Rear-view Integration for Porsche Vehicles w/ PCM 3.1 Navigation Systems
Product highlights
• Rear-View Integration for Porsche Vehicles
• Compatible with Select Porsche Vehicles
• Plug and Play Installation
The CRUX PCM-3 is a Rear-vision integration system and VIM enabler for Porsche vehicles with PCM 3.1 Navigation Systems. (It is also compatible with PCM 3.0 Systems in Cayenne only.) It seamlessly integrates with the factory installed system.
Authorized Usage/Limitations: This product should only be used while vehicle is stationary or when displaying fixed menus or for viewing rear-vision camera video when the vehicle is moving.
Product Liability Disclaimer: This unit must not be used for watching moving pictures while driving which is also prohibited by law in many States and localities. CRUX Interfacing Solutions and its distributors/dealers shall not be held liable for any consequential, incidental and contingent damages arising from misuse, but not limited to material damage or personal injury resulting, directly or indirectly due to any unauthorized usage of this product.
End User Agreement : End user agrees to utilize this product in accordance with the above mentioned stipulations and in compliance with all Local, State and Federal laws.
Compatible Navigation Radio System:*PCM SOFTWARE MUST BE MINIMUM 4XX OR HIGHER
Crux PCM-3 owner’s manual
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
• Backup camera add-on and retention T-harness
• Plugs into the factory harness
• Compatible with select 2014-2025 vehicles from Toyota, Scion
$47.99
List price $63.00
• AV Cable for Aftermarket Backup and Front View Camera Integration
• Compatible with VLine VL2 Navigation, Infotainment and CarPlay/Android Auto integration system
• Adds a 3.5mm aux connection from your VLine VL2 unit
$13.99
List price $13.99
• Front and rear view integration interface
• Fits select 2008-2025 vehicles from BMW with 6-Pin LVDS connector
• Supports stereos with 6.5", 7", 8.8", 10.25" screens
• Provides rear view and front view camera input
• Compatible with all factory video accessories
• Hassle-free plug and play installation
$369.95
List price $597.95
• Adds a video input for direct connection to OEM navigation
• Original Equipment Manufacture connector housings are used to ensure perfect connection
• 4 Pin connector
$22.99
List price $23.00
NAV-TV PCM 3.1 XG-CAM KIT (NTV-KIT375)
• Plug-n-Play Backup Camera Interface Module
• Compatible with Select 2011 and Up Porsche Vehicles
• Allows Aftermarket Backup Camera to Integrate with the PCM3.1 Model Radios
(1)
$699.00
List price $799.00
• Retains the factory backup camera to an aftermarket radio
• Allows an aftermarket camera to be added to the OEM screen (Display and navigation model radios only)
• Includes the AXCSD-6V 12-volt to 6-volt converter
$29.99
List price $58.00
• Adds front and backup camera.
• Adds an extra video input.
• Uses the steering wheel control buttons to toggle between the sources.
• Retains factory backup camera.
• Dimension: 5" L x 2.5" W x 8.8" H
(1)
$247.05
List price $384.30
NAV-TV RGB-VW KIT (NTV-KIT389)
• Rear View Camera Interface
• For Use with Select Volkswagen Vehicles
• Add an Aftermarket Backup Camera to the Factory Navigation Screen
$399.00
List price $449.00
• Seamlessly Integrates with the Factory Installed System for adding Front, Rear, 2 Side and Wireless Cameras
• 6 Video Inputs
• 1 Audio/Video Inputs
• Uses the Steering Wheel Controls Buttons to Toggle Between the Sources
• Dimension: 5" L x 2.5" W x 8.8" H
(1)
$356.40
List price $554.40
Manufacturer:
Model Number:
PCM-3
Weight:
0.70lbs
Internal SKU:
pcm3
Internal Product ID:
157019
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
