12" Single Voice Coil 4 Ohm
• RX2 Series 12" Single 4 Ohm Subwoofer
• 200w RMS power
• 25mm of Peak to Peak Excursion
• Phoeniroll Surround Technology
• UNICAP Technology
• Optimized for Sealed or Vented Enclosures
• Torriform Voice Coil Technology
Packaged weight: 12.79lbs
View the RX2 Series Subwoofer Manual for detailed specs, wiring diagrams, enclosure recommendations, and more!
Phoenix Gold subwoofers are over-engineered and overbuilt in virtually every way conceivable. It is important that the subwoofer’s enclosure is built to these same exacting standards. The enclosure must be constructed of at least .75 inch MDF. Screws or air staples are excellent construction fasteners when used with a strong bonding “yellow” woodworking glue that can fill joint gaps. Be sure that the enclosure’s panels are airtight at all joining seams. Lining the walls with a polyester matting 1 to 3 inches thick is sufficient. RX2 subwoofers have vented pole pieces, we recommend leaving a minimum of 0.5” clearance behind the subwoofer to allow proper air movement and cooling of the voice coil.
Internal Product ID:
165359
Best selling similar products