MTX 5510-44 10" 800 Watt DVC Car Audio Subwoofer Sub+Mono Amplifier+Amp Kit

800W Peak (400W RMS) 10" 55 Series Dual 4 Ohm Subwoofer Package

MTX
Shop all MTX
highlight-star-icon

• 800W Peak
• 400W RMS
• Dual 4 ohm Voice Coil
• Polypropylene Cone
• Rubber Surround
• Spider Plateau Venting Mechanically Cools the Voice Coil
• Radial Ribbed T-Yoke Dissipates Heat and Decreases Distortion

Learn more about the mtx-551044_tc4kit8b_pd15001

We apologize

This item has been discontinued

Description


MTX

Authorized dealer

MTX Audio 55 Series Subwoofer

MTX 5510-44 55 Series Subwoofer

The MTX Audio 55 Series subwoofers are the perfect solution for improving your car sound quality while taking up little space. Their low profile means they do not need a large enclosure and will still deliver powerful bass. How do they do this? With an improved surround compared to traditional Half-Roll surrounds, expanded surface area and reduced distortion due to progressive suspension controls. With over 40 years of audio experience, MTX Audio makes sure and knows how to create quality audio with their products, and the 55 Series is no exception!

MTX Inverted Apex Surround

MTX Inverted Apex Surround

The MTX Inverted Apex Surround increases the surface area of the sub to allow for more air movement, accurate bass reproduction and higher SPL. Traditional Half-Roll Surrounds have an inherent wrinkling when reproducing bass due to the physics of its motion, which causes distortion. The Inverted Apex Surround moves symmetrically through both positive and negative cycles which eliminates this type of distortion.



Progressive Suspension Control

MTX Audio Series Subwoofer

Progressive Suspension control the excursion of the subwoofer at high power levels which reduces distortion. Eliminating this 3rd order distortion means you can play your music loud and rely on your subwoofer to take of itself.



Radial Ribbed T-Yoke

MTX Audio Series Subwoofer

Two features really make sure the MTX subwoofers stay cool: the Spider Plateau Venting and the Radial Ribbed T-Yoke. The Spider Plateau Venting is a mechanical cooling process that targets cool air at the voice coil. This means the subwoofer cools itself as it is playing. The Radial Ribbed T-Yoke acts as a heat sink that dissipates heat and decreases distortion.





MTX 5510-44

800W Peak (400W RMS) 10" 55 Series Dual 4 Ohm Subwoofer
Quantity: 1

General Features:

  • 10" 55 Series Subwoofer
  • Power Handling:
    • Peak: 800 watts
    • RMS: 400 watts
  • Recommended power range: 200 - 400 watts RMS
  • Impedance: Dual 4 ohms
  • Polypropylene cone
  • Rubber surround
  • Spider plateau venting which mechanically cools the voice coil
  • Radial ribbed t-yoke dissipates heat and decreases distortion
  • Expanded surface area allows for increased volume displacement and SPL
  • Progressive suspension controls excursion at high power reducing distortion
  • Inverted Apex surround with symmetrical geometry controls cone movement
  • 2.0" High temperature voice coil
  • Frequency response: 29-130 Hz
  • Resonance Frequency (Fs): 33.6 Hz
  • Top-mount depth: 5-3/16"
  • Sensitivity: 90dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BAK82

8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED
Quantity: 1

Product Details:

  • Complete 8 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 600 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 60 amp fuse
  7. One Black rubber firewall grommet
  8. One 8 Gauge Red chrome plated ring terminals
  9. One 8 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Red Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Crunch PD1500.1 (PD 1500.1)

1500W Max Power Drive Series 2-Ohm Stable Monoblock Amplifier
Quantity: 1

General Features:

  • Crunch Power Drive PD 1500.1
  • Class-A/B 2-Ohm Stable Monoblock Amplifier
  • Max Power Rating:
    • 4 ohms: 750 watts x 1 chan.
    • 2 ohms: 1500 watts x 1 chan.
  • Total power output: 1500 watts
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • 2 or Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Quick Thermal Dispersion Technology adds more mass to aluminum heat sink to run cool
  • Input sensitivity: 0.2V - 6V
  • Variable low-pass filter: 40 - 300 Hz
  • Subsonic Filter: 10 - 40 Hz
  • Variable Bass Boost: 0 to +12 dB bass boost
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 11.4"W x 17"L x 3.8"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the Power Drive Quick Start Installation Manual

Product history:

MTX 5510-44, TC4KIT8B, PD15001 thumbnail
(newest, current model)
MTX TR5510-44 thumbnail
(previous model, replaced by MTX 5510-44 10" 800 Watt DVC Car Audio Subwoofer Sub+Mono Amplifier+Amp Kit)
MTX T5510-44 thumbnail
(previous model, replaced by MTX Audio TR5510-44)

This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.

