Full Audio System Upgrade Kit for 2011-2018 Jeep Wrangler Unlimited, Wrangler Unlimited (JK) Includes Pair of 6.5" Convertible Speakers, One Loaded Subwoofer Enclosure and Two Amplifiers
Product highlights
• Includes two 6.5" convertible speakers, one loaded 10" subwoofer enclosure, 2 amplifiers, one remote bass knob, and vehicle-specific harnesses and brackets
• Compatible with 2011-2018 Jeep Wrangler Unlimited, Wrangler Unlimited (JK)
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
Looking for a premium sound system for your Jeep Wrangler JK? Look no further than the Alpine PSS-22WRA. Specifically designed for 2011-2018 Jeep Wrangler JK Unlimited models, this 1200-watt, 9-speaker sound system delivers outstanding sound performance both with the top on or off.
Don't worry about being caught in inclement weather with the top off, as the PSS-22WRA is IP55 rated to withstand rain, wind, and dust. The subwoofer uses rust-resistant hardware and can handle water from off-roading adventures or a quick rinse down.
Alpine's exclusive Dynamic Peak Power (DPP) amplifier technology and 10-inch under-seat subwoofer enclosure deliver excellent sound performance that will turn heads. The PSS-22WRA loads and disperses lower frequency sound from the passenger's foot well area, maximizing bass extension throughout the Jeep for an exceptional audio experience.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
153849
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Awesome
the sound is clear and clean. 100 time better than OEM speakers set up.
36
found this helpful.Well put together kit
(NB located in UK not IL)
This kit has been very well thought out, instructions were a little vague in places but the Alpine install video on YouTube filled in most gaps.
I struggled a little with routing of loom and location of amps as fitting to a RHD JKU (steering wheel and battery located on opposite sides to instructions) but got there in the end.
Made decent time fitting all the speakers and in 3.5 hrs I was testing system prior to running loom and fitting amps, remains part of install took another 4 hrs to suss out but got there in the end.
Tape used on the loom was horrible as had gone all sticky and left residue all over hands etc.
Still need to tweak the sub settings a little to get it perfect, but it’s very close and not looking forward to taking the amps back out to do it so it can wait a week or so.
Sound is a massive step up over the standard kit and although it’s not audiophile quality, it is very listenable and was always going to be a compromise utilising existing speaker locations etc and wedging a sub under the seat.
Although a little overpriced imho it keeps the usability of the Jeep by not intruding into interior space and makes it a much more enjoyable place to spend time...and even sounds good with the Sunrider flipped open.
Verified purchase
34
found this helpful.Best selling similar products
• 225 watts Peak Each, 75 watts RMS Each
• Compatible with select 2007-2018 vehicles from Jeep
• 1" Teteron Dome tweeters
• Impedance: 4 ohm
• Sensitivity: 88 dB
• IP55 weatherproof rating
$219.95
• Includes four sets of midrange component speakers, one 10" loaded subwoofer enclosure, one 12-channel DSP and vehicle-specific harnesses
• Direct fit for a hassle-free installation, fitting perfectly into the 2022-Up Tesla Model 3 with Factory Base Audio for seamless integration
• Efficiently designed amp uses less than 1 mile of range per hour at full volume
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
$2999.95
• 120 watts Peak Each, 50 watts RMS Each
• Compatible with select 2002-2025 vehicles from Ram, Toyota, GMC
• Silk Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 83 dB
$59.00
• Peak Power: 100 watts per channel
• Two 4" long excursion woofers
• 2" high-output tweeter per channel
• IPX6 waterproof and splashproof rating
• Mounting clamps, inserts and quick release brackets included
$179.99
• Designed for (Rockford Fosgate 18WRNGLER-STG5)
• Compatible with 2018-2025 Jeep Wrangler Unlimited, Wrangler Unlimited 4xe, Wrangler Unlimited (JL)
• Built to stand up to water, dirt, mud and UV rays
• Uses factory mounting locations for easy install
$399.99
• Peak Power: 100 watts per channel
• Two 4" long excursion woofers
• 2" high-output tweeter per channel
• IPX6 waterproof and splashproof rating
• Mounting clamps, inserts and quick release brackets included
$179.99
• Includes two front speakers, two rear soundbar speakers, one amplified subwoofer, one 4-channel amplifier, mounting brackets and wiring harnesses
• Direct fit for a hassle-free installation, fitting perfectly into the select 2018-2023 vehicles from Jeep for seamless integration
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
$1999.95
• 300 watts Peak Each, 100 watts RMS Each
• 6x9" Woofer and 2.75" Midrange
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB
• Custom fit for select 2002-2025 vehicles from Toyota, Ram, GMC
$191.50
• 225 watts Peak Each, 90 watts RMS Each
• Rear soundbar upgrade kit for select 2018-2023 vehicles from Jeep
• 1" Teteron Dome tweeters
• Polymer cone material
• Impedance: 4 ohm
• Sensitivity: 87.8 dB
$499.95
