REF1211A)

1211A big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Reference 1211a

Class D Monoblock Amplifier (REF1211A)

1516 watts max • Supports remote subwoofer control • • MOSFET power supply • Preamp outputs • Dynamic Base Optimizer

6

1516 watts max • Supports remote subwoofer control • • MOSFET power supply • Preamp outputs • Dynamic Base Optimizer

Infinity Kappa One 6 (KAPPAONE6AM)

1500W Peak (600W RMS) Class D Kappa Series Monoblock Car Amplifier with Bass Remote

Kappa One 6-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Kappa One 6 (KAPPAONE6AM)

1500W Peak (600W RMS) Class D Kappa Series Monoblock Car Amplifier with Bass Remote

• 380 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier

6

• 380 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier

Infinity KAPPA ONE

1600W Max, Kappa Series Class D Mono Subwoofer Amplifier

KAPPA-ONE big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity KAPPA ONE

1600W Max, Kappa Series Class D Mono Subwoofer Amplifier

• RMS: 500 x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Bass Boost: 0 - 12 dB
• Non-Stop Thermal Protection
• Dimensions: 13"L x 7-1/16W x 1-3/4H

15

• RMS: 500 x 1 @ 4 ohm, 800W x 1 @ 2 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Bass Boost: 0 - 12 dB
• Non-Stop Thermal Protection
• Dimensions: 13"L x 7-1/16W x 1-3/4H

Infinity Reference 551A

1300W Max (550W RMS) Reference Series Class-D Monoblock 2 Ohm Stable Amplifier with High Level Input Adapters Included

REF-551AAM big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Reference 551A

1300W Max (550W RMS) Reference Series Class-D Monoblock 2 Ohm Stable Amplifier with High Level Input Adapters Included

• 370 Watts RMS x 1 @ 4 ohm
• 550 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1300 Watts
• Variable Bass Boost: 0 to +9 dB
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Frequency Response: 32 - 320 Hz

1

• 370 Watts RMS x 1 @ 4 ohm
• 550 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1300 Watts
• Variable Bass Boost: 0 to +9 dB
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Frequency Response: 32 - 320 Hz

Infinity Kappa K600 Amplifier + Alpine 12" Subwoofer + Free Amp Kit

Infinity Kappa 600W RMS Class-D Monoblock Amplifier + Alpine R-W12D2 Dual 2-Ohm Subwoofer + Belva Bak44bl (Blue)

K600, RW12D2, BAK44BL big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Kappa K600 Amplifier + Alpine 12" Subwoofer + Free Amp Kit

Infinity Kappa 600W RMS Class-D Monoblock Amplifier + Alpine R-W12D2 Dual 2-Ohm Subwoofer + Belva Bak44bl (Blue)

• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

52

• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

Infinity Kappa K600 Amplifier + Alpine 12" Subwoofer + Free Amp Kit

600W RMS Infinity Kappa Monoblock 2-Ohm Stable Amplifier + Alpine R-W12D2 Dual 2-Ohm Subwoofer + Belva Bak44

K600, RW12D2, BAK44 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Kappa K600 Amplifier + Alpine 12" Subwoofer + Free Amp Kit

600W RMS Infinity Kappa Monoblock 2-Ohm Stable Amplifier + Alpine R-W12D2 Dual 2-Ohm Subwoofer + Belva Bak44

• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

85

• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

Infinity 1300a Amp + (2) JBL 10" Subs + High-End Amp Kit

Combo Package with Reference Amplifier + JBL 10" Subs and an Amp Kit

1300a + 2 CS1014 + XKIT82 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity 1300a Amp + (2) JBL 10" Subs + High-End Amp Kit

Combo Package with Reference Amplifier + JBL 10" Subs and an Amp Kit

• Includes amp, subs and a wiring kit -- Everything but a sub box!
• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/4"L x 9"W x 2-11/16H

• Includes amp, subs and a wiring kit -- Everything but a sub box!
• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/4"L x 9"W x 2-11/16H

Infinity 611A

Class D Monoblock Amplifier

611a big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity 611A

Class D Monoblock Amplifier

Infinity Systems 1-Channel Class D Car Amplifier • 450W x 1 chan. @ 4 ohm • 650W x 1 chan. Max • Tuned Bass EQ (0-12 dB bass boost at 20-80 Hz) • Preamp RCA outputs