Specifications & Details


Subwoofer Specifications
Series
55 Series
Subwoofer Size
10"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
400 watts
Peak Power Handling
800 watts
Woofer Surround
Rubber
Woofer Composition
Polypropylene
Sensitivity
90 dB
Frequency Response
28 - 130 Hz
Xmax (millimeters)
15.24 mm
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

MTX

Model Number:

5510-44, TC4KIT8B, PD15001

Weight:

21.30lbs

Internal SKU:

mtx-551044_tc4kit8b_pd15001

Internal Product ID:

158901

Customer Ratings & Reviews



5 star
70%
4 star
23%
3 star
7%
2 star
0%
1 star
0%



Durability
4.7
Value
4.7
Features
4.6
Design
4.7
Usability
4.7

Customer Reviews

Sort by:

Loading...

BAK 82

The following review is for BAK82, which is a part of the bundle you are viewing.

Nice package, quality wire but could more end connectors for the larger wire.

By Sam on June 19, 2014

137

found this helpful.

Good product

The following review is for BAK82, which is a part of the bundle you are viewing.

It's exactly what you need for your car amp installation. I bought this kit with Kenwood KAC-1502S amp for 75 bucks. Good deal from Sonic Electronix.

By Collins on January 6, 2014

126

found this helpful.

Don't know what the other guy is talking about.

The following review is for BAK82, which is a part of the bundle you are viewing.

This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.

The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.

I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.

Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.

All in all, you will not get a better value for the money.

By Double Down on August 14, 2012

115

found this helpful.

Great kit for the cost

The following review is for BAK82, which is a part of the bundle you are viewing.

Very nice kit for $18.
Wire seems adequately thick. Good quality fuse (not AGU) and fuse holder. RCA's feel durable. Decent assortment of accessories. All together a solid budget kit IMO.

By n2audio on September 24, 2014

120

found this helpful.

Good product for the price

The following review is for BAK82, which is a part of the bundle you are viewing.

Good wiring package, good quality fuse holder and wires, I would like more connectors on it and maybe some tube for the power wire, but overall is a good kit.

By Alfredo on October 29, 2014

116

found this helpful.

Good Purchase

The following review is for BAK82, which is a part of the bundle you are viewing.

I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.

By Jumbo Dumbo on December 19, 2013

109

found this helpful.

Good kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.

Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.

Cons: None

I would recommend this kit to anyone who has a simple system. All around good kit.

By Mitch on January 31, 2014

116

found this helpful.

Great wiring kit

The following review is for BAK82, which is a part of the bundle you are viewing.

works great on my MB Quart 2x100 watt amp.

By Eric on November 29, 2013

108

found this helpful.

Good Kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Great kit for the price. the price is good. Long wires.

By Joshua on December 8, 2013

108

found this helpful.

Belva BAK82

The following review is for BAK82, which is a part of the bundle you are viewing.

Worked very well for the money, great value for my system! Only thing that kept me from giving this 5 stars across the board is the design of the fuse holder and how you have to change/connect the fuse, minimal complaint.

By Dwight on April 9, 2014

104

found this helpful.

Add-ons


Similar Products


Best selling similar products

Belva BPKG212v2 Complete Amplified Bass Package

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(75)

$249.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(150)

$279.95

Belva BPKG110v2 Complete Amplified Bass Package

• Works with both Factory and Aftermarket Audio Systems
• Single 10" Belva Subwoofer
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(24)

$129.99

Cerwin-Vega BKX212S

• XED Series Bass Package
• Two 12" Subwoofers with 2" Voice Coill
• 400W RMS Monoblock Amplifier
• Carpeted and Embroidered Enclosure

(1)

$329.99

JL Audio Thin-Line 12TW3-D4 + FREE NVX 500W Monoblock Amplifier

• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements

(17)

$533.13

Related Searches


5510-44, TC4KIT8B, PD15001 small

Item added to your cart.

Price: $216.99

Essential add-ons
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$129.99

Add to cart
Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

$79.99

$59.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$197.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back