600W Peak (200W RMS) 6.5" Mobile Monitor Series 2-way 4-ohm Car & Marine Coaxial Speakers
• 300 watts Peak Each, 100 watts RMS Each
• IP56 marine certified, with weep holes for proper drainage
• 1" Terylene Dome pivoting tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 300 watts Peak Each, 100 watts RMS Each
• IP56 marine certified, with weep holes for proper drainage
• 1" Terylene Dome pivoting tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
|
Polk MM1 Series Speakers |
|---|
It doesn't matter whether your next destination is the road, the lake, the trails or the dunes. Polk's MM1 series speakers are built to not only withstand whatever environment they're thrown into, but to make your ears happy through all of it.
Polk's Mobile Monitor speakers are rugged and built for all kinds of outdoor settings. The IP56 ultra marine certification means all parts - the surround, the cone, the basket and everything else - can withstand dirt, dust and water without any serious side effects. They're ready for your boat, ATV or anything else designed for exposure to the elements. Add in a non-corrosive fiberglass reinforced ABS basket, and these MM1s are ready for the long haul.
Not looking for outdoor adventure? These MM1 speakers are still built to outperform your factory drivers in your daily vehicle. Check out that crossover built onto the speaker. While two- or three-way speakers have crossovers mounted on, they're not usually this robust. Add a pivoting 1" tweeter to customize your sound, oversized voice coils and more, and your next drive will sound a whole lot better. Built-in Dynamic Balance Technology helps eradicate distortion and enrich the tone.
Don't put off that sound upgrade any longer. Polk's MM1 series offers a simple solution with anything-but-simple sound. Drop a pair of these in your cart and be prepared for your next adventure.
Priced Per Pair
|
(newest, current model)
|
|
(previous model, replaced by Polk Audio MM652 (MM 652))
|
|
(previous model, replaced by Polk Audio MM651)
|
This product is temporarily out of stock. May we recommend...
• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(114)
$76.96
List price $99.99
• 90 watts Peak Each, 45 watts RMS Each
• 1/2" Piezo pole-mounted Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
(145)
$79.99
List price $79.99
• 240 watts Peak Each, 80 watts RMS Each
• Hi-Res Audio-certified
• 1" Cloth Dome tweeters
• Polypropylene, Glass Fiber and Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(5)
$119.95
List price $180.00
• 75 watts Peak Each, 50 watts RMS Each
• 3/4" Silk-suspended Aluminum Dome ferrofluid-cooled tweeters with neodymium magnets
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
(33)
$119.99
List price $119.99
• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
(10)
$44.99
List price $53.99
• 240 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(27)
$79.99
List price $89.99
• 100 watts Peak Each, 50 watts RMS Each
• 1" Silk Dome tweeters
• Polypropylene cone material with reinforced stamped pattern
• Impedance: 4 ohm
• Sensitivity: 87 dB
$119.99
List price $129.99
• 175 watts Peak Each, 35 watts RMS Each
• Mylar Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(2)
$44.95
List price $99.99
• 110 watts Peak Each, 55 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material with Vertical Attach Surround Technique (VAST)
• Impedance: 4 ohm
• Sensitivity: 88 dB
(60)
$99.99
List price $109.99
• 340 watts Peak Each, 60 watts RMS Each
• 1" PEI Polypropylene Balanced Dome tweeters
• Graphite-injected Reinforced Spun cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(43)
$54.99
List price $69.99
Manufacturer:
Model Number:
MM652
Weight:
3.00lbs
Internal SKU:
mm652
Internal Product ID:
133879
| 5 star |
|
89% |
| 4 star |
|
11% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Polk Audio MM652 - MM1 Series 6.5" Coaxial Speakers
Polk Audio MM652 is the best marine grade speakers I've ever used in $150 to $200 price range. I use then in my boat and UTV.
Verified purchase
37 found this helpful Helpful?
great product
good product , loud and clear sound , marine product excellent . will recommend the product .
38 found this helpful Helpful?
Sound so great on all volume levels
I'd recommended for sure and also recommend running on an amp to get the full specs of these speakers. They sound great even at low volume, the bass still kicks good. Just what I wanted out of them, so it was the right purchase for my needs. Good solid sound.
35 found this helpful Helpful?
Best bang for buck
Great speakers for anyone looking to upgrade their factory Harley Davidson speakers. Way better than the boom audio upgrades.
Verified purchase
34 found this helpful Helpful?
Awesome Speakers
These Speakers are awesome. Best ones I have found. I would highly recommend.
Verified purchase
34 found this helpful Helpful?
Polk Audio MM652 - MM1 Series 6.5" Coaxial Speakers
Polk audio,great sound quality and marine grade components, only way to go!
34 found this helpful Helpful?
Robust music for open spaces.
Installed in a Wrangler YJ in a front sound pod. Selected for Marine rating and good 'sound' reviews...Yes! Excellent for my open bodied ride with plenty of clear, crisp volume from the Sony head unit. Overcomes road noise quite well without needing to go into nuclear sound mode.Installation was straightforward, but the grilles needed a 'touch' modification in my specific install. The sound range is substantial, but I will add in a sub shortly to compensate for road and exhaust noise on the bottom.
Verified purchase
34 found this helpful Helpful?
It’s Polk audio can’t go wrong
Great sound with an amp giving its RMS. Polk always has quality products.
34 found this helpful Helpful?
Excellent
I added these to my boat along with 2 pairs of infinity marine speakers. The infinity speakers sound very good and are 1/2 as much but these sound great. I would highly recommend.
The only negative I can think of is the grill is designed with relatively large hole where the speaker could get damaged. Hopefully this own happen
Verified purchase
32 found this helpful Helpful?
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(43)
$14.99
List price $18.74
NVX SDSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(104)
$9.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(38)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(47)
$43.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(117)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(18)
$11.99
List price $14.99
NVX 25 ft. of True Spec 12 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(50)
$29.99
List price $49.99
Belva 23 ft. of True Spec 12 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(42)
$6.99
List price $14.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(42)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(69)
$11.99
List price $18.99
Universal 6.5" Speaker Grills Sold as Pair
Protect your speakers with these mesh grills
(8)
$10.99
List price $12.49
6-1/2" (13.5 cm) S-Series Speaker Grills
Protect your speakers with these mesh grills
$24.00
List price $30.00