1

Infinity Systems 1-Channel Class D Car Amplifier • 450W x 1 chan. @ 4 ohm • 650W x 1 chan. Max • Tuned Bass EQ (0-12 dB bass boost at 20-80 Hz) • Preamp RCA outputs

Infinity Reference 311a

347W Max, Class A/B Monoblock Amplifier (REF311A)

311A big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Reference 311a

347W Max, Class A/B Monoblock Amplifier (REF311A)

Infinity Reference Class AB Monoblock Amplifier • Max Power: 347W x 1 chan. • RMS: 312W x 1 chan. @ 2 ohm • RMS: 116W x 1 chan. @ 4 ohm • 0-12 dB Bass Boost

Infinity Reference Class AB Monoblock Amplifier • Max Power: 347W x 1 chan. • RMS: 312W x 1 chan. @ 2 ohm • RMS: 116W x 1 chan. @ 4 ohm • 0-12 dB Bass Boost

EXCLUSIVE

Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

REF1200S 1000W 12" Shallow Mount Subwoofer + KX200.2 KX Series 2-Ch Amp + XKIT82 2-Ch 8G Amp Install Kit + 12SME 12" Sub Enclosure

REF1200S_KX200.2_XKIT82_12SME big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Subwoofer + Kicker Amplifier Upgrade w/ Sub Enclosure

REF1200S 1000W 12" Shallow Mount Subwoofer + KX200.2 KX Series 2-Ch Amp + XKIT82 2-Ch 8G Amp Install Kit + 12SME 12" Sub Enclosure

• Subwoofer: RMS Power: 250W
• Amplifier: 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 8 Gauge 2-Channel Complete Amplifier Installation Kit
• 12" Single Sealed Ultra Slim Series Subwoofer Enclosure

• Subwoofer: RMS Power: 250W
• Amplifier: 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 8 Gauge 2-Channel Complete Amplifier Installation Kit
• 12" Single Sealed Ultra Slim Series Subwoofer Enclosure

Infinity Reference 1600A

894W Max, Reference Series Class D Monoblock Amplifier

1600A big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity Reference 1600A

894W Max, Reference Series Class D Monoblock Amplifier

• RMS: 400W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total RMS Power: 600W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/16"L x 9"W x 2-11/16H

24

• RMS: 400W x 1 @ 4 ohm, 600W x 1 @ 2 ohm
• Total RMS Power: 600W
• CEA-2006 Compliant
• Bass Boost: 0-6 dB
• Class D Circuitry
• Dimensions: 14-3/16"L x 9"W x 2-11/16H

Infinity K600 Kappa Series Amplifier (Open Box)

1500W Peak (600W RMS) High Performance Kappa Series Class-D Monoblock 2-Ohm Stable Car Subwoofer Amplifier

K600 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity K600 Kappa Series Amplifier (Open Box)

1500W Peak (600W RMS) High Performance Kappa Series Class-D Monoblock 2-Ohm Stable Car Subwoofer Amplifier

• Item Condition: Like New Open Box
• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

• Item Condition: Like New Open Box
• 380 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 1500 Watts
• Variable low-pass filter: 32 - 320 Hz
• Sleek, brushed steel industrial design
• Upgradable Firmware via the microUSB port
• Speaker-level (high-level) inputs

Infinity 610a Reference Series

610A big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Infinity 610a Reference Series

657 watts RMS x 1 at 2 ohm • Low-pass filter • Dynamic Bass Optimization circuit • preamp outputs

1

657 watts RMS x 1 at 2 ohm • Low-pass filter • Dynamic Bass Optimization circuit • preamp outputs

1 2 Next

Items per page: 20 40 60

    Clear all

    Infinity Monoblock Amplifiers Information

    The Infinity monoblock amplifiers are designed for efficient power output. These amps take up little space and feature high quality platinum finished connections, and solid power ratings. You won't be disappointed with your Infinity monoblock amplifier for your vehicle's needs.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1987 Ford E Series

    1981 Cadillac Eldorado

    1991 Mitsubishi Eclipse

    1990 Nissan Sentra

    2015 Tesla Model S

    2015 Jaguar XK

    2001 GMC Sonoma

    2015 Lexus IS250C

    2024 Audi e-tron Sportback

    1995 Eagle Vision

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    2 | Make
    3 | Model
    Why Use a Vehicle Fit Guide?
    Where to find vehicle info | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    2 | Make
    3 | Model
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo