(2) NVX VCW104 + Sealed box + Mono Amplifier + Amp Kit

Product Details:

• 10" Dual 4-ohm VC-Series Car Subwoofer
• Power Handling:
• Peak: 1600 watts
• RMS: 800 watts
• Recommended Power Range: 650 - 800 watts watts RMS
• Impedance: Dual 4 ohm
• Carbon Fiber dust cap
• Pressed paper cone with carbon fiber top
• Custom High Roll Foam Surround with Nylon Stitching
• Heavy Duty Die Cast aluminum basket for maximum rigidity
• Dual Progressive Spiders with Integrated Tinsel Leads and Bolt Down Ring
• Bolted down
• 2.5" High Temperature Aluminum Voice coil
• 127oz. Triple stacked Ferrite magnet motor structure with protective rubber boot
• Frequency response: 20-200 Hz
• Resonance Frequency (Fs): 29 Hz
• Optimal sealed box volume .70 cubic feet
• Optimal ported box volume: 1.50 cubic feet
• Top-mount depth: 6"
• Sensitivity: 83dB
• VCW10GR protective subwoofer grill available (Sold Separately)
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

General Features:

• Dual Sealed 10" Enclosure
• Internal box volume: 1.6 cubic ft. total air space - 0.8 cubic ft. per chamber
• High Quality 3/4" MDF Construction
• Durable black carpeting
• Pre-lined with Poly-Fil
• Seams are fully caulked for better efficiency
• 2 Separate chambers allowing each subwoofer its own air space
• Gold post terminals for clean and easy wiring access
• Box Dimensions: 25"L x 12-1/2"D x 12-1/2"H
• 30 Day return policy

Product Details:

• 1/0 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 2000 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• ANL Fuse holder with a 150 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Blue 1/0 gauge power wire
2. 3 ft. (.91 meters) Black 1/0 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. One ANL Fuse Holder with a 150 amp ANL fuse
6. One Black rubber firewall grommet
7. Three 1/0 Gauge Blue chrome plated ring terminals
8. One 1/0 Gauge chrome plated ring terminal
9. One 18 Gauge Blue Spade terminal
10. One 18 Gauge red butt connector
11. Eight 6" Black zip ties

General Features:

• Crunch Power Drive PD 3000.1
• Class-A/B 1-Ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohms: 750 watts x 1 chan.
• 2 ohms: 1500 watts x 1 chan.
• 1 ohm: 3000 watts x 1 chan.
• Total power output: 3000 watts
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Mono channel operation
• Speaker-level (high-level) inputs
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Quick Thermal Dispersion Technology adds more mass to aluminum heat sink to run cool
• Input sensitivity: 0.2V - 6V
• Variable low-pass filter: 40 - 300 Hz
• Subsonic Filter: 10 - 40 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• 0 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 11.4"W x 19"L x 3.8"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty