80W Peak (50W RMS) 3.5” C2 Series 2-way 4-ohm Coaxial Car Speakers
Product highlights
• 40 watts Peak Each, 25 watts RMS Each
• 3/4" Silk Dome tweeters
• Injection-molded Polypropylene with Mica cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-350x system features 3.5-inch (90 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Priced Per Pair
Internal Product ID:
17149
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Nice
Nice crisp detailed speakers, doesn't distort or clip at high volumes like my stock speakers were doing, after I replaced these 2 small speakers I had to upgrade the rest of my speakers because these just outshined them so hard....
62
found this helpful.Perfection!!!
I have been using JL Audio products for quite some time now. These speakers remind me of just why I buy JL Audio. They have the most crisp sound with practically NO distortion! They have a great power handling ability & will surely impress anyone who sits in your car & listens to them.
59
found this helpful.Solid
The first thing I noticed is how huge the magnet is. It's about the size of the whole speaker. And, it's shielded with thick rubber which is a nice touch.
Sound is great.
57
found this helpful.Big sound / Small package
I was looking for some 3.5" speakers to replace the ones in the dash of my 2012 Ram. These not only dropped right in, but thanks to their lower impedence (4ohm over 8) and higher power handling, they absolutely scream! They're so much cleaner/louder in fact, that you'll probably have to adjust your equalizer and fade settings to get the sound where you want it. All in all, I'm quite pleased.
53
found this helpful.Great sound
Speakers have great highs and lows and can handle the power.
Verified purchase
43
found this helpful.crisp clean soundi am talking QUALITY SPEAKERS
These are the best speakers I have ever owned..highly recommend them
Verified purchase
40
found this helpful.Great Speakers
I ordered these to replace the 33+-year-old dash speakers when I already had the dash out. Delivery was very quick and they work great!
36
found this helpful.Good sounding speakers.
Speakers are clear and were a direct fit in my Challengers dash.
36
found this helpful.Great little speakers
Put two in per side to replace 4x10’s my head unit couldn’t drive them in parallel so I figured the impedance was too low. I wired them in series and the head drove them easily. Loud with less distortion than the 4x10 cleaner
38
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
Infinity REF307F (INFSPKRF307FUS)
• 75 watts Peak Each, 25 watts RMS Each
• 1/2" Textile Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohms
• Sensitivity: 91 dB
$74.95
• 40 watts Peak Each, 20 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 85 dB
$79.99
• 250 watts Peak Each, 30 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Graphite-Injected Reinforced Spun cone material
• Impedance: 4 ohms
• Sensitivity: 84.5 dB
$54.99
• 90 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material with EVC (Extended Voice Coil) technology
• Impedance: 4 ohms
• Sensitivity: 88 dB
$59.99
• 40 watts Peak Each, 23 watts RMS Each
• Paper Whizzer tweeters
• Paper cone material
• Impedance: 4 ohms
• Sensitivity: 89 dB
$29.99
• 100 watts Peak Each, 50 watts RMS Each
• 1/2" Silk Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
$79.99
• 80 watts Peak Each, 20 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material with EVC (Extended Voice Coil) technology
• Impedance: 4 ohms
• Sensitivity: 88 dB
$49.99
• 75 watts Peak Each, 25 watts RMS Each
• Silk Edge-driven Dome tweeters
• Injection Molded Polypropylene with UV Protection cone material
• Impedance: 3 ohms
• Sensitivity: 89 dB
$79.95
• 75 watts Peak Each, 25 watts RMS Each
• Textile Edge Driven Dome tweeters with adjustable output level
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohms
• Sensitivity: 91 dB
$79.95
This item is frequently compared to these items
• 25ft. 16 AWG Premium Series Speaker Cable
• OFC Copper for flexibility and conductivity
$29.99
• 100 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome tweeters with neodymium magnet and ferrofluid cooling
• Mica Injected Polypropylene - MIPP cone material, with flat, symmetrical roll spider
• Impedance: 4 ohms
• Sensitivity: 92 dB
$249.99
• 100 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome tweeters with ferrofluid cooling and neodymium magnets
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohms
• Sensitivity: 90.5 dB
$249.99
• 100 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome tweeters with ferrofluid cooling and neodymium magnets
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohms
• Sensitivity: 94 dB
$249.99
• 125 watts RMS Each
• 3/4" Silk Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohms
• Sensitivity: 96 dB
$279.99
