In-Car Full Digital Sound Processor and Pair of High Res Tweeters
• Z3 Processor
• Custom Developed LSI
• Modern Black Aluminum Finish components
• 32-Bit SHARC® DSP (Digital Signal Processor)
• Full Digital Tweeter
• 1" Polyester Fiber Soft Dome Tweeter
• Commander Control Module
• Z3 Processor
• Custom Developed LSI
• Modern Black Aluminum Finish components
• 32-Bit SHARC® DSP (Digital Signal Processor)
• Full Digital Tweeter
• 1" Polyester Fiber Soft Dome Tweeter
• Commander Control Module
The Z3 system is designed to improve full digital playback quality. The Z3 system consists of the Z3 processor, Full Digital Tweeters and the Commander Control Module. This is the perfect start for the Full Digital Sound system by Clarion. Adding the NX706 Full Digital Sound head unit, Z7 speakers and Z25W subwoofer will give you the Full Digital Sound System.
The Full Digital Sound (FDS) maintains the digital signal up until you hear it so there is no loss in fidelity of the signal. The system is extremely efficient, using about 1/5th of most car audio systems. The LSI is a high output microchip that transforms electrical energy into sound pressure to further boost the output of digital sound. The Z3 processor accepts various digital and analog inputs and outputs so the system can be used with different sources including car stereos.
With a traditional system, digital-to-analog conversion turns the digital signal into an analog signal that’s boosted by an amplifier to drive the speakers. The Clarion Full Digital Sound System uses an LSI (Large Scale Integration) chip on each speaker to modulate the 12-volt power supply voltage which then drives the speaker - adding the program and power together.
The DC voltage and digital information essentially travels along the same wires. The voltage and digital combines via the LSI chip. The speaker's 6 voice coils combine their driving energies together to transform the electrical signals to mechanical motions to produce sound. This allows the system to draw little current which is ideal for vehicles without a lot of extra power for a big sound system.
Best selling similar products
Axxess AXDSPX-ETH1 Digital signal processor and T-harness
• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Designed for Ethernet amplifiers
• Independent high pass, low pass, and bandpass filters
$499.99
• DSP package fits select 2013-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for amplified models
• Retain features with a built-in interface
• Selectable 31 band graphic EQ or 5 band parametric EQ
• Can be used with OE and aftermarket radios
$389.99
JL Audio FiX 86 Digital Sound Processor
• OEM Integration DSP with Automatic Time Correction and Digital EQ
• 8 Channel inputs
• 2 Channel Stereo RCA outputs
• 24-bit DSP processor
• Dual 1/3 octave equalizers
• Dimensions: 4.29"W x 6.14"D x 1.85"H
$499.99
• 8 Channel System Tuning Digital Sound Processor
• 10 Band Graphic and Parametric Equalizer
• Variable high pass and low pass filters
• Ability to configure delay and offset in time or distance units
• DRC-200 wired remote control included
$549.99
• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments
$109.99
• 31 Band Parametric and Graphic EQ
• 6-Channel RCA Outputs
• Provides up to 4 Volts of output
• USB-2-USB connector for PC
• Compatible with the KTX-CSP1 PC Mic Tuning Kit (sold separately)
$399.95
• 31-Band Parametric or Graphic Equalizers
• 12-channel high-level and 2-channel RCA outputs
• HPF/LPF/Bandpass crossover filters
• Controllable via PC software or Alpine music application
• Hi-Res Audio certified
• Compatible with Tesla vehicles
$1299.95
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
$38.99
• 31 Band graphic EQ
• 6 Inputs, 10 individually assignable outputs
• Selectable high and low-level inputs
• Each channel has an independent two-way/three-way crossovers in-line with the EQ
• Each channel can be delayed independently up to 10ms
$289.99
Axxess AXDSPL-HN3 Digital signal processor and T-harness
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
$299.99
Internal Product ID:
106651
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Clarity is real
You heard the hype and the skeptical part of me says yeah right.. digital audio.. welp, it lived up to the hype. I have these in my ride along w/ the full FDS system and I have never owned a better system. 5/5
1
found this helpful.This item is frequently compared to these items
• Digital Sound Matrix Processor
• Allows users to truly optimize the performance of their audio system
• Line-level and Digital audio inputs
• 30 bands of equalization
• Dimensions: 10.5"W x 5.7"D x 1.6"H
$779.00
• 125 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class 2 ohm Stable 4-Channel-Channel Amplifier
$576.00
• 125 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier
$677.70
